Product features of eccentric hemispherical valve - Wuzhong instrument

The angular displacement of the valve position detected by the valve limit switch box changes the transmission shaft through the coaxial adjacency or the reaction rod, so that the cam touches the miniature switch, so that the contact of the switch assembly is closed or disconnected, and the switching signal is transmitted to the outside through the terminal, and the passer is displayed on the spot. ...

1. The signal valve pushed by the control box does not move. Under the condition that the positioner is installed, the pneumatically adjustable butterfly valve is equipped with a solenoid valve. The weak current of the solenoid valve affects the information output of the control box, and the valve cannot withstand the data signal and cannot work normally. ...

(1) The sealing pair is spherical, disc bias reversal planning The valve sealing pair is spherical and has a good sealing effect. Together with the disc rotation center is planned to have a bias with the center of the valve seat, so the valve disc and the valve seat constitute a sealing effect of the bias cam wedge when closed, and the valve ...

1. The sealing surface is uneven and cannot constitute a sealing line: 2. The connection between the valve stem and the closure is suspended, irregular or worn; 3. The valve stem is tortuous or the assembly is not correct, so that the closure is skewed or mismatched: Fourth, the sealing surface raw materials are not selected properly or not according to the working conditions.

The conditioning valve, also known as the control valve, is a device that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the conditioning pipeline medium in the field of industrial automation process control. It is mainly composed of the operating fulfillment mechanism and the regulating valve body, which receives relevant signals and changes the opening of the valve.

1. Remove the nut and identification plate at the upper end of the valve stem, and look at the lock nut raw material inside, the raw material is brass, otherwise it is a counterfeit product. 2. Look at the steel seal, the valve steel seal is pressed on it before the valve has passed the heat treatment, and the professional steel seal skills are used.

The control valve, also known as the control valve, is a device in the field of industrial automation process control that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the pipeline medium.

In the field of industrial automation process control, the conditioning valve, also known as the control valve, is the final control element that changes the process parameters such as medium flow, pressure, temperature, and wave level by means of dynamic operation by bearing the control signal output by the conditioning control unit. It is generally composed of a drive actuator and a valve ...

　　Selection: The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. The butterfly valve has a simple structure, small size, light weight, only a few parts, and only needs to rotate 90° to quickly open and close, the operation is simple, and the ...

The self-operated control valve, also known as the self-operated control valve, is based on the pressure and temperature of the medium flowing through the valve itself as an energy source, and uses the reaction signal (pressure, pressure difference, temperature) at the output end of the valve to be transmitted to the actuator through the signal tube, and then drives the valve disc and then changes the opening of the valve to achieve the adjustment pressure.

　　Technical characteristics of single eccentric sealed butterfly valve In order to solve the extrusion problem of the butterfly plate and the valve seat of the concentric butterfly valve, a single eccentric butterfly valve is produced, and its structural characteristics are that the shaft of the valve stem deviates from the center of the butterfly plate, so that the upper and lower ends of the butterfly plate are not ...

1. According to the processing requirements, some parts need to be polished, and there can be no processing burrs on the appearance; 2. All parts are degreased; 3. After the degreasing is completed, pickling and passivation will be carried out, and the cleaning agent does not contain phosphorus; 4. Rinse with pure water after pickling and passivation.

It is composed of a pneumatic O-type shut-off ball valve and a pneumatic double-acting actuator. It has the advantages of simple structure, small size, light weight, convenient operation, etc., and can be widely used in automatic conditioning and long-distance control of industrial production processes such as petroleum, chemical industry, hydropower, and textile. ...

1. Confirm the working conditions: P1, △P, Q, T1, fluid characteristics, allowable noise, etc.; Select the appropriate ANSI pressure class for the body and trim requirements 2. Calculate the required initial Cv value, check the noise and cavitation levels 3. Select the type of trim of the control valve: if there is no noise ...

Pneumatic butterfly valve additional code: BD insulation butterfly valve, SD telescopic butterfly valve, TLD desulfurization butterfly valve, DH check butterfly valve, DKS fast butterfly valve, FDBD square louver butterfly valve; Butterfly valve code: D indicates butterfly valve Transmission code: manual ...

From the perspective of product application, hard seal ball valve defects can be roughly divided into the following two categories: non-technical faults and skill defects. The following text mainly introduces the analysis and solution of non-technical problems of hard seal ball valves; ...

1. Smooth mechanism Smoothing is to add a smoothing agent between the two conflict surfaces of relative motion, so that a smooth film is formed between the two conflict surfaces, and the dry conflict appearance that is originally directly touched is separated, and the dry conflict is a conflict between the smooth agent molecules, so as to reduce the conflict and reduce wear, ...

Now the valve market is mixed, and illegal traders pretend to be innovative valves to be shoddy in order to make huge profits, which brings great safety hazards to the device project. Therefore, it is necessary to introduce to us the inspection of innovative valves. Now the valve market dealers mainly exist in the valve counterfeiting ...

1. The valve positioner is divided into pneumatic valve positioner, electrical valve positioner and intelligent valve positioner according to the input signal. (1) The input signal of the pneumatic valve positioner is a standardized gas signal, for example, the 20-100kPa gas signal, and its output signal is also a standardized gas signal. （ ...

Valve is a kind of commonly used hardware products, the valve in the assembly and installation process also has a certain skill requirements, otherwise the assembled valve may not show its own excellent performance, what are the skill requirements of the valve in the assembly process? ...