The first thing is to see whether the signal is enough to use, for example, if you want 20KG, the signal must be more than 1.0, and it must not be used if it is calibrated to 20kg as long as it is 0.05MV. Therefore, the meaning of sensor calibration is to see if the sensor is qualified.
Calibration of the sensor. After the sensor is made, the signal is basically fixed and cannot be changed, but due to the reasonable error in the time and time of operation and production, the sensor signal of a batch is not necessarily the same. Other calibration and calibration are generally only said when the sensor is equipped with an instrument or transmitter.
Enter the calibration operation interface, select "Test Force Calibration" in the calibration drop-down list, and select the top gear (maximum range) for calibration: select the top gear (maximum range). Indication zero: It should be cleared when the force transducer is not subjected to force. Select the first calibration point: click on the row with your mouse.
(The calibration point should be calibrated in the order from small to large) to apply force to the sensor, and measure the force of the sensor at that time with a standard dynamometer; Select the second calibration point: click on the row with the mouse. Click on the other force values of the calibration point in turn, and end the calibration of the range (gear) according to the above steps.
|
More on that
|
How to debug Turck's pressure sensors
Turck's debugging method for turck pressure sensors is as follows: Using a controller with a 0.08-2MPa plan, requesting a pressure drop to 0.8MPa (down switching value) to announce the contact signal, the operation process is as follows:
Screw the product into the oil ...
|
|
Turck expands its two-wire general-purpose product range
Since September 2020, Turck has expanded its portfolio of general-purpose products to include 2-wire general-purpose inductive sensors. Since the introduction of the universal 3-wire product, the general-purpose product family has been greatly developed, and the product is now used in various types of customers. Pass...
|
|
Turck's roller conveyor belt drives control Ethernet I/O modules
The Ethernet I/O module TBEN-LL-4RMC offers four Interroll EC5000 drum motor drive interfaces, which can control up to 48 motors and is capable of driving special motors up to 48V.
In addition, the module provides 4 digital input channels and 4 general-purpose digital channels ( ...
|
|
The journey of digital upgrading of factories across the country began
The attack of the epidemic in 2020 has made more and more manufacturing enterprises realize the importance of industrial automation transformation and upgrading. In order to help more manufacturing users to develop smartly, Turck has also restarted the 4th National Factory Digitalization Solutions Tour.
...
|
|
Precautions for sensor use – Turck sensors
Precautions 1, in the use of the sensor to prevent contact with some corrosive or overheated media, this point is very important, if we do not pay attention to this point when using the sensor, it will affect the relevant use of the sensor.
Note 2: In ...
|
|
Introducing the MR-C series of Turck relays
MR-C series
Relays from two to four electric shocks
At the same time, it has a complete series of special industrial relays and power relays
Unique coil voltage levels - 220V DC and 400V AC
The C5 series has become an important part of the MR-C series, and the electric shock capacitance can be ...
|
|
How to use linear displacement sensors – Turck
A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function relationship through the potentiometer element. In order to achieve the intention of measuring displacement, it is necessary to have a confirmation relationship between the change in displacement and the change in resistance. Usually...
|
|
Introduction to the characteristics of thermocouples and thermistors
1. Thermocouple
Thermocouples are the most commonly used temperature sensors for temperature measurement. Its main benefits are a wide temperature scale and adaptability to a wide range of atmospheric environments, and it is robust, inexpensive, does not require electricity, and is also the cheapest. A thermocouple consists of two different metal wires connected at one end (metal A and ...
|
|
Submersible level transmitter installation steps
1. Devices in static water (deep wells, pools, liquid irrigation, etc.)
1. When measuring the stop fluid level in the open container, put the liquid level transmitter vertically into the bottom of the container, and fix the cable connecting the transmitter and the junction box at the opening of the container.
2. When the medium is viscous ...
|
|
Temperature sensors are used in a wide range of applications – Turck
Temperature sensors are widely used in various occupational fields, such as: medical occupations, heavy industry, water treatment, wind power occupations, rail transit, HVAC occupations, energy and environmental protection, food occupations, hydropower stations, petrochemical industry, metallurgical industry, printing and dyeing pharmaceutical and other occupations are used.
...
|
|
Installation and selection of high-frequency pressure sensors – Turck
1. Estrangement
Do not press or touch the barrier as this may damage or alter its calibration, especially on low pressure scale types.
2. Accessories and hardware
With the right pressure, additional fittings and hardware, make sure you have the right thread type and size. If the demand ...
|
|
Two ways of movement of displacement sensors – Turck
There are two ways to move a displacement sensor, but which two methods are there? We're going to talk about that today. Displacement is a quantity related to the movement of the position of an object in the process of motion, according to the different motion methods, the displacement sensor can be divided into linear displacement sensor and angular displacement transmission ...
|
|
Turck LUS ultrasonic level sensors
Launch of the LUS211 ultrasonic level sensor, Turck's first ultrasonic sensor with a local LED display.
The LUS211 is a programmable sensor for measuring solids and liquid levels in housings. Because...
|
|
The difference between load cells and load cells – Turck
1. Materials
Load cells require stringent parameters such as creep of the output signal, temperature drift and zero point stability, so the metal properties of the sensor elastomers such as deformation, internal stress relief, as well as zero point stability and temperature compensation on the strain gauge are more demanding. And the load cell ...
|
|
Choose the right laser displacement sensor method – Turck
1) Pay attention to the structure and data of the object to be measured, and the general laser displacement sensor needs to measure the triangular optical path with intact requirements. If the measured object has deep grooves or messy appearance, it may cause the triangular light path to be occluded, so that it cannot be measured. There are also some light-absorbing materials, such as black rubber and other materials, most of the light intensity will be ...
|
|
Load cell maintenance method – Turck
1. The load cell in a high-temperature environment will cause problems such as melting of coating materials, solder joint openings and changes in the stress structure of elastomers. Load cells operating in high-temperature environments usually use high-temperature sensors; In addition, they must be insulated, water-cooled, or air-cooled, etc.
...
|
|
Introduction to TURCK's various sensors
Inductive sensors
Inductive sensors are capable of detecting metal objects in a non-tactile and wear-free manner. To do this, they use high-frequency communication electromagnetic fields to interact with their targets. Their strengths are durability, robustness, high switching frequencies, and long service life. Cause...
|
|
How Turck's flow sensors work
In order to ensure trouble-free testing and reliable inspection results in the manufacturing industry, many processes require the same inflow and outflow of liquid or gaseous media. In the automated production process, in addition to the pressure sensor and temperature, the measurement of flow rate is also very important. Based on the continuous ...
|
|
Causes and solutions for unstable output signals of photoelectric sensors – Turck
The following conditions may cause the output signal of the photoelectric sensor to detect the object is unstable:
(1) The power supply is abnormal;
(2) The detection frequency is too fast;
(3) the size of the measured object;
(4) The measured object is not in the stable detection area of the sensor;
(5) Electrical interference.
...
|
|
Features of Turck's Turck pressure sensors:
Turck's Turck pressure sensors have outstanding machining and heat treatment capabilities and high compressive strength. Affected by the characteristics of small influence of temperature, the correct selection of elastic sensitive components and strain gauge bridges is an important way to improve the strain gauge sensor: 1. The measurement scale has high optical accuracy, and the force measurement ...
|
|
Contact
working hours
