Introduction: Xinshida/STEP universal servo drive K1AS
Features:
Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; It supports up to 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs 2, and can set the speed, acceleration, deceleration and emergency deceleration of the internal position mode;
Automatically determine the mechanical characteristics of load inertia, optimize gain, and shorten system debugging time;
Mechanical resonance frequency analysis, equipped with two sets of notch filters, which can adjust the frequency (50 - 5000Hz) and notch depth, effectively overcome the low-frequency resonance and vibration at the end of the machine, and can set the vibration frequency (1 - 100Hz) and vibration damping;
The friction torque compensation function can reduce the influence of static friction during mechanical commutation and improve the command following performance of low-speed operation.
Debugging software support, can be mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation.
Product parameters
Supply voltage: single-phase or three-phase 220VAC (-15-+10%), 50-60Hz
Output: 220V ( 0.4kW, 0.75kW, 1.5kW, 2.2kW, 3kW, 5kW), K1 series 380V (5kW, 7.5kW)
Encoders: 2500-line incremental/wire-saving encoders, 17bit/20bit/23bit absolute encoders
Digital IO signal: 4 channel input and 3 channel output can be set functionally
Analog signal: 2 inputs
COMMUNICATION: RS232, STANDARD MODBUS PROTOCOL, CANOPEN BUS
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
STEP Inverter AS720 Series 380-460VAC
Introduction: The AS720 series of STEP inverter is an airborne all-in-one product developed for the HVAC industry based on the mature hardware platform of Xinshida. The inverter is cooled by air conditioning refrigerant, with high power density, and the design process takes into account the working environment of HVAC, installation ...
|
|
The input voltage of AS-M21 is 380-440V
Introduction: AS M21 series inverter is a universal inverter designed for China's small power segment motor speed control market, with typical VF control technology, but also using no speed sensor vector control technology, the product integrates Germany technology, Chinese manufacturing technology, light and heavy load in one, ...
|
|
Xinshida/STEP Motion Controller SC30-A6H RAM capacity 2G
Introduction: Xinshida/STEP motion controller SC30-A6H, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
The AS620 series of STEP inverters is IP20 rated
Introduction: Xinshida/STEP inverter AS620 series is a special inverter specially designed for the elevator market, suitable for elevator drive occasions. The product adopts excellent motor control technology, which not only has excellent control performance, but also combines the application characteristics of Chinese elevators.
|
|
Xinshida/STEP bus type open operation control platform AMC1600E
Introduction: Xinshida/STEP bus open operation control platform is an open operation control platform launched by Xinshida AMC1600E Support IEC6113-3 programming, support 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD can be flexibly configured according to the actual situation of customers.
...
|
|
Xinshida/STEP Industrial Fan STEP-F series feels 8-10°C cooling
Introduction: Xinshida/STEP Industrial Fan STEP-F Series New energy-saving and environmentally friendly large-scale industrial fan and other energy-saving and environmentally friendly products.
Features:
Ambient cooling
Feel the temperature drop by 8-10°C
The natural wind STEP-F series ceiling fan adopts ultra-large diameter fan blades, which can be operated at low speed.
|
|
Xinshida/STEP inverter AS500 rated input current 7-1040A
Introduction: Xinshida/STEP inverter AS500 not only has typical V/F control technology, no speed sensor vector control technology, closed-loop vector control and torque control technology, but also adopts synchronous open-loop vector control technology, synchronous closed-loop vector control technology, and combines the domestic application characteristics.
|
|
Xinshida/STEP motor 80S2S rated torque 2.4N.m
Introduction: Xinshida/STEP motor 80S2S, 2500 line incremental/wire-saving encoder, optional absolute encoder;
Product parameters
Power range: 750W
Input voltage: AC - 220V
Rated torque: 2.4N.m
Encoder Type: 25 ...
|
|
STEP Pump Controller D150
Introduction: Xinshida/STEP pump controller D150
Features:
High protection level 1P54, 3C4 standard circuit board coating, suitable for high humidity and high dust environment
Comprehensive and reliable protection function, detection of motor overcurrent, water shortage of water pump, rust prevention, float abnormality, etc
...
|
|
Xinshida/STEP common DC multi-drive inverter ME700 frequency 2~5kHz
Introduction: ME700 series engineering drive is a common DC multi-drive inverter specially designed and developed for heavy-duty machinery and equipment in the rubber industry. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international reliable inverter.
|
|
Xinshida/STEP Inverter AS520 Series Torque accuracy±5%
Introduction: AS520 series products are an inverter drive unit developed for the use of common DC bus. The product adopts advanced vector control technology and torque control technology, which not only has the same excellent control performance as the international high-quality inverter, but also combines the hoisting machinery industry ...
|
|
Xinshida/STEP high-voltage inverter ME800 vibration is less than 0.5g
Introduction: ME800 series high-voltage inverter has power electronics technology and vector control technology in one of the high-high voltage source high-voltage inverter, it greatly suppresses the input harmonic current on the grid side through the phase-shifting rectifier transformer, and realizes the voltage superposition through the cascade of multi-stage H-bridge power units.
|
|
Xinshida/STEP bus motion control card ADT-6329E communication cycle 250us-4ms
Introduction: Xinshida/STEP bus motion control card ADT-6329E, supports up to 64 nodes, has the function of motion trajectory preprocessing planning, supports four groups of independent preprocessing interpolation channels, supports up to 32 axis interpolation, a variety of acceleration and deceleration control, spatial arc interpolation, logic position variable ring ...
|
|
Xinshida/STEP low-power inverter AS-M20 rated frequency 50/60Hz
Introduction: AS-M20 series inverter adopts advanced non-speed sensor vector technology, advanced motor parameter identification, online estimation technology and advanced flux estimation technology, both in the speed regulation range and in the dynamic response, control accuracy and low-frequency torque have been greatly improved.
|
|
Xinshida/STEP inverter AS510 series 30-450kW
Introduction:Xinshida/STEP inverter AS510 series adopts advanced controllable rectification technology, with LCL filter to achieve active rectification, providing constant DC power supply and energy feedback for the system, and can run 1 or more inverter units on the DC bus to form a four-quadrant operation of multi-...
|
|
Xinshida/STEP inverter AS900 series rated voltage DC540V
Introduction: Xinshida AS900 series 3-in-1 new energy vehicle auxiliary motor controller, for PHEV and EV; High power density; High overload capacity; Built-in voltage, current, temperature detection; Integrated drive protection.
Product References ...
|
|
Xinshida/STEP inverter AS560 series output voltage three-phase 460ACV
Introduction: AS560 inverter is a customized product for on-board air conditioning applications, which can be matched with AC inverter compressor and DC inverter compressor. The design of the inverter is based on an in-depth understanding of the characteristics of the industry, and the design reduces some non-essential functions in the industry, improves the compactness of the product and reduces the ...
|
|
Xinshida/STEP Motion Controller SC30-A6L RAM capacity 2G
Introduction: Xinshida/STEP motion controller SC30-A6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP low-power inverter AS610 series carrier frequency 2-10kHz
Introduction: Xinshida AS610 inverter high reliability design is a small power inverter, is specially developed for small power lifting ends, its advantages are small size, high performance, can be used for asynchronous motor and synchronous motor drive, high protection level.
...
|
|
Xinshida/STEP escalator inverter AS310 185X140x130mm
Introduction: Xinshida/STEP escalator special inverter AS310, smooth tracking start, can be smooth start of the rotating motor at any time with low impact
Features:
High-performance software features
The asynchronous motor MTPA technology is adopted to reduce the motor loss and improve the system ...
|
|
Contact
working hours
