Tianyi switch - the classification of proximity switches and their introduction

Create Date: 2024-8-30 12:03:23|Source: TIANYI/TAYEE

(1) Eddy current proximity switch

This type of switch is sometimes called an inductive proximity switch. It is the use of conductive objects when they are close to the proximity switch to produce eddy currents inside the object. This eddy current reacts to the proximity switch, causing the internal circuit parameters of the switch to change, so as to identify whether there is a conductive object moving closer, and then control the switch on or off. The object that can be detected by such a proximity switch must be a conductor of electricity.

(2) Capacitive proximity switch

The measurement of such a switch is usually one plate that makes up the capacitor, while the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards the proximity switch, regardless of whether it is a conductor or not, due to its proximity, the dielectric constant of the capacitor must change, so that the capacitance changes, so that the state of the circuit connected to the measuring head also changes, so that the switch can be switched on or off. The object of this proximity switch is not limited to conductors, but can also be insulating liquids or powders.

(3) Hall proximity switch

A Hall element is a magnetic-sensitive element. Switches made of Hall elements are called Hall switches. When a magnetic object moves close to the Hall switch, the Hall element on the detection surface of the switch changes the internal circuit state of the switch due to the Hall effect, so as to identify the presence of a magnetic object nearby, and then control the switch on or off. The object of detection of such a proximity switch must be a magnetic object.

(4) Photoelectric proximity switch

Switches made of the photoelectric effect are called photoelectric switches. The light-emitting device and the optoelectronic device are installed in the same detection head in a certain direction. When a reflective surface (the object to be detected) is approaching, the optoelectronic device receives the reflected light and outputs a signal, so that it can "sense" the approach of the object.

(5) Pyroelectric proximity switch

Switches made with components that sense temperature changes are called pyroelectric proximity switches. This type of switch is to install a pyroelectric device on the detection surface of the switch, and when an object with a different temperature from the ambient approaches, the output of the pyroelectric device changes, so that an object can be detected.

(6) Other forms of proximity switches

When the distance of the observer or system to the wave source changes, the frequency of the approaching wave shifts, a phenomenon known as the Doppler effect. Sonar and radar are made using the principle of this effect. The Doppler effect can be used to make ultrasonic proximity switches, microwave proximity switches, etc. When an object is approaching, the reflected signal received by the proximity switch generates a Doppler shift, which can identify whether an object is approaching.

Tianyi switch - the classification of proximity switches and their introduction

More on that

	Tianyi switch - what does the 2P3P of the air switch mean 2P means two poles, which means that this air switch has two connection ports, one to connect to the neutral wire and one to the live wire, which is suitable for single-phase circuit connection, or can also be used to connect two-phase power supply in a three-phase circuit. 3P is the meaning of three poles, there are three connection ports, and all of them are ...
	VTeam switch – how to operate a linear DC power supply correctly 1) Voltage Setting: Turn on the DC switch, adjust the voltage knob to adjust the voltage reading to the desired operating power connection. If you need to lower the voltage, turn the potentiometer slowly so that the drip rate of the voltmeter is compatible with the speed of the manual adjustment knob. 2) Constant Current Setting: Connect ...
	Tianyi switch - the difference between the dual power supply automatic transfer switch CB and PC grade First, the principle is different 1. Class Cb automatic switch is an electronic product that converts one or more load circuits from one power source to another 2. PC-level automatic transfer switchgear is an electrical appliance that converts one or several load circuits from one power supply to another. ...
	Tianyi switch - how to choose the right industrial switching power supply? 1. First of all, it is necessary to select the appropriate input voltage specification; 2. Choose the right power. In order to extend the service life of the power supply, it is necessary to select an additional type with 30% of the rated output power. 3. Consider the load characteristics. The load added is a motor, bulb or capacitive load, and the current at start-up ...
	Tianyi switch - how to select the switch? 1. Use less plastic switches The switch is composed of a panel, a current carrier, a nozzle and a base, etc., and a good switch is mostly made of stainless steel inlay, which is safe and anti-electric shock. On the contrary, most of the inferior switches are made of plastic, although they are insulated, they are prone to leakage and flammability, and potential safety hazards will occur. 2 ...
	Tianyi switch - what is the function of high-voltage load switch 1. It can isolate the power supply, with a significant disconnection point, and is mostly used for fixed high-voltage devices; 2. It has arc extinguishing equipment and a certain opening and closing rate, and can pass through the normal working current and the specified short-circuit circuit in the case of closing; 3. It is forbidden to connect and cut off the circuit with load, ...
	The main features of VTeam X42 series limit switches Uses: X42 series limit switches can be widely used in various types of mechanical equipment, automatic assembly lines and other light and medium load occasions, can detect the object action state, such as presence and absence, movement position, end of stroke, etc. Overview: The switch is mainly composed of switch operating parts, ...
	New product release of TPB1TPL1 button signal light TPB1 series pushbutton switch is designed by VTeam's senior R&D technical team, which is suitable for a variety of industries and various occasions. TPB1 series pushbutton switches have a complete range of colors, rich colors, economic and durable, easy installation and superior performance. Automated production, testing, and quality control are more stringent, and the products are ...
	Tianyi switch - introduction to the characteristics of high-voltage load switch 1. It can isolate the power supply, have obvious disconnection points, and is mostly used for fixed high-voltage equipment. 2. It has an arc extinguishing device and a certain opening and closing speed, and can pass the normal working current and the specified short-circuit circuit in the closing state. 3. It is strictly forbidden to turn on and off the circuit with load.
	Tianyi switch - the allowable operating range of the disconnector 1. Pull together the voltage transformer and lightning arrester under normal conditions. 2. Pull together the 220kV no-load bus. 3. The neutral point of the transformer when there is no ground fault in the latching grid. 4. Pull the bypass current that is closed by a switch or an isolated switch. 5. Outdoor vertical splitting triple isolation ...
	Tianyi switch - the difference between high-voltage load switch and high-voltage circuit breaker 1. The high-voltage load switch can be used as a load switch, which has the effect of self-extinguishing arc, but its breaking volume is very small and very limited. 2. The high-voltage isolation switch generally cannot be used as a load switch. There is no arc extinguishing cover in the structure, and there are also disconnectors that can switch loads on and off, but the structure is different from load switches ...
	VTeam switch – the working principle of linear power supply The working process of the main circuit of the linear power supply is that the input power supply is first converted into a DC power supply by the pre-regulated circuit after the initial AC voltage regulation, and then the linear adjustment element is finely adjusted under the intelligent control of the control circuit and the monolithic microprocessor controller, so that the ...
	Tianyi switch - the high and low voltage division of low voltage switch 36V is a safe voltage, but it cannot be used as a standard for dividing high and low voltages. There are two ways to divide high and low pressure: 1. According to the rated voltage: the rated voltage is 1000V and below is called low voltage; The rated voltage of 1000V or more is called high voltage. 2. According to the voltage of the equipment to the ground...
	Tianyi Switch - Cam Switch and Load Disconnector Q&A (1-10) Q1: What is the difference between P switch and T switch? A: P switch is a load isolation switch, mainly used for the opening and isolation of the main circuit load, only 3P and 3+N, can add auxiliary contacts; The T-switch is a multi-function switch with a wide variety of contact sequences, modular contact units, which can ...
	Tianyi switch - precautions for high-voltage load switch 1. For vertical installation, the switch frame, closing mechanism, cable sheath, and protective steel pipe should be reliably grounded (not connected in series). 2. Before operation, several no-load opening and closing operations should be carried out, and each rotating part should be free of jamming, closing in place, and there should be enough safety distance after opening. ...
	Overview of limit switches and their functions - Tianyi limit switches An overview of limit switches Limit switch is a kind of mechanical orientation and electronic control interface, the mechanical action into electrical signals, is suitable for industrial environment of a common electromechanical and electrical components, through the contact way to detect the object, the existence and so on. It is possible to control the device's ...
	Tianyi switch - the difference between C type and D type of air switch The meaning is different, the scope of application is different, and the role is different. Air opening C represents the current, and the D model represents the power. The scope of use is different. If it is a household electricity, the air switch of the C model is generally chosen. The role is different. Type C it is used for home lighting use, Type D is suitable for ...
	Tianyi switch - the term introduction of limit switches Pre-stroke - indicates the distance or angle at which the actuator on the limit switch must move before tripping the switch contact Operating Point - Indicates the position of the actuator when the switch contact is moved to the working position Release Point - Indicates the position of the actuator when the contact returns to its original state Differential - ...
	Tianyi switch - introduction to the types and characteristics of limit switches Conventional domestic travel switch LX19-001/111 in the LX19 series, LXK3-20S/T in the LXK3 series, JLXK1 series JLXK1-111/411/511 in the conventional travel switch are the most representative.
	Tianyi switch - the difference between disconnector and circuit breaker 1. The circuit breaker is equipped with an arc extinguishing device, so the circuit breaker can be operated with load, but it cannot operate the current of the load. The disconnector does not have an arc extinguishing device, and it can operate places where the load current is less than 5A, but it is generally not suitable for operation with load. 2. And the circuit breaker ...