1. The basic output method of torque sensor signal is: square wave signal and pulse signal.
Voltage analog signal output or current analog signal output (unidirectional, static torque measurement) can be made according to user needs.
2. Torque signal processing method: the frequency signal output by the torque sensor is sent to the frequency meter or digital meter, and the frequency signal or voltage and current signal proportional to the torque are directly read.
The torque and frequency signals of the torque sensor are sent to the secondary surface of the single-chip microcomputer, and the real-time torque value, speed and output power value and RS232 communication signal are directly displayed. The frequency signals of torque and rotational speed are sent directly to a computer or PLD for processing.
Protection & Maintenance:
1. Grease the bearings at both ends of the torque sensor every other year. When adding grease, only turn the bearing covers at both ends open, add grease to the bearings, and then install the end covers.
2. It should be stored in a dry, non-corrosive, room temperature of -20°C-70°C.
3. Torque sensor industrial device:
Torque sensor industrial devices and general use devices should pay attention to the point: first of all, the problem of the use of the environment, the industrial use of torque sensor devices in the environment temperature is relatively high, and the relative humidity is better than 90%, no flammable, explosive environment. The shielding of the magnetic field is also very important in the industrial torque sensor, and the general torque sensor should not be installed in the environment of strong electromagnetic interference.
The second is the device method, which is also a horizontal device and a straight device. The connection between the torque sensor and the power equipment and load equipment is also appropriate, and the demand should be very stable in the application of industrialization. The elastic pin coupling should not be used in industrial applications, because it is simple in structure, easy to process, and convenient in protection, it is generally suitable for medium load, high and low speed working occasions with frequent starting, and the working temperature is -20-70 °C.
Notes:
1. When the device is installed, it cannot be operated with electricity, and the sensor must not be directly hit or bumped.
2. The fastening bolts of the coupling should be tightened, and the outside of the coupling should be covered with a protective cover to avoid personal injury.
3. The output of the signal line shall not be to the ground, short circuit to the power supply, and the output current shall not be greater than 10mA? It is necessary that the shield of the shielded cable is connected to the common end of the +15V power supply (power ground).
|
More on that
|
Wireless HART technology for industrial processes
WirelessHART uses the 2.4 GHz band (which is no-nonsense and globally) as a transmission medium for a variety of radio skills, including WLAN, Bluetooth, and ZigBee. However, WirelessHART is more than just a variant of WLAN.
...
|
|
Advantages of HiC2441
Technological advantages
The HiC2441 can adapt to any signal type without the need for complex configuration configurations, and users can complete loop commissioning very simply, quickly and reliably.
The HiC2441 is a universal barrier that can be adapted to any common signal type. Meantime...
|
|
The application of P+F sensors
Positioning, Navigation, Sorting...... The completion of various functions of mobile robots can be said to be inseparable from the role of sensors, and with the continuous expansion of the scope of use of mobile robots, the environment they face is more complex and diverse, and the requirements for sensors are also constantly improving.
...
|
|
Introducing encoders
The rotary encoder is an opto-mechatronic speed-displacement sensor. When the encoder shaft rotates and the grating disc rotates, the light cut out of the slit of the grating disc is received by the receiving element and an initial signal is generated. Germany is a well-known brand. The signal is reacted to by a follow-up circuit ...
|
|
Sensor selection
The company is a company focusing on the development of mechanical motion control and sensing skills, and its products have the characteristics of high reliability, high accuracy and high protection, and play an irreplaceable role in the process of industrial production and mechanical manufacturing.
...
|
|
Introduction and installation matters of the safety barrier
The safety barrier, also known as the safety factor meter, is an important part of the intrinsic safety system.
There are two main types of barriers: P+F Zener barriers and P+f isolated barriers. The core elements of a double Forgina barrier are a diode, a current-limiting resistor and a fast fuse.
...
|
|
Applications for capacitive sensors – we are blessed
Capacitive sensors have the advantages of simple structure, high temperature resistance, radiation resistance, high resolution, and good dynamic response characteristics, and are widely used in the measurement of pressure, displacement, acceleration, thickness, vibration, liquid level, etc. However, it is necessary to pay attention to the following aspects in the application of the influence on the measurement results:
...
|
|
How to identify the number of pulse positions in an encoder – we are blessed
The pulse encoder is a rotary encoder that uses the rotation pulse for signal output, and the main characteristics are the standard shape and diversified shape structure; The internal coding is stable, the signal output qiang, and the pulse value and positioning value are clear. Therefore, when choosing this type of punching encoder, ...
|
|
A little bit about photoelectric sensors – a blessing
Under normal circumstances, a photoelectric sensor consists of two parts: a processing path and a processing element. Its basic principle is to use the photoelectric effect to convert the measured change into a change in the optical signal, and then use the optoelectronic components to further convert the non-electrical signal into an electrical signal. The "photoelectric effect" refers to the use of light ...
|
|
The photoelectric switches are simply classified
An important function of the photoelectric switch is to be able to handle changes in the intensity of light: the light beam is changed by using optical components in the transmission medium; Use a beam of light to reflect objects; Instantaneously returns the light emitted by the beam over a long distance.
The photoelectric switch (photoelectric sensor) is a photoelectric proximity on...
|
|
Auxiliary mechanical device installation form - double blessing
Auxiliary mechanical devices: commonly used are rack and pinion, chain belt, friction runner, rope reeling machinery, etc.
Low-speed end device: installed behind the reduction gear, such as the shaft end of the winch wire rope drum or the shaft end of the next reduction gear ...
|
|
Engineered Vibration Sensor Test Methods – Blessing
In the field of engineering oscillation testing, there are various test methods and methods, but they can be divided into three categories according to the measurement methods of various parameters and the physical properties of the measurement process.
1. Mechanical quizzes
Will the works oscillate ...
|
|
Pressure control of servo presses – we are blessed
The servo press drives the fine ball shaft through the synchronous belt to complete the accurate orientation control of the pressure spindle, and the high-sensitivity pressure sensor equipment is at the front end of the pressure spindle, which can detect the load of the pressure spindle in real time. Real-time collection of orientation and load data to complete the fine ...
|
|
Precautions for the installation of linear displacement sensors – we are blessed
1. The linear displacement sensor should be used to prevent over-travel in the application, and a certain margin should be left in the selection to facilitate the use of the device.
2. The linear displacement sensor device is fixed by a bracket, and then the follow-up shaft is connected to the moving object to be measured. When the sensor is fixed in the device, it can be ...
|
|
Illustrate the dynamic characteristics and linearity of our sensors
The dynamic characteristics of a sensor refer to the characteristics of the output of the sensor when the input changes. In practice, the dynamic characteristics of the sensor are often indicated by its echo to some normative input signals, because the echo of the sensor to the normative input signal is easy to obtain by experimental methods, ...
|
|
The sensitive core structure of the accelerometer – we are blessed
The accelerometer is a sensor that can measure acceleration, this sensor can help the product to understand the environment in time, and it is very accurate, so what is the structure of its sensitive core?
1. Compression method: ...
|
|
Application features of rotary incremental encoders
The rotary incremental encoder outputs pulses when it rotates, knows its orientation by the counting device, and remembers the orientation by relying on the internal memory of the counting device when the encoder does not move or the power goes out. In this way, when the power goes out, the encoder can not have any movement, and when the call is working, the encoder ...
|
|
Ultrasonic level gauge installation principle
1. The interval from the launch surface of the probe to the liquid level should be smaller than the range of the purchased surface.
2. The interval between the launch surface of the probe and the highest liquid level should be greater than the blind area of the purchased surface.
3. The launch surface of the probe should be parallel to the surface of the liquid.
...
|
|
Selection criteria for proximity switches
1. The output working voltage of the proximity switch is selected, usually DC type DC24V or AC AC250V optional;
2. Proximity switch output mode selection, usually NPN-normally open, NPN-normally closed, PNP-normally open, PNP-normally closed, 2-wire normally open, 2-wire normally closed, DC 3-wire, DC 4-wire ...
|
|
The difference between a force transducer and a load cell – we are blessed
A device that converts the value of a force transducer into an associated electrical signal. Force is the direct cause of changes in the motion of materials. Force sensors can detect tension, tension, pressure, components, torque, internal stresses, and strains. The specific equipment is metal strain gauges, pressure sensors, etc., which have become electric ...
|
|
Contact
working hours
