CHINT/CHINT LAY3 series buttons

Introduction: NVF3G-LS series special inverter for wire drawing is a cost-effective special inverter for the wire drawing and winding industry. NVF3G-LS series integrates winding control function, supports winding diameter calculation, tension PID control and wire break detection function, etc., so that the mechanical and electrical control system ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NBH-40 miniature circuit breaker is mainly used for overload and short circuit protection of power lines in household and similar places with AC 50Hz, rated voltage to 230V and rated current to 40A, and can also be used for infrequent switching of electrical devices and power lines under normal circumstances. Products...

NB1G-63 miniature circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage 230V, rated current to 63A in the line, the line plays the role of overload short circuit and overvoltage protection, can also be used as the line infrequent operation conversion. Standards: GB ...

JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article describes ...

HZ5 series combination switch is mainly used for AC 50Hz or 60Hz, voltage 380V and below electrical circuits as power switch and cage induction motor starting, commutation, variable speed switch, can also be used for control line switching. Comply with standards: GB/T 14048.3, IEC 60947-3. ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

The XF9 auxiliary contact is suitable for the line with the agreed heating current to 6A, the AC rated voltage to 415V or the DC rated voltage to 130V, and it is assembled with NB1 or NBH8 miniature circuit breaker for the signal indication of the long-distance circuit breaker. Standards: GB/T 14048.5, IEC 6094 ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

Introduction: NVF3M series mini inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, overload capacity...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

LAY39 series button is suitable for AC 50Hz or 60Hz, rated working voltage 380V and below or DC working voltage 220V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal ...

NCH8G series household AC contactors (hereinafter referred to as contactors) are mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance loads; It can also be used to control the home ...

NA1-10 million universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage AC400V, AC690V, rated working current to 1000A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single ...

NXBF-63 miniature circuit breaker is mainly used for overload and short circuit protection of power lines in household and similar places with AC 50Hz, rated voltage to 230/400V and rated current to 63A, and can also be used to turn on and off electrical devices and power lines infrequently under normal circumstances. ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NB8LE-63M residual current action circuit breaker is mainly suitable for AC 50Hz, rated voltage of 230V, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection and leakage protection for the line, but also under normal circumstances...

NB8LE-40 residual current action circuit breaker is mainly suitable for AC 50Hz, rated voltage to 230V, rated current to 40A in commercial office buildings, civil residential and general industrial terminal distribution lines, to provide overload, short circuit protection and leakage protection for the line, but also in normal conditions ...