CHINT/CHINT CKJ5 Series Vacuum AC Contactor CKJ5-250

Introduction: GP-UPS series online uninterruptible power supply is an online UPS model with power frequency three in and three out or three in and out of line. This series of UPS adopts the high-frequency double-conversion structure of output isolation transformer and advanced all-digital control technology to achieve stable, clean and uninterruptible power supply output. At the same time ...

CHINT Xinrui NA5 series universal circuit breaker has a rated working current from 200A to 6300A, a rated limit short-circuit breaking capacity of up to 120kA, a rated working voltage of up to AC690V, and an ambient temperature of -45°C - +70°C. The product set high breaking, zero arcing, a variety of ...

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

Introduction: NXZB/NXZHB series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 63A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the load circuit ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 2 Digital inputs: 16 Degree of protection: IP30 This article introduces CHINT/CHINT NSC1 series motion controller NSC1- ...

Introduction: CHINT/CHINT AC contactor CJX1-9 is mainly used for AC 50Hz or 60Hz, the rated insulation voltage is 660V-1000V, and the rated working current is 9A-475A when the rated working voltage is 380V under the AC-3 use category, and is suitable for controlling AC electric ...

DW17D series universal circuit breaker is suitable for AC voltage 400V (380V), 690V (660V), 50Hz, rated working current to 3900A power distribution network, used to distribute power and protect lines and power equipment from overload, undervoltage, short circuit and other hazards, under normal conditions, can also be used as ...

The NC5 series AC contactors are primarily used at AC 50Hz (or 60Hz) and are rated for operating voltage up to 690V at AC-3/400(380)V Circuits rated up to 630A in the use category for long-distance switching on and off circuits, and with appropriate thermal overload relays...

Introduction: NZ7 series automatic transfer switch electrical appliances are suitable for AC power frequency 50Hz, rated working voltage AC400V, rated working current to 800A in the three-phase four-wire dual-circuit power supply network, automatically connect one or several load circuits from one power supply to another, in order to ensure that the load circuit is positive...

Introduction: NVF3G-LS series special inverter for wire drawing is a cost-effective special inverter for the wire drawing and winding industry. NVF3G-LS series integrates winding control function, supports winding diameter calculation, tension PID control and wire break detection function, etc., so that the mechanical and electrical control system ...

This product is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. Conform to the standard: GB/T 16917.1 IEC 61009-1, obtained CCC certification...

Introduction: NXZ series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the normal supply of load circuits.

NU6-III series surge protector (hereinafter referred to as surge protector) is used in AC 50Hz, rated working voltage 230V single-phase power distribution system, to meet the SPDIII. test, its open circuit voltage peak to 10kV (1.2/50μs), short circuit current to 5kA (8/20μs), suppress ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

●The new NXC series AC contactor has a novel appearance and compact structure. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 60 ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays. ●Conform to the standard: GB/T 14048.1/IEC 6094 ...