CHINT/CHINT NB1G-63 miniature circuit breaker

NBHLU-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V power distribution and control system, rated current to 63A in the line to play leakage, overload and short circuit protection, at the same time, this series of products have the corresponding function of surge protector. The product conforms to GB/T 16917 ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

Introduction: GP-UPS series online uninterruptible power supply is an online UPS model with power frequency three in and three out or three in and out of line. This series of UPS adopts the high-frequency double-conversion structure of output isolation transformer and advanced all-digital control technology to achieve stable, clean and uninterruptible power supply output. At the same time ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

Introduction: NVF5-GS series water supply inverter is a small size, cost-effective water supply inverter tailored by CHINT for the water supply industry. The product supports fixed inverter mode, cyclic inverter mode, soft stop and emergency stop function, overpressure protection function, sleep function, rest ...

Introduction: CHINT/CHINT AC contactor CJX1-9 is mainly used for AC 50Hz or 60Hz, the rated insulation voltage is 660V-1000V, and the rated working current is 9A-475A when the rated working voltage is 380V under the AC-3 use category, and is suitable for controlling AC electric ...

NB1LE-40□ residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be ...

The NF1 load switch is suitable for electrical circuits with AC 50Hz or 60Hz and voltage 690V and below. It is widely used in power distribution systems and automation systems in construction, electric power, petrochemical and other industries. It is mainly used for the main switch of machine tools, fans and pumps, and can also be used as a small-capacity motor ...

DTSY666 type three-phase four-wire electronic prepaid electric energy meter (hereinafter referred to as electric energy meter) can realize the functions of electric energy metering, electricity pre-purchase, * large load limit, etc., the product is the ideal electric energy metering product for electricity charging reform, improve the level of scientific management of power supply, and promote electricity consumption. Features ...

OUVT-X1H over-voltage and under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the terminal voltage of the tripper is reduced to the undervoltage protection range or increased to the overvoltage protection range, the tripper acts and drives the circuit breaker to automatically ...

DZ47-60 miniature circuit breaker is mainly used for overload and short-circuit protection in the line of AC 50Hz, rated voltage to 400V and rated current to 63A, and can also be used to turn on and off electrical devices and lighting circuits infrequently under normal circumstances, but it is not suitable for protecting motors. Comply with the standard ...

NA1 series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage to AC690V, rated working current to 6300A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding, etc.

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NXBFLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on and off under normal circumstances. The product conforms to IEC61009-1, GB/T...

Introduction: NKZ1-20 series universal transfer switch can be used in AC 50Hz or 60Hz, voltage 415V and below, DC voltage 220V and below in the circuit for the conversion of electrical control circuits and electrical measuring instruments, such as: electromagnetic coils, electrical measuring instruments, capacitor cabinets, etc., can also be used for ...

Rated Operating Voltage (Ue) : AC 230V , 50Hz; Rated insulation voltage (Ui): 500V; Undervoltage action setting value: (35%-70%) Ue; Action characteristics: the external voltage ≤35%Ue, and the product should prevent the circuit breaker from closing; 35%Ue≤ external voltage ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.