CHINT/CHINT Terminal Block-JXB Series

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

Rated insulation voltage (Ui): 500V; Rated operating current at different rated operating voltages (see Table 1) Usage Category: AC-12, DC-12. Action characteristics: At 70%-10% of the rated control power supply voltage, the tripper should act reliably to disconnect the circuit breaker. Tripper ...

NX30 series open/concealed distribution box (box) (hereinafter referred to as the box) is a device suitable for installing 9mm modulus terminal electrical components, it has the characteristics of using electrical size modularization, installation rail, artistic appearance, safety of use, etc., it is suitable for AC 50 ...

NBHLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T...

The circuit breaker is rated for insulation voltage to 800V (500V for NM1-63 type), suitable for AC 50Hz, rated working voltage to 690V (400V for NM1-63 type), rated working current from 10A to 1250A in the distribution network circuit, used to distribute electrical energy and protect the line and power supply equipment from overload...

ND9 signal light is suitable for AC 50Hz/60Hz, rated voltage up to 230V, DC voltage up to 230V circuit control system. It is used as an indication signal, preset signal, accident signal and other indication of telecommunications, electrical and other lines. Standards: GB/T 14048.5, IEC 60947-5-1 ...

NB1L-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 63A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in the pole ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

UVT-X3H under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker is used together, when the terminal voltage of the tripper is reduced to the under-voltage protection range, the tripper acts and drives the circuit breaker to automatically break, so as to realize the under-voltage protection of the line. ...

Introduction: CHINT/CHINT miniature circuit breaker NB8-63 miniature circuit breaker is mainly suitable for AC 50Hz, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection for the line, but also under normal circumstances...

NA1 series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage to AC690V, rated working current to 6300A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding, etc.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

NPM8 series push buttons are suitable for industrial control, instrumentation, and household appliances with AC 50Hz (60Hz), rated working voltage AC220V and below, or DC working voltage DC110V and below. It is used for the control of electrical circuits of contactors, relays and other signals, with an indication ...

CHINT Xinrui NM5 series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current from 16A to 1000A circuits. As the rated current of on, breaking and bearing, it can be overloaded, short-circuited and under-voltage in the line and electrical equipment.

Introduction: NSC1 series motion controller has 2 communication ports, 1 RS232, 1 RS485; Two or four single-phase high-speed pulse counting, up to 200KHz respectively, one or two AB phase high-speed pulse counting, up to 200KHz; External real-time clock chip is used to make the clock more accurate; ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.