Shanghai, China, July 7, 2022 – Measuring body temperature is an indispensable tool under the normalization of epidemic prevention and control. For hospitals and other places with a high concentration of people, how to improve the efficiency of temperature measurement, so as to do a better job in epidemic prevention in a more targeted manner, is a problem that must be solved.
Innovative features to optimize the clinical experience
In the past, mercury thermometers used to be the main force of home temperature measurement and an essential medical device in hospitals, but in recent years, due to the potential safety hazards of mercury poisoning, coupled with environmental protection and other factors, they have been gradually replaced by electronic thermometers in daily use. According to the data, the market size of China's electronic thermometer industry in 2016 was 1.543 billion yuan, an increase of 15.86% over the same period in 2015, and it is expected that the market size of China's electronic thermometer industry will be about 2.9 billion yuan in 2022. In the face of a large number of temperature measurement people, the convenience advantage of electronic thermometer in saving time and effort is further highlighted, and it is no different from mercury thermometer in clinical use, which can meet daily and clinical needs.
The MC-685-HP is a predictive electronic thermometer for medical treatment under Omron Healthcare (China) Co., Ltd. (hereinafter referred to as "Omron Healthcare"), which uses high-precision sensors and body temperature measurement algorithms based on the brand's decades of experience to achieve fast and accurate measurements in both hardware and software. At the same time, this medical predictive electronic thermometer has been efficiently applied to many cabins in Shanghai in the past three months, which has greatly helped doctors improve the efficiency of diagnosis and treatment.
"This medical predictive electronic thermometer can predict the body temperature after about 10 minutes in just 20 seconds, and the error is controlled at ±0.1°C, which is conducive to improving the efficiency of clinical diagnosis and treatment in hospitals and enabling patients to have a good temperature measurement experience," said Kazuhiro Tsuchikura, executive deputy general manager of Omron Healthcare (China) Co., Ltd. In addition, it adopts a waterproof design of the whole fuselage, which can be wiped and disinfected with alcohol, or soaked in disinfectant solution as a whole for disinfection, which is more in line with the epidemic prevention requirements of strict disinfection. ”
Omron Medical Predictive Electronic Thermometer MC-685-HP
Deploy green medical care and accelerate the process of mercury-free
In fact, the withdrawal of mercury thermometers from the market is an inevitable consequence of the global mercury ban. As early as 2013, China signed the Minamata Convention on Mercury, which aims to prevent mercury pollution and spread; At the same time, China will also ban the production of mercury-containing thermometers and blood pressure monitors from January 1, 2026.
Medical treatment is mercury-free, which not only improves the hospital environment, but also protects the physical and mental health of medical staff and patients. As an advocate and practitioner of green healthcare, accelerating the process of mercury-free has always been the focus of Omron Healthcare's efforts:
"2013 Mercury-free Medical Devices" Media Conference: Co-hosted a media conference with Outpatient magazine, and had a dialogue with experts on the clinical popularization of medical electronic products, providing suggestions and suggestions for promoting the process of mercury-free medical care in China. "Green Healthcare for Tomorrow" – Report on the Movement of Zero Water Bank in Medical Electronics: Jointly released with the China Health Promotion Foundation, it aims to further advocate the creation of a green and healthy medical environment. "95 Charity Week Activities": Jointly launched public welfare activities with Alibaba, with the vision of green healthcare, hoping to achieve the era of "zero mercury" in China and even the world.
The electronic thermometer that cuts off the "mercury hazard" from the source is another booster for Omron Health Care to promote the mercury-free medical treatment. On the one hand, Omron Healthcare's innovative medical electronic thermometer can help hospitals to "de-mercury" upgrade medical equipment, and on the other hand, it will further promote the clinical accuracy verification of predictive electronic thermometers and escort the safety of patients.
"Omron Health Care has always adhered to the spirit of craftsmanship and has been continuously improving its research on body temperature management. Omron Healthcare's electronic thermometer not only creates a green environment, but also makes it safe and easy for each measurer to measure their temperature. In the future, Omron Healthcare will continue to strengthen product research and development, work with medical institutions to promote the process of mercury-free medical treatment in China, and strive for consumers to use medical devices more safely. ”
|
More on that
|
G7 Coffee and Omron Health Medical delivered health energy packs to help medical staff
"It's really nice to receive such an exclusive gift during the pandemic."
"I feel that my efforts have been recognized, thank you!"
"I've been running around for the health of others, but I didn't expect that some people are silently concerned about our health."
This...
|
|
The disassembly sequence and method of Omron PLC equipment
(1) Shutdown for maintenance, more than two people must supervise the operation;
(2) Change the mode selector switch on the front panel of the CPU from "Run" to "Stop" position;
(3) Turn off the main power supply of PLC power supply, and then turn off other power supplies to the mold saka;
（4） ...
|
|
Maintenance method of Omron PLC
1. Maintenance procedures, regular testing and adjustment of equipment
(1) Check the connection of the terminal blocks in the PLC cabinet every six months or quarters, and reconnect the loose places in time if they are found;
(2) Re-measure the working voltage of the power supply to the main engine in the cabinet every month ...
|
|
Omron's non-contact temperature sensors bring convenience to work and life
In recent years, Omron has launched MEMS non-contact temperature sensors, and the technology incorporated into them has gradually presented the future of smart life in front of our eyes. Next, let's learn more about Omron's MEMS contactless sensor, and deeply feel the future of work and life.
|
|
Common problems and solutions in the maintenance process of Omron PLC
1. CPU abnormality:
When the CPU is abnormally alarmed, check all the devices connected to the internal bus of the CPU unit. The specific method is to replace the units that may have problems in turn, find out the problem units, and deal with them accordingly
2. Memory abnormality:
Memory anomaly ...
|
|
What are the common faults of Omron PLC?
1. CPU abnormality: When the CPU abnormality alarms, check the devices connected to the internal bus of the CPU unit. The specific method is to replace the units that may cause failures in turn, find out the faulty units, and deal with them accordingly.
2. Memory abnormality: When the memory is abnormal alarm, if it is a program ...
|
|
Powerful use of Omron color sensor-B5WC in industrial automation
With the rapid development of modern industrial production, automation has become an inevitable development trend, in the past production process, the human eye recognition color is not only too slow, but also requires high time cost and labor cost, has been unable to meet the needs of automated industrial production, so more and more ...
|
|
Common fault problems of Omron relays
1. Do not exceed the rated voltage of load current during the use of OMRON relay, because when the applied rated voltage is too large, it may cause a local short circuit between the cores of the OMRON relay coil and poor operation of the AC operation relay. And it may also cause a succession ...
|
|
What are the advantages of Omron MOS FET relays?
1. The relay is small and still weldable.
The relays in SSOP/USOP packages feature directly exposed terminals for excellent visibility and easy installation.
2. Ultra-small and lightweight: In addition to SSOP and USOP, ultra-small packages contribute to the miniaturization of devices.
...
|
|
The solution to the Omron blood pressure monitor E3 failure
The E3 fault code usually appears on the display of the blood pressure monitor and indicates that the cuff is too tight or too loose. This failure can lead to inaccurate measurement results or even inability to complete the measurement.
Solution(s):
1. Adjust the tightness of the cuff to make sure the cuff is neither too tight nor too loose.
2. Check the sleeve ...
|
|
The solution to the problem of Omron switches only turning on the green light
For the problem that the Omron photoelectric switch only lights green, it may be because a component on the circuit board is faulty or damaged, or because of the poor connection of a component on the circuit board.
So, to deal with this, the first thing to do is to see if the components on the board are ...
|
|
【Omron industry case】Predictive maintenance of smoke machine in automobile welding workshop
Process introduction
Automobile welding is the second of the four major processes in vehicle production, which mainly assembles stamped body components into a complete body. In the welding process, spot welding and arc welding of robots are the mainstay, and there will be a station for visual inspection of the welding status in the middle.
Make...
|
|
The main features of Omron PLC:
(1) Flexible structure
Regardless of the environmental limitations, the network can be built when there is electricity, and the number of access ports can be flexibly expanded, so that the resource utilization rate is high, and it is comparable to WLAN in terms of mobility.
(2) High transmission quality, fast speed and stable bandwidth
Can be very ...
|
|
The application of Omron temperature uniformity technology in SEMI homogenizing developer
Process introduction
The gluing developer is a very important equipment for the lithography process section of chip making, which is used to realize the ultra-thin film of photoresist. It is divided into two steps: 1. Gluing process: the photoresist is dropped onto the surface of the wafer through the glue head, and the vacuum suction cup sucks the wafer and rotates at high speed for homogenization.
|
|
Omron PLC cannot connect to the computer
Method: If the computer has a 9-pin serial port, then you can make a wire. The wiring is as follows: computer PLC2 --------- 23 --------- 3 5 --------- 9 If you don't have it, you need a USB to serial port cable (you need to install a driver), and you can connect to PLC through the above wire ...
|
|
Precautions for the use of Omron relays
1. Installation orientation
Proper installation orientation is critical to maintaining the best characteristics of the relay.
· The installation orientation of the impact resistance idealization is to make the contact point and the moving member (part of the armature) in the fitness movement orientation and the vibration or impact orientation upright, very normally open contact in the electric ...
|
|
The Omron and BYD technical exchange meeting was held to explore the new future of intelligent automobile manufacturing
Recently, Omron Automation (China) Co., Ltd. (hereinafter referred to as "Omron") and BYD Co., Ltd. (hereinafter referred to as "BYD") successfully held a technical exchange meeting in Shenzhen. Omron industry and technical experts, BYD automobile, light rail, new energy, electronics ...
|
|
What are the mounting methods of Omron sensors?
The sensor can be fixed in two ways: PCB and disc mounting
1. PCB installation method
In general, the primary measurement signal of the PCB-mounted sensor is relatively small. The output terminal of the sensor adopts the way of pi pin or SMD, which can be performed according to the welding process of the general device in soldering.
|
|
【Omron Industry Case】Application case of robot in cell stack welding
Equipment Overview
The stack welding machine is mainly used for the overlap welding of monocrystalline and polycrystalline cells in fully automatic crystalline silicon solar cell modules, and is suitable for series welding of small-size crystalline silicon solar cells.
|
|
Routine maintenance methods of Omron relays
1. In the operation of Omron relay, if there is an abnormal sound or other abnormal conditions, the operation should be terminated first, and the skilled and professional repair staff should be notified to repair, and the operation can be resumed after the common fault is cleared.
2. In the whole process of maintenance, check the spring ...
|
|
Contact
working hours
