(1) Flexible structure
Regardless of the environmental limitations, the network can be built when there is electricity, and the number of access ports can be flexibly expanded, so that the resource utilization rate is high, and it is comparable to WLAN in terms of mobility.
(2) High transmission quality, fast speed and stable bandwidth
You can watch DVD movies smoothly online, and the 14Mbps bandwidth it provides is guaranteed for many application platforms. The latest powerline standard, HomePlug AV, has reached 200Mbps transmission speeds; To ensure QoS, HomePlug AV uses a combination of Time Division Multiple Access (TDMA) and Carrier Listen Multiple Access (CSMA) protocols with collision detection to deliver streaming media well.
(3) Wide range
The ubiquitous network of power lines is also an advantage of this technology. Although the wireless network can not break the wall, for high-rise buildings, it is necessary to deploy more than N APs to meet the requirements, and the existence of signal blind spots cannot be avoided. The power line is the most basic network, and its scale is unmatched by any other network. As a result, operators can easily penetrate this network access service wherever there are power lines. Once this technology fully enters the commercialization stage, it will bring great development space to the popularization of the Internet. The end user only needs to plug in the power modem, and it can realize Internet access, TV channel reception programs, phone calls or video phones.
(4) Low cost
Leverage the existing low-voltage distribution network infrastructure without any cabling and save resources. There is no need to dig trenches and holes through walls, which avoids damage to buildings, utilities, and home decoration, and also saves manpower. Compared with traditional networking technology, PLC has lower cost, shorter construction period, and stronger scalability and manageability. At present, the monthly usage fee of the places that have opened the electricity broadband Internet access in China is generally about 50-80 yuan/month, which is the same as the ADSL monthly subscription in many places.
(5) Wide range of applications
As an access technology that uses power line networking, PLC provides the "last mile" solution of broadband network, which is widely used in residential areas, hotels, office areas, monitoring and security and other fields. It is the use of power lines as a communication carrier, so that PLC has great convenience, as long as there is a power socket in any place in the room, without dialing, you can immediately enjoy 4.5-45Mbps high-speed network access, to browse the web, make calls, and watch online movies, so as to achieve a set of data, voice, video, and electricity in one of the "four networks in one".
PLC Development Trends PLC is an electronic device specially designed for digital operation in industrial environments. It uses programmable memory to store instructions for performing operations such as logical operations, sequential operations, timing, counting and arithmetic operations, and can control various types of machinery or production processes through digital or analog inputs and outputs. PLC has been widely used in steel, petroleum, chemical, electric power, building materials, machinery manufacturing, automobiles, textile, transportation, environmental protection and culture and entertainment and other industries, it has high reliability, strong anti-interference ability, powerful, flexible, easy to learn and use, small size, light weight, cheap characteristics.
|
More on that
|
Analysis of common Omron fault codes
1. C200H series PLC fault codes:
- E0001: Undefined program error
- E0002: Undefined instruction error
- E0003: Missing Program Error
- E0004: Data error
- E0005: Pointer error
- E0006: ...
|
|
G7 Coffee and Omron Health Medical delivered health energy packs to help medical staff
"It's really nice to receive such an exclusive gift during the pandemic."
"I feel that my efforts have been recognized, thank you!"
"I've been running around for the health of others, but I didn't expect that some people are silently concerned about our health."
This...
|
|
How are Omron switch relays wired?
One. Before connecting, determine the voltage required for the proximity switch, and in the case of a 3-wire system, determine whether it is PP type or P type. The proximity switch is divided into 2-wire, 3-wire and 4-wire systems.
Two. Wire proximity switches are connected in series when connected to relays. i.e. the relay is connected to the proximity switch to give it ...
|
|
Omron Releases G7L-X PCB Power Relays with Higher Performance and Reliability
With the acceleration of global decarbonization, sustainable energy is increasingly becoming the focus of attention. At the same time, the sharp rise in global energy prices has further promoted the rapid growth of the residential photovoltaic market, and the market has begun to pay attention to the huge potential of photovoltaic power supply systems.
|
|
Introduction to Omron electronic thermometer and how to use it
Using an Omron electronic thermometer, which is displayed digitally and compared with a conventional thermometer, there is a small chance of error, generally no more than 0.1 degrees, so there is little need to worry about inaccuracies. Every time you use it, it's also very simple, just press the power switch ...
|
|
Troubleshooting of Omron PLC
1. Check the switches in the battery or sensor area as well as in the problem area. Such as tool changers, tool changers and pallet changers. Look for potential alternatives or tools that may be defective through electronic prints.
2. Test the Omron PLC or internal control diagnosis of each output LED. Manual...
|
|
Introduction to the classification of Omron relay switch contacts
1.A contacts
A contact is a contact in which the two contact terminals are separated (OFF) when the switch is not operated, and closed (ON) when the switch is operated. If you want to start the load by operating the switch, you can use the A contact. A circuit is a circuit that uses a contact without operating the switch (pressing ...
|
|
The Omron CK3M/CK5M series has four major features to solve the problem of motion control
How can ultra-precision operations be realized in semiconductor and FPD manufacturing/inspection equipment, such as exposure machines, coating machines, dispensing machines, and wafer inspection equipment?
How to control special mechanical mechanisms, such as those with robotic mechanisms, in the manufacture of smart devices?
Machining Machine/Stamping Machine ...
|
|
The application of Omron in laser welding of the top cover of automotive power battery
Process introduction
The assembly process of automobile power battery and cell section is divided into:
1.Hot pressing 2.Tab welding 3.Adapter welding 4.Coating 5.Into the shell 6.Top cover welding
Among them, top cover welding is the last process, which uses the laser welding process to combine the top cover with ...
|
|
【Omron industry case】Application of high-end pouch battery welding machine
Process introduction
In the middle process of the secondary battery, the battery welding machine first needs to quickly heat press the battery cells after winding/lamination to achieve cell compaction, and then ultrasonic welding of the positive and negative tabs of the battery cells.
problem
1. Pressure fluctuates greatly, causing ...
|
|
How does Omron PLC input the rising/falling edge?
The first
1. First of all, we open the CX-P software, set the PLC model, enter the programming section, and prepare for programming.
2. Usually when we program, we are used to entering LD instruction programming, when we need to input the rising edge, we need to enter @LD0.00, you can.
3. Down...
|
|
How to add SMC module to Omron plc
After adding the I/O module, you need to set it in the CX-PROGRAMMER program.
Find the IO table and unit settings, double-click to find the mainframe [0000], dot + sign, and then double-click 00 (if not set), 00 represents the module number closest to the CPU.
|
|
The technical cooperation exchange between Omron and Sanhua was held in Hangzhou
Recently, Omron Automation (China) Co., Ltd. (hereinafter referred to as "Omron") and Sanhua Holding Group Co., Ltd. (hereinafter referred to as "Sanhua") held a technical cooperation exchange meeting in Hangzhou. Nearly 100 senior leaders and technical experts from Omron, Sanhua and its subsidiaries attended the meeting.
...
|
|
Omron Switches – What Aspects Are Needed for Switching Power Supply Design?
1. Wiring
The design requirements of wiring are very strict in the design of switching power supplies, and they must be done well to pass the test. If the designer does not handle the wiring work in the early stage of design, there will be great safety hazards in the future electricity consumption. So here I recommend you to buy a switching electric ...
|
|
FAQs on Omron PLC
1.How to install the USB driver of CP1H?
The computer is connected to CP1H (powered on) through a USB cable, and the PC will automatically prompt to find the new hardware and prompt to install the driver.
2.The built-in USB port of CP1H can be used ...
|
|
Common problems and solutions of Omron PLC
1. Omron PLC cannot be connected to the computer
There are two reasons why the PLC and the computer cannot be connected: hardware and software.
The hardware reasons are: the interface type does not match (such as USB, RS232, RS422, RS485, CAN, etc., both sides should be the same.) If you want to use the corresponding converter if you want to), ...
|
|
Common fault problems of Omron relays
1. Do not exceed the rated voltage of load current during the use of OMRON relay, because when the applied rated voltage is too large, it may cause a local short circuit between the cores of the OMRON relay coil and poor operation of the AC operation relay. And it may also cause a succession ...
|
|
Omron household oxygen concentrator failure and maintenance method
1/4 of the machine is not running, but the power indicator is on:
Reason: The compressor is overheated, so that the compressor turns on the overheating protection and stops automatically.
Exclusion method: If the machine runs for a long time without stopping, suddenly stops one day, and can run again after the machine is turned off and cooled, this is ...
|
|
How can Omron micro switches meet the market demand for smart locks?
Nowadays, the smart lock market has a wide variety of names, and it can't help but give people a sense of "random flowers gradually charming eyes". So, how to choose a cost-effective smart lock? In fact, in smart locks, micro switches can be said to occupy an important position. Microswitches ...
|
|
What are some common troubleshooting methods for Omron?
(1) Failure of peripheral circuit components
This kind of failure is more common in PLC maintenance, and it is generally a frequent occurrence in failures after a certain period of work. In the PLC control loop, if there is a component damage fault, the PLC control system will immediately and automatically stop working. The input circuit is P...
|
|