CHINT/CHINT NM1B series plastic shell circuit breaker NM1B-250S

Rated insulation voltage (Ui): 500V; Rated operating current at different rated operating voltages (see Table 1) Usage Category: AC-12, DC-12. Action characteristics: At 70%-10% of the rated control power supply voltage, the tripper should act reliably to disconnect the circuit breaker. Tripper ...

Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

DZ158-125□ plastic shell circuit breaker is mainly used for AC 50Hz, single pole 230V, two, three and four pole 400V; In the line with rated current of 63A to 125A, it is used for overload and short circuit protection of power lines, and can also be used to turn on and off electrical devices and power lines infrequently under normal conditions.

Introduction: NVF3G-QZ series products are the company's special inverter specially designed for the application characteristics and control requirements of the lifting industry, using advanced vector control technology and torque control technology, with fast load dynamic response, large low-frequency torque, strong overload capacity and other characteristics, and integration ...

LAY3 series push buttons are suitable for electromagnetic starters, contactors, relays and other electrical circuits with AC 50Hz or 60Hz, voltage up to 380V and DC voltage up to 220V, for remote control. Conform to the standard: GB/T 14048.5. This article introduces the CHINT/CHINT LAY3 series press ...

NBHLE-40 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230-400V, rated current to 40A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on-off under normal circumstances. The product conforms to IEC61009-1, GB/...

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

NM2 series plastic shell circuit breaker (hereinafter referred to as circuit breaker) has a rated insulation voltage of 1000V, which is suitable for AC 50Hz, rated working voltage of 400V, rated current of 100A-800A in the low-voltage distribution network, which can be used to distribute electric energy and protect lines and power supply equipment from overload, ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

● CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching on and off circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NH2-125 disconnector is mainly used as the main switch in the terminal combination electrical appliances, suitable for AC 50Hz, rated voltage to 400V in the power distribution and control circuit, can also be used to control motors, low-power electrical appliances and lighting, widely used in industrial and mining enterprises, high-rise buildings, commercial and household ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

Introduction: NVF3 inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, strong overload capacity, flexible operation...

CHINT Xinrui NM5 series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current from 16A to 1000A circuits. As the rated current of on, breaking and bearing, it can be overloaded, short-circuited and under-voltage in the line and electrical equipment.

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

NL1-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article describes ...

CHINT/CHINT NXBLE-125 residual current action circuit breaker Rated current (In): 63A, 80A, 100A, 125A (1P+N, 2P); Rated Residual Operating Current (IOn) : AC type: 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Type A: 0.03A, ...