Rorobot Beak Module B-20301[H]/S

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Soft beak module B-20301 [H]/S

Product Introduction
Rorobot Beak Module B-20301[H]/S

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Rorobot soft beak module B-20301[H]/S, B-20301[H]/S tail tip is long, can enter a small space to explore objects, shaped like a bird's beak, is a small soft claw, can be used for narrow gap under the workpiece grabbing, can grab different sizes of thin pieces without changing the gripper, rods, the grasping action is fast and stable, when multiple soft claws are connected in series, can maintain a high degree of consistency and synchronization, adapt to the working conditions of close arrangement.

Features:

It can be installed in the Straight Inlet Connection Module [CM] series or the Test-Through Inlet Flange Connection Module [FCM] series

Straight-through or through-intake versions are available

Zhengjue state kneading tip open, negative pressure state clamping, it is recommended to use with soft touch air drive, fingertip distance G can use working positive pressure adjustment

The soft beak B-20301 [H]/S can be replaced separately

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft touch/Rorobot soft beak module B-20301[H]/S products, if you are interested in the soft touch/Rorobot module, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

More on that

	柔触/Rorobot 法兰连接模块FCM-R04 长95mm 简介：柔触/Rorobot 法兰连接模块FCM-R04 　　产品特点　　符合ISO9409一1：2004标准（即国标GB/T 14468.1一2006/），适配于市面上大部分机器人法兰。　　自重轻，适用于轻量型多关节机器 ...
	柔触/Rorobot 手指模块FM-B4V2 手指宽度18mm 简介：柔触/Rorobot 手指模块FM-B4V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 手指模块FM-A3V2 模块长度82mm 简介：柔触/Rorobot 手指模块FM-A3V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) . ...
	柔触/Rorobot 柔爪BMC-2G1624[HB]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BMC-2G1624[HB]/S 　　产品特点　　真空状态夹紧，正压状态指尖打开，可由真空直接驱动　　配合柔触空气驱动器使用(正负压切换驱动)可提升夹持工件尺寸　　柔爪 ...
	柔触/Rorobot机器人手爪 F12B 压力范围-80~120kPa 简介：多指对向手爪具有超大抓取力度，专为重型产品设计，负载**高可达自重5倍。可立卧双向抓取、适应性强、能完美解决悬挂零件抓取时晃动和定位偏差等问题。其材质柔软和可调节的抓取力度，便 ...
	柔触/Rorobot 法兰连接模块FCM-S01 简介：柔触/Rorobot 法兰连接模块FCM-S01，法兰连接模块[FCM]是机械臂末端和滑移安装板[SMP]之间的连接件，可配合快换模块[QCM]使用,分为弹簧杆式(S)和固定杆式(R)。　　产品特点　　符合IS ...
	柔触/Rorobot 手指F-A8 高度28mm 简介：柔触/Rorobot 手指F-A8 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 手指模块B4V5 模块长度82mm 简介：柔触/Rorobot 手指模块B4V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 手指模块FM-A7V2 手指高度28mm 简介：柔触/Rorobot 手指模块FM-A7V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 手指模块FM-B6V2 手指宽度：18mm 简介：柔触/Rorobot 手指模块FM-B6V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 柔爪BMC-4G64[H]/S 简介：柔触/Rorobot 柔爪BMC-4G64[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...
	柔触/Rorobot手指模块FM 手指尺寸L41×W24mm 简介：手指模块FM是柔触夹爪的动作执行模块，由手指F及固定模块两部分组合而成，依据进气方式，安装位置，组合方式，选择合适的手指固定模块。依据被夹取工件的重量及尺寸，所需夹持力的大小， ...
	柔触/Rorobot 法兰连接模块FCM-R02 重147g 简介：柔触/Rorobot 法兰连接模块FCM-R02，符合ISO 9409- 1:2004标准(即国标GB/T 14468.1-2006/) , 适配于市面上大部分机器人法兰。　　产品特点　　自重轻,适用于轻量型多关节机器人，建 ...
	柔触/Rorobot 柔爪BML-4BG64[P]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BML-4BG64/S，B-4BG64/S 是一款外抓式柔爪，推荐夹持工件尺寸(28-50)mm,开合尺寸在（50.4-80）mm，适合抓取蒸蛋糕、包子、烧麦以及枣糕等这类柔软的食品，B-4BG64/S 是 ...
	柔触/Rorobot 模块B-20006[P]/S 简介：柔触/Rorobot 模块B-20006/S，B-20006/S是一款结构小巧的柔爪，特别适合条状类、杆形工件抓取，可实现包覆式抓取，无痕无损搬运分拣，确保产品不会被划伤，降低不良率。多个柔爪串联时， ...
	柔触/Rorobot 手指模块FM-B6V1 手指高度:21mm 简介：柔触/Rorobot 手指模块FM-B6V1，特点及适用场景:双指模块组合方式,结构紧凑,占用空间小.指间距及安装角度不可调节,适用于夹取微小、轻薄的工件. 　　产品特点　　特点及适用场景:双指 ...
	Soft Touch/Rorobot Finger Module B6V3 Finger height 21mm Introduction: Rorobot Finger Module B6V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
	柔触/Rorobot 手指模块C6V3 模块长度72mm 简介：柔触/Rorobot 手指模块C6V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角 ...
	柔触/Rorobot 手指模块C4V3 模块高度46mm 简介：柔触/Rorobot 手指模块C4V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及 ...
	柔触/Rorobot 柔爪FM-C4V5/LS1[H] 负压行程3mm 简介：柔触/Rorobot 柔爪FM-C4V5/LS1[H] 　　产品参数　　正压行程：11mm 　　负压行程：3mm 　　安全工作气压：300kPa 　　建议负载：70g 　　自重：20g 　　我们以客户为中心的服务理 ...