Introduction: Soft Touch/Rorobot Finger Module FM-A3V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) .
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Fixing method: can be fixed from four directions (optional).
Air intake mode: The air intake joint can be installed from three directions (optional).
External sensor modules can be connected.
Parameters(mm)
Fingertip stroke: 16.5
Negative pressure stroke: 8
Positive pressure stroke: 8.5
Module Height: 45
Finger height: 28
Module length: 82
Finger length: 41
Module width: 31
Finger width: 24
Tare weight: 92
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.
This article introduces the soft-touch/Rorobot finger module FM-A3V2 product, if you are interested in the soft-touch/Rorobot finger module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
SoftTouch/Rorobot Finger Module C7V4 Module height 35mm
Introduction: Soft Touch/Rorobot Finger Module C7V4, Features and Applicable Scenarios: Large Clamping Force, Can Be Used in Series (Use Screw Accessory Kit PK) and Simplify the Trachea Arrangement. It is mostly used in scenarios where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm
Features:
...
|
|
Rorobot B-4B weighs 6.4g
Introduction: Rorobot Soft Beak B-4B
Features:
Replaceable flexible chucks
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G
It can be used as a clamp or external support
Recommended for use with soft-touch actuators
Specifications ...
|
![Rorobot B-4B30[H]/S](https://www.76kj.cn/data/attachment/forum/202207/25/155511bi4ewfaziemeu7z9.jpg)
|
Rorobot B-4B30[H]/S
Introduction: Rorobot B-4B30[H]/S
Features:
The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D.
Soft-touch materials are divided into ...
|
|
Rorobot Air Driver iPCU 2 Rated voltage 24VDC±10%
Introduction: iPCU 2 is available as a standard iPCU 2-SMN and a high-speed iPCU 2-HMN compact controller. Small size, light weight, easy installation. The high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions.
...
|
![Rorobot B-4B40[P]/S The recommended load is 300g](https://www.76kj.cn/data/attachment/forum/202207/29/165626msgs5np59x9mospg.jpg)
|
Rorobot B-4B40[P]/S The recommended load is 300g
Introduction: Rorobot B-4B40/S
Features:
The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D.
Soft-touch materials are divided into conventional ...
|
![Rorobot BML-4H18[H]/S opening and closing frequency: 6 times/second](https://www.76kj.cn/data/attachment/forum/202212/14/150137kx77jxml7q7mji9p.jpg)
|
Rorobot BML-4H18[H]/S opening and closing frequency: 6 times/second
Introduction: Rorobot BML-4H18[H]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and non-marking ...
|
|
Soft Touch/Rorobot Finger Module FM-C4V2 Module Length 51mm
Introduction: Rorobot Finger Module FM-C4V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixation: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
SoftTouch/Rorobot Finger Module A7V4 Module length 134mm
Introduction: Rorobot Finger Module A7V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm.
Product Features ...
|
![Rorobot BML-20301[H]/S weight 3.5g](https://www.76kj.cn/data/attachment/forum/202210/10/162700abdvdzs01u5d9hfd.jpg)
|
Rorobot BML-20301[H]/S weight 3.5g
Introduction: Rorobot BML-20301[H]/S
Product parameters
Tare weight: 3.5g
Maximum load: 30g
External gripping force: 0.3N
Maximum working frequency: 300 times/min
Accuracy range: 0.05mm
Safe working pressure: 1 ...
|
![Rorobot BMC-3B12[H]/S](https://www.76kj.cn/data/attachment/forum/202210/12/160347uzxzapcqyvtvncvs.jpg)
|
Rorobot BMC-3B12[H]/S
Introduction: Rorobot BMC-3B12[H]/S
Product parameters
Tare weight: 3.3g
Maximum load: 10g
External gripping force: 0.1N
Maximum working frequency: 300 times/min
Accuracy range: 0.05mm
Safe working pressure: 24 ...
|
|
Soft Touch/Rorobot Finger F-A7 Finger Width 24mm
Introduction: Soft Touch/Rorobot Finger F-A7
Features:
Finger pattern and fingertip shape: It will affect the coating effect and friction of the workpiece.
If you need to customize the shape of the finger or fingertip, please contact customer service.
Finger material can be selected conventional ...
|
|
Soft Touch/Rorobot Finger Module B7V3 Finger length 73mm
Introduction: Rorobot Finger Module B7V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Soft Touch/Rorobot Finger Module B8V3 Finger width 18mm
Introduction: Rorobot Finger Module B8V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted.
Features:
Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
|
|
Soft Touch/Rorobot Finger Module C6V5 Module width 18mm
Introduction: Rorobot Finger Module C6V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
|
|
Soft Touch/Rorobot Finger Module FM-B6V2 Finger width: 18mm
Introduction: Rorobot Finger Module FM-B6V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
![Soft Touch/Rorobot Soft Jaw BMC-1G071010[PAS]/S](https://www.76kj.cn/data/attachment/forum/202302/13/160210mwczdal1zlndfnlf.jpg)
|
Soft Touch/Rorobot Soft Jaw BMC-1G071010[PAS]/S
Introduction: Rorobot BMC-1G071010/S
Features:
The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G.
The soft claw material is divided into conventional type and non-marking type ...
|
![Rorobot BML-4H18[HAS]/S The recommended load is 15g](https://www.76kj.cn/data/attachment/forum/202212/23/160038d6q7aikxibqq336k.jpg)
|
Rorobot BML-4H18[HAS]/S The recommended load is 15g
Introduction: Rorobot BML-4H18[HAS]/S
Features:
The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D.
The soft claw material is divided into conventional type [H and no ...
|
![Rorobot BMC-4G64[HAS]/S](https://www.76kj.cn/data/attachment/forum/202211/16/145815fdzz5jdaz2gacajq.jpg)
|
Rorobot BMC-4G64[HAS]/S
Introduction: Rorobot Soft Jaw BMC-4G64[HAS]/S
Features:
The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G.
Soft-touch materials are divided into regular [H] and non-...
|
|
Soft Touch/Rorobot Finger Module FM-C6V2 Finger width 12mm
Introduction: Rorobot Finger Module FM-C6V2, Features and Applicable Scenarios: Independent Installation, Can be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional)
...
|
|
Soft Touch/Rorobot Finger Module A5V5 Finger width 24mm
Introduction: Rorobot Finger Module A5V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
|
|
Contact
working hours
