Soft Touch/Rorobot Module B-20006[P]/S

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Module B-20006[P]/S

Product Introduction
Soft Touch/Rorobot Module B-20006[P]/S

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Soft Touch/Rorobot Module B-20006[P]/S, B-20006[P]/S is a flexible claw with a small structure, especially suitable for strip-shaped and rod-shaped workpiece grabbing, which can realize wrapping grabbing, non-trace and non-destructive handling and sorting, to ensure that the product will not be scratched, and reduce the defective rate. When multiple soft jaws are connected in series, the soft jaws can maintain a high degree of consistency and synchronization, which can be applied to 3C, manufacturing, medical industry, etc.

Features:

It can be installed in the Straight Inlet Connection Module [CM] series or the Test-Through Inlet Flange Connection Module [FCM] series

Straight-through or side-intake options are available

The fingertip is open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with the soft-touch air driver, and the fingertip distance G can be adjusted by working positive pressure

The soft beak B-20006[P] can be replaced separately

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the B-20006[P]/S product of Rorobot module, if you are interested in Rorobot module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience. SoftTouch/Rorobot module

More on that

	Soft Touch/Rorobot Finger Module C5V4 Finger length 35mm Introduction: Rorobot Finger Module C5V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory package PK) and simplifies the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...
	SoftTouch/Rorobot Finger Module A7V4 Module length 134mm Introduction: Rorobot Finger Module A7V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	SoftTouch/Rorobot Finger Module C4V5 Module height 44mm Introduction: Rorobot Finger Module C4V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Soft Touch/Rorobot Finger Module FM-C8V2 Positive Pressure Stroke 42mm Introduction: Rorobot Finger Module FM-C8V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Rorobot Beak Module B-20301[H]/S Introduction: Rorobot soft beak module B-20301[H]/S, B-20301[H]/S has a long tail tip, can enter a small space to explore objects, shaped like a bird's beak, is a small soft claw, can be used for a narrow gap under the workpiece grabbing, can be grasped without changing the gripper ...
	Soft Touch/Rorobot Finger Module B5V4 Module width 25mm Introduction: Rorobot Finger Module B5V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory package PK) and simplifies the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...
	Soft Touch/Rorobot Finger Module FM-A4V2 Finger width 24mm Introduction: Rorobot Finger Module FM-A4V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) . ...
	Rorobot BML-3A18[HAS]/S Introduction:Rorobot BML-3A18[HAS]/S,B-4BG64/S is an external gripper soft jaw, recommended clamping workpiece size (28-50)mm, opening and closing size in (50.4-80)mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S ...
	Rorobot BML-20006[P] 30g load is recommended Introduction: Rorobot Soft Jaw BML-20006 Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type and non-marking type.
	Soft Touch/Rorobot Finger Module FM-A5V2 weight 106g Introduction: Rorobot Finger Module FM-A5V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) . ...
	Soft Touch/Rorobot Soft Jaw BML-3C12[H]/S Opening and closing frequency 6 times/second Introduction: Rorobot BML-3C12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into conventional type [H] and non-marking ...
	Rorobot BMC-20005V[PAS] Opening and closing frequency: 6 times/second Introduction:Rorobot Robot Soft Gripper BMC-20005V, B-20005V/S can be used well for 0.18mm-3mm between small and light and thin special-shaped workpieces, even if it is close to the plane, it can also do pinching and grabbing, to ensure that the surface of the product is flawless. For light and small, high blanking accuracy requirements and ...
	Rorobot BMC-2076D5[PAS]/S Introduction: Rorobot BMC-2076D5/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type, ...
	Soft Touch/Rorobot Soft Jaw BMC-3B24[H]/S Introduction: Rorobot Soft Jaw BMC-3B24[H]/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch material points ...
	Soft Touch/Rorobot Finger Module FMA8-V3 Finger width 24mm Introduction: Rorobot Finger Module FMA8-V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing ...
	Rorobot B-20606[P]/S The recommended load is 30g Introduction: Rorobot B-20606/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and the fingertip distance G is supported to use the working air pressure adjustment. Soft-touch materials are divided into conventional type [H] and non-marking type, ...
	Soft Touch/Rorobot Finger F-B7 weight 28g Introduction: Soft Touch/Rorobot Finger F-B7 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Soft Touch/Rorobot Soft Jaw BMC-3A18[H]/S Introduction: Rorobot BMC-3A18[H]/S Features: The fingertips are open in the positive pressure state and clamped in the negative pressure state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G and the external support fingertip distance D. The soft claw material is divided into ...
	Rorobot BML-1G071010 [LPAS]/S Introduction: Rorobot Robot BML-1G071010[LPAS]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. Soft claw material ...
	Soft Touch/Rorobot Finger Module FM-A6V2 Finger length 83mm Introduction: Rorobot Finger Module FM-A6V2, Features and Applicable Scenarios: Independent Installation, Can be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...