Soft-Touch/Rorobot Slip Mounting Plate SMP-4L slot width 4.2mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Skid Mounting Plate SMP-4L

Product Introduction
The mounting angle and position of the SMP-4L Finger Module [FM] can be freely adjusted

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-4L

Soft-Touch/Rorobot Slip Mounting Plate SMP-4L slot width 4.2mm

Features:

It is divided into different styles according to the shape and length of the groove

It can be used for assembly between the finger module [FM] and the flange connection module [FCM].

The mounting angle and position of the finger module [FM] can be adjusted freely

Product parameters

Groove length: 67mm

Slot spacing: 10mm

Groove width: 4.2mm

Thickness: 10mm

Tare weight: 86.2g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the soft-touch/Rorobot skid-steer mounting plate SMP-4L products, if you are interested in the soft-touch/Rorobot skidding skidding mounting plate, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	柔触/Rorobot 模块B-3B12[H]/S 简介：柔触/Rorobot 模块B-3B12[H]/S是一款小巧、修长的柔爪，可以内撑6mm-12.3mm的工件，在狭小空间下，实现圆环状，圆筒状、空心柱状等细小，外部抓取空间有限，脆弱易损坏物件的无痕无损内撑 ...
	柔触/Rorobot 手指模块A6V5 正压行程39mm 简介：柔触/Rorobot 手指模块A6V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...
	柔触/Rorobot 手指模块FMA6-V3 手指长度83mm 简介：柔触/Rorobot 手指模块FMA6-V3，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调。　　产品特点　　特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距 ...
	柔触/Rorobot 柔爪BMC-2076D5[P]/S 简介：柔触/Rorobot 柔爪BMC-2076D5/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距G可使用工作气压调节。　　柔触材质分为常规型和无痕型， ...
	柔触/Rorobot 柔爪BMC-3B12[H]/S 简介：柔触/Rorobot 柔爪BMC-3B12[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...
	柔触/Rorobot 机器人柔爪BML-20005V[P] 建议负载30g 简介：柔触/Rorobot 机器人柔爪BML-20005V，B-20005V/S 能很好的用于0.18mm-3mm之间小而轻又薄的异形工件，即使紧贴平面，它也能做到捏边抓取，确保产品表面无瑕疵。针对轻小、落料精度要求高且 ...
	柔触/Rorobot 手指模块C8V4 手指宽度12mm 简介：柔触/Rorobot 手指模块C8V4，特点及适用场景:夹持力**大,可串联(使用螺丝配件包PK)使用并简化气管布置.多用于多条手指同时工作且工件间紧凑的场景,工件宽度一般大于50mm 　　产品特点 ...
	柔触/Rorobot柔喙/手指模块BM 重量16.50kg 简介：柔触/Rorobot柔喙模块BM系列可安装于连接模组[CM]或法兰连接模组[FCM]；柔喙模块包含柔喙和配套的金具接头；模块组合中附带有直通型金具接头（PN-066）或侧通型金具接头（PN-007）；柔喙 ...
	柔触/Rorobot 手指模块FM-C8V2 正压行程42mm 简介：柔触/Rorobot 手指模块FM-C8V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) 　 ...
	柔触/Rorobot 紧凑型有源驱动器ACU2-B 15812075mm 简介：柔触/Rorobot 紧凑型有源驱动器ACU2-B让驱动更简单，插电即用，小巧方便，清醒桌面机械臂**佳的cp 　　产品参数　　额定功率：18W 　　工作电压：24V 　　输出气压：-85—100kPa 　 ...
	柔触/Rorobot 手指F-C6 指宽12mm 简介：柔触/Rorobot 手指F-C6 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	Soft Touch/Rorobot Finger Module FM-B6V2 Finger width: 18mm Introduction: Rorobot Finger Module FM-B6V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	柔触/Rorobot 柔爪BMC-4H18[HAS]/S 简介：柔触/Rorobot 柔爪BMC-4H18[HAS]/S 　　产品特点　　正压状态指尖打开，负压状态夹紧，建议配合柔触空气驱动器使用，外撑指尖距D可使用工作气压调节。　　柔爪材质分为常规型[H和无 ...
	Rorobot B-4B40[P]/S The recommended load is 300g Introduction: Rorobot B-4B40/S Features: The fingertip is open in the positive pressure state, clamped in the vacuum state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted by supporting the fingertip distance G and the external support finger distance D. Soft-touch materials are divided into conventional ...
	SoftTouch/Rorobot Connectivity Module CM Series Introduction: SoftTouch/Rorobot Connectivity Module CM Series Features: A full range of soft beak modules can be installed at the end Can be mounted on the soft beak series sliding mounting plate [SMP]. Elastic cushioning structure design, especially suitable for multi-layer elastic soft fabric products layered grabbing ...
	柔触/Rorobot 柔爪BML-20006[P] 建议负载30g 简介：柔触/Rorobot 柔爪BML-20006 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，夹持指尖距G可使用工作气压调节　　柔爪材质分为常规型和无痕型，当工 ...
	柔触/Rorobot 手指F-B4 高度21mm 简介：柔触/Rorobot 手指F-B4 　　产品特点　　手指材质可选择常规型，增强型[H]以及防静电型[AS]。　　增强型材质[H]拥有更高的工作压力范围,夹持力**高达到常规材质手指的300%。　　防 ...
	柔触/Rorobot 手指模块FM-A5V2 自重106g 简介：柔触/Rorobot 手指模块FM-A5V2，特点及适用场景:独立安装，可配合SMP滑移安装板安装，指间距及角度可调，固定方式:可从四个方向固定(可选)，进气方式:可从三个方向安装进气接头(可选) . ...
	柔触/Rorobot 柔爪BML-3C12[H]/S 开合频率6次/秒简介：柔触/Rorobot 柔爪BML-3C12[H]/S 　　产品特点　　正压状态指尖打开，真空状态夹紧，建议配合柔触空气驱动器使用，支持指尖距D可使用工作气压调节。　　柔触材质分为常规型[H]和无痕 ...
	柔触/Rorobot 手指模块B4V5 模块长度82mm 简介：柔触/Rorobot 手指模块B4V5，特点及适用场景:模块更轻薄，安装模块指间距**小仅有10mm,适合夹取微小，轻薄的工件。也可串联(使用螺丝配件包PK)使用，但与V4相比，每个手指都需要独立供气 ...