The correct sequence of operation of the disconnector – ifm

1. Inspection distance Detect the stop, start and orientation of elevators and lifting equipment; Detect the orientation of the vehicle to avoid collision between two objects; Detect the setting orientation of the operating machinery and the limit orientation of the moving machine or components; Detect the abort azimuth of the rotary body, the opening or closing of the valve; Detection of cylinders or hydraulic ...

There are four-wire and six-wire load cells. Four-wire system: EXC EXC: Power cord, that is, the DC power supply supplied by the instrument to the sensor. SIG, SIG-: The signal line, that is, the signal line output by the sensor, is output to the instrument. In addition to the above four lines, there are more than two in the four-wire system: SEN, SEN-: feedback line ...

For more than 30 years, ifm is a global group of companies that researches, manufactures and sells components and systems for the detection, control and processing of signals – from standard sensors to application-specific controllers. ...

There are three indicators of precision: precision, correctness, and precision, but how do you understand them? precision It sheds light on the sloppy nature of the measurement results. That is, for a certain stable target (to be measured) by the same measurer with the same sensor and measurement appearance in the appropriate ...

Two directions are detected with one sensor The valve sensor consists of two inductive proximity switches overlapping in the same housing. Depending on the direction of the cam, the upper or lower sensor triggers. Merit: ...

1. After the wireless sensor device is installed, it appears to be beating or the number is inaccurate Reason: There is electromagnetic interference on the site, or the signal line and the power line go to the same trunking. Solution: The product function selected by the customer does not meet the on-site working conditions, and it needs to be installed or replaced.

Capacitive ifm sensors have many applications in everyday life. It is capable of viewing non-metallic materials as well as detecting objects in a non-contact manner. Capacitive ifm sensors are resistant to interference. When an object is detected, the small ...

Easy-to-install sensor with long-service life electronic GMR unit – flush unit This sensor can be conveniently installed in a C-slot Fixed at the end of the housing for stable elastic stress relief Multiple articulations ...

Sensitive parameterization, diagnostics and data processing of ifm sensors are suitable for many different uses9 versions, suitable for a variety of different types of sensitive parameterization, diagnostics and data processing with I/O-Link Ideal for the identification of small data volumes with LR DEVICE or IO-L ...

Key points of maintenance of electronic crane scales, automobile weighbridges, electronic forklift scales, unique effect electronic scales, and the outer dial of Dongguan electronic weighbridge weight sensor: The detection and analysis of problems in the application of load cells, and the common problems of the weighing appearance of automation technology have been in the end of the system software.

Spindle speed detection In order to prevent damage to wind turbines from overspeeding, the rotational speed is detected using inductive sensors and evaluated using safety-relevant speed monitors. The ifm IFS24X series of inductive sensors is equipped with M12 housing (IGS24X series with M18 housing), ...

1. Confirmation of the initial void The various types of oscillating sensors should have excellent linearity at a certain void voltage value, so it is necessary to adjust the appropriate initial void when installing the sensor. According to the characteristic curve of the oscillation sensor, the sensor used for oscillation measurement ...

Amperometric gas sensors operate by reacting with the measured gas and generating an electrical signal proportional to the gas concentration. A typical amperometric gas sensor consists of a sensing electrode (or working electrode) and a counter electrode, separated by a thin electrolytic layer. The gas passes through a porous membrane ...

Not all damaged bearings can be corrected, but the cause and extent of the damage to each damaged bearing must be evaluated to prevent or reduce further damage before considering the correction or replacement of a new bearing. There are many reasons for bearing damage, such as improper equipment, dirt invasion, etc.

Optical fiber sensors and photoelectric sensors are two typical sensors, which are widely used in production and measurement, so what is the difference between the two? Next, we will analyze the differences between the two from the perspective of principle and use. ...

Hydrogen is a colorless and odorless gas, with a density of 0.09 g/L (the lightest gas) under standard conditions, and is poorly soluble in water. At -252 °C, it becomes a colorless liquid, and at -259 °C, it becomes a snowflake-like solid. When measuring hydrogen, pay attention to: Hydrogen...

On November 18, 2008, the 19th Multinational Instrumentation Conference and Exhibition was held in Beijing International Exhibition Center, at the exhibition, as one of the world's leading manufacturers of electronic sensors in the field of industrial automation, Germany ifm electronics showed its advanced sensors and their corresponding ...

ifm sensors have a lot of precautions at the time of installation, and it is necessary to pay attention to the orientation of the device, if the device orientation is not suitable, it will also form damage to the pressure sensor. The time and time requirements of ifm sensors in the installation ...

RTDs and thermocouples are the most commonly used temperature sensing elements for temperature sensors. The operating principle of thermocouple temperature sensor is that the two ends of the contact surface of two kinds of incompatible metals produce a weak and weak voltage when the temperature is inconsistent, and the temperature is measured by expanding the electric, which is not necessary to measure the high temperature. RTD Temperature Sensors ...

First, the application environment of the weighing system Sensors operating in high-temperature environments should use high-temperature resistant sensors, and especially harsh occasions must also be equipped with heat-insulation, water-cooled or air-cooled devices. For use in alpine areas, load cells with heating devices should be considered. ...