Rorobot Air Driver iPCU 2 Rated voltage 24VDC±10%

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
iPCU 2

Product Introduction
The iPCU 2 has two control modes, manual (push button) and automatic (I/O level signal), and is equipped with a variety of robotic arms and PLC terminals.

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: iPCU 2 is available as a standard iPCU 2-SMN and a high-speed iPCU 2-HMN compact controller. Small size, light weight, easy installation. The high-speed type has a larger flow rate and faster response speed, and is suitable for high-speed handling conditions.

Soft Touch/RorobotiPCU 2

Product Features:

With 3 adjustable output pressure ranges, it fully supports actuation from soft beaks to enhanced fingers.

Manual knob type pressure regulation.

The all-in-one panel integrates digital display and operation buttons.

Equipped with mounting blocks and industrial rail card slots, a variety of installation methods.

IP54 electrical protection level, waterproof and dustproof, suitable for all kinds of harsh working conditions, with intelligent alarm function, safe, stable, no need to worry about misoperation, the product has passed the EU CE safety certification.

Product parameters

Voltage rating: 24 VDC ± 10%

Rated power: 12 W

Input air supply: 0.45-1.00 MPa, flow rate > 200 L/min

Output Air Pressure:

-90-60kPa (low-grade)

-90-120kPa (mid-range)

-90——300kPa (high-grade)

Degree of protection: IP54

Housing Material: ABS

Dimensions: 207x132x141 mm

Net weight: 2.0 kg

Lifespan: 2.0 kg

Control mode:

a. Manual buttons

b. I/O, level signal

Working mode: continuous signal drive

The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.

This article introduces the Rorobot Air Driver iPCU 2 rated voltage 24VDC ±10% product, if you are interested in Rorobot Drive, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	Rorobot BMC-3B12[H]/S Introduction: Rorobot BMC-3B12[H]/S Product parameters Tare weight: 3.3g Maximum load: 10g External gripping force: 0.1N Maximum working frequency: 300 times/min Accuracy range: 0.05mm Safe working pressure: 24 ...
	Soft Touch/Rorobot Finger Module B3V4 weight 61g Introduction: Soft Touch/Rorobot Finger Module B3V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	Rorobot BMC-3B14[P]/S The recommended load is 12g Introduction: Rorobot BMC-3B14/S 　　Features: The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted with the distance between the fingertips of the inner support and the fingertips. The soft claw material is divided into conventional type and non-marking type, when ...
	SoftTouch/Rorobot Finger Module A8V4 Module length 148mm Introduction: Soft Touch/Rorobot Finger Module A8V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the workpiece width is generally greater than 50mm. Product Features ...
	Soft Touch/Rorobot Finger F-C5 Fingertip Travel 27mm Introduction: Soft Touch/Rorobot Finger F-C5 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	SoftTouch/Rorobot Finger Module C7V3 Module height 46mm Introduction: Rorobot Finger Module C7V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...
	Rorobot BML-20606 [PAS] 30g load is recommended Introduction:Rorobot Soft Jaw BML-20606, Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G The soft claw material is divided into conventional type and non-marking type, when ...
	Soft Touch/Rorobot Soft Jaw BML-3C12[H]/S Opening and closing frequency 6 times/second Introduction: Rorobot BML-3C12[H]/S Features: The fingertips are opened in the positive pressure state and clamped in the vacuum state, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by supporting the fingertip distance D. Soft-touch materials are divided into conventional type [H] and non-marking ...
	Rorobot BMC-2076D5[PAS]/S Introduction: Rorobot BMC-2076D5/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking type, ...
	Soft Touch/Rorobot Finger F-C7 Negative pressure stroke 29mm Introduction: Soft Touch/Rorobot Finger F-C7 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Rorobot FM-C4V5/LS1[HAS] Introduction:Rorobot FM-C4V5/LS1[HAS] Product parameters Positive pressure stroke: 24.5mm Negative pressure stroke: 16mm Safe working air pressure: 300kPa Suggested load: 380g Tare weight: 90g Our customer-centric ...
	Soft Touch/Rorobot Slip Mounting Plate SMP-2L thickness 8mm Introduction: Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2L Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...
	Soft Touch/Rorobot Finger Module FMA3-V3 Finger width 24mm Introduction: Rorobot Finger Module FMA3-V3, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixing Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Soft Touch/Rorobot Finger Module B5V4 Module width 25mm Introduction: Rorobot Finger Module B5V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory package PK) and simplifies the trachea arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...
	Soft Touch/Rorobot Finger Module C6V4 Finger height 14mm Introduction: Rorobot Finger Module C6V4, Features and Applicable Scenarios: Large Clamping Force, Can Be Used in Series (Using Screw Accessory Kit PK) and Simplifies Tracheal Arrangement. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...
	Rorobot BML-1G071010 [LPAS]/S Introduction: Rorobot Robot BML-1G071010[LPAS]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. Soft claw material ...
	Rorobot BMC-4B32[HAS]/S Introduction: Rorobot Robot BMC-4B32[HAS]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claws ...
	Soft Touch/Rorobot Finger Module B7V5 Finger length 73mm Introduction: Rorobot Finger Module B7V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but compared to the V4, each finger needs to be supplied with air independently.
	Rorobot BMC-20005V[PAS] Opening and closing frequency: 6 times/second Introduction:Rorobot Robot Soft Gripper BMC-20005V, B-20005V/S can be used well for 0.18mm-3mm between small and light and thin special-shaped workpieces, even if it is close to the plane, it can also do pinching and grabbing, to ensure that the surface of the product is flawless. For light and small, high blanking accuracy requirements and ...
	FlexTouch/Rorobot Flange Connection Module FCM-R08 Introduction: Rorobot Flange Connection Module FCM-R08 Features: It conforms to ISO 9409-1:2004 standard (i.e. GB/T 14468.1-2006/) and is suitable for most robot flanges on the market. The maximum load is recommended 20 kg Suitable for non-standard clamps ...