Soft Touch/Rorobot Finger Module A7V5 Module height 58mm

Create Date: 2024-8-30 12:03:23|Source: Soft Touch/Rorobot

Previous
Next
Brand:
Soft Touch/Rorobot

Origin:
Suzhou

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
Finger module A7V5

Product Introduction
Soft Touch/Rorobot Finger Module A7V5 Air intake: The intake connector can only be installed in one direction

quality assurance

Attentive service

Secure transactions

Product Description

Introduction: Rorobot Finger Module A7V5, Features and Applicable Scenarios: The module is thinner and lighter, and the minimum finger spacing between the mounting modules is only 10mm, which is suitable for clamping tiny, thin and light workpieces. It can also be used in series (using the screw kit PK), but each finger needs to be supplied independently compared to the V4.

Soft Touch/Rorobot Finger Module A7V5 Module height 58mm

Features:

Features and applicable scenarios: The module is thinner and lighter, and the minimum finger spacing of the mounting module is only 10mm, which is suitable for clamping small, light and thin workpieces. It can also be used in series (using the screw kit PK), but each finger needs to be supplied independently compared to the V4.

Fixing method: It is fixed with a chute nut, and when it is installed with the sliding mounting plate (page.50), it can be adjusted to three degrees of freedom of front and back, left and right and rotation.

Air intake method: The air intake connector can only be installed in one direction (outside of the finger)

Product parameters

Fingertip stroke: 90mm

Negative pressure stroke: 39mm

Positive pressure stroke: 51mm

Module height: 58mm

Finger height: 28mm

Module length: 144mm

Finger length: 97mm

Module width: 31mm

Finger width: 24mm

Tare weight: 104g

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to meet or even exceed customer expectations, so that customers are satisfied and recognize us. Honest, professional, affordable, fast, so let you rest assured." Integrity and professional service, affordable price, and continuous improvement" is our service concept.

This article introduces the A6V5 product of Rorobot Finger Module, if you are interested in Rorobot Finger Module, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

More on that

	Rorobot B-20006 Accuracy range: 0.05mm Introduction: Rorobot Soft Beak B-20006 Features: Replaceable flexible chucks The fingertips are open in the positive pressure state, clamped in the negative pressure state, and the fingertips are adjustable from G It can be used as a clamp or external support Recommended for use with soft-touch actuators Products...
	Soft Touch/Rorobot Finger F-A8 Height 28mm Introduction: Soft Touch/Rorobot Finger F-A8 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Rorobot BMC-1G071010[LP]/S The recommended load is 12g Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LP]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. The soft claw material is divided into ...
	Soft Touch/Rorobot Finger Module FM-C4V2 Module Length 51mm Introduction: Rorobot Finger Module FM-C4V2, Features and Applicable Scenarios: Independent Installation, Can Be Installed with SMP Sliding Mounting Plate, Adjustable Finger Spacing and Angle, Fixation: Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Soft-Touch/Rorobot Skid Shift Mounting Plate SMP-2S slot width 4.2mm Introduction: Soft-Touch/Rorobot Slip Mounting Plate SMP-2S Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...
	Soft Touch/Rorobot Finger Module B6V4 Module width 25mm Introduction: Rorobot Finger Module B6V4, Features and Applicable Scenarios: Large clamping force, can be used in series (using screw accessory kit PK) and simplifies the arrangement of the trachea. It is mostly used in the scene where multiple fingers work at the same time and the workpiece is compact, and the width of the workpiece is generally greater than 50mm. Features: ...
	Rorobot BML-4H18[HAS]/S The recommended load is 15g Introduction: Rorobot BML-4H18[HAS]/S Features: The fingertips are open in the positive pressure state, clamped in the negative pressure state, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by using the external support fingertip distance D. The soft claw material is divided into conventional type [H and no ...
	Rorobot BMC-2076D5 [P1/S Safe working air pressure 80kPa Introduction: Rorobot BMC-2076D5[P1/S Features: The fingertips are open in the positive pressure state, and the vacuum state is clamped, so it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertip distance G. The soft claw material is divided into conventional type and non-marking ...
	Soft Touch/Rorobot Finger Module B5V3 Finger width 18mm Introduction: Rorobot Finger Module B5V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted. Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and ...
	Rorobot BML-4B32[HAS]/S The recommended load is 50g Introduction: Rorobot Robot BML-4B32[HAS]/S Features: The fingertips are open in the positive pressure state, and the clamping is in the vacuum state, and it is recommended to use the soft-touch air drive, and the working air pressure can be adjusted by clamping the fingertips G and the outer support fingertips D. Soft claws ...
	Soft Touch/Rorobot Finger F-A6 weight 55g Introduction: Soft Touch/Rorobot Finger F-A6 Features: Finger pattern and fingertip shape: It will affect the coating effect and friction of the workpiece. If you need to customize the shape of the finger or fingertip, please contact customer service. Finger material can be selected conventional ...
	Soft Touch/Rorobot Skid Shift Mounting Plate SMP-3S has a weight of 42.4g Introduction: Soft-Touch/Rorobot Skid Mounting Plate SMP-3S Features: It is divided into different styles according to the shape and length of the groove It can be used for assembly between the finger module [FM] and the flange connection module [FCM]. The mounting angle and position of the finger module [FM] can be adjusted freely ...
	Rorobot FM-A6V3/LS1[HAS] Introduction:Rorobot FM-A6V3/LS1[HAS] Product parameters Positive pressure stroke: 39mm Negative pressure stroke: 22mm Safe working air pressure: 300kPa Recommended load: 415g Tare weight: 98g We put our customers first...
	Soft Touch/Rorobot Soft Jaw BML-4BG64[P]/S Opening and closing frequency 6 times/second Introduction:Rorobot BML-4BG64/S, B-4BG64/S is an external gripper type soft jaw, the recommended clamping workpiece size is (28-50) mm, the opening and closing size is (50.4-80) mm, suitable for grabbing steamed cakes, buns, siu mai and jujube cakes and other soft foods, B-4BG64/S is ...
	Soft Touch/Rorobot Soft JawBMC-3B14[PAS]/S The recommended load is 12g Introduction: Rorobot BMC-3B14/S Features: The fingertips are open in the positive pressure state, and clamped in the negative pressure state, it is recommended to use it with a soft-touch air driver, and the working air pressure can be adjusted with the distance between the fingertips of the inner support and the fingertips. The soft claw material is divided into conventional type and non-marking type, when ...
	Soft Touch/Rorobot Finger Module C6V3 Module length 72mm Introduction: Rorobot Finger Module C6V3, Features and Applicable Scenarios: Independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle can be adjusted Features: Features and applicable scenarios: independent installation, can be installed with SMP sliding mounting plate, finger spacing and angle ...
	Rorobot BMC-1G071010[LPAS]/S Introduction: Rorobot Robot Soft Jaw BMC-1G071010[LPAS]/S Features: The fingertip is open in the positive pressure state, and the vacuum state is clamped, and it is recommended to use it with a soft-touch air drive, and the working air pressure can be adjusted for the distance G between the fingertip and the workpiece. Soft claw material ...
	Soft Touch/Rorobot Finger Module FM-A6V2 Finger length 83mm Introduction: Rorobot Finger Module FM-A6V2, Features and Applicable Scenarios: Independent Installation, Can be Installed with SMP Sliding Mounting Plate, Finger Spacing and Angle Adjustable, Fixation Method: Can Be Fixed from Four Directions (Optional), Air Intake Mode: Air Intake Connector Can Be Installed from Three Directions (Optional) ...
	Soft Touch/Rorobot Finger F-C4 Negative Pressure Stroke 9mm Introduction: Soft Touch/Rorobot Finger F-C4 Features: The finger material can be selected as regular type, reinforced type [H] and anti-static type [AS]. The reinforced grade [H] has a higher operating pressure range and a gripping force of up to 300% of the fingers of conventional grades. Defend...
	Rorobot B-3C24[H]/S Introduction: Rorobot B-3C24[H]/S Features: The fingertips are opened in the positive pressure state, clamped in the vacuum state, and it is recommended to use it with a soft-touch air driver, and it supports the fingertip distance G and the external support finger distance D edible working air pressure adjustment. Soft-touch materials are divided into ...