Korea Hyundai Heavy Industries Robot - What are the benefits of welding robots for enterprises

1. The undercut may be due to improper selection of welding parameters, the wrong point of view of the welding gun or the orientation of the welding gun, and the welding parameters can be appropriately adjusted to change the welding parameters, and the welding gun posture of the automatic welding robot and the relative orientation of the welding gun and the workpiece can be adjusted. 2. The welding deviation may be welded.

Daily inspection and maintenance 1) Wire feeding mechanism. Including whether the wire feeding force distance is normal, whether the wire feeding conduit is damaged, and whether there is an abnormal alarm; 2) Whether the gas flow rate is normal; 3) Whether the welding torch safety protection system is normal (it is forbidden to close the welding torch safety protection work); ...

1. Simple operation and stable performance. Robot welding positioners are made according to the specific needs of different manufacturers, so the overall operation is also designed according to the habits of merchants. This kind of equipment is simpler to operate, more stable, stable in performance, and can also ensure ...

1. Welding robot weld seam tracking technology In the welding process of the welding robot, the welding torch deviates from the weld due to the influence of various factors such as strong arc radiation, high temperature, smoke and dust, sputtering, groove conditions, machining errors, fixture accuracy, surface state and thermal deformation of the workpiece. Weld...

1. Stabilize and improve the welding quality to ensure its uniformity. When using robot welding, the welding parameters of each weld are constant, and the quality of the weld is less affected by human factors, which reduces the requirements for the operation technology of workers, so the welding quality is stable. And when manual welding ...

1. The structure of the conveyor belt feeding at the front end of the claw of the palletizing robot generally has a national standard for the roller conveyor belt for bag grabbing, and it is necessary to adopt a standard interface, and for the belt conveyor belt, it is necessary to consider how to achieve it. 2. The selection of the palletizing robot model, the load capacity of the robot ...

1. The welding cycle of each solder joint can be greatly reduced, because the opening degree of the welding tong is precisely controlled by the robot, and the welding tong can start to close during the movement process between the points of the robot; And after a little bit, the welding tong is opened, and the robot can be displaced at the same time, without having to wait ...

1. MIG welding (MIG/MAG arc welding): This welding method uses the continuously fed welding wire and the burning arc between the workpiece as a heat source, and the gas sprayed by the torch nozzle protects the arc for welding. The inert gas is generally argon. 2. TIG welding (inert ...

1) Scrub the axes of the robot; 2) Check the accuracy of TCP; 3) Check the oil level of the residue cleaned; 4) Check whether the zero position of each axis of the robot is accurate; 5) Clean the filter screen behind the water tank of the welding machine; 6) Clean the filter at the compressed air intake; ...

1. Robot system failure (1) A collision occurred. It may be due to deviations in the assembly of the workpiece or inaccurate TCP of the welding gun, the assembly can be checked or the TCP of the welding torch can be corrected. (2) If there is an arc fault, the arc cannot be initiated. It may be due to the fact that the welding wire is not in contact with the workpiece or process parameters.

Under the wave of intelligent manufacturing in the development of science and technology, the production mode of replacing people with machines has gradually appeared in the production lines of major factories. At the same time, many factories are facing the problem of difficulty in recruiting workers and high labor costs, so the palletizer replaces manual work to accelerate and appear in major production enterprises in many directions.

Basic functions The arc welding process is much more complex than the spot welding process, and the tool center point (TCP), that is, the movement trajectory of the wire end, the attitude of the welding gun, and the welding parameters all require precise control. Therefore, in addition to the general functions described above, the arc welding robot must also have a ...

The robot itself The six-joint robotic arm driven by servo motor is the majority, and the type is selected according to the requirements of welding conditions, load, welding operation span, welding accuracy requirements, welding torch cable installation, wire feeder installation and other factors. Robot control cabinet Equipped with arc welding function package ...

Welding robot is an industrial robot engaged in welding (including cutting and spraying), which mainly includes two parts: robot and welding equipment. Among them, the welding robot is composed of the robot body and the control cabinet (hardware and software); The welding equipment, taking arc welding and spot welding as an example, is determined by the welding power supply ( ...

1. Carry out correct debugging. Before using the arc welding robot for welding work, it is necessary to debug the work, adjust the welding parameters according to the specifications of the weldment and the welding environment, observe whether the weld is well filled, and if there are welding defects, it needs to be checked and corrected in time.

1) A manipulator can also be referred to as a manipulator. It is a mechanical device that has a similar function as a human arm and can grasp and place objects or perform other operations in space. 2) Actuator A power device that converts electrical or fluid energy into mechanical energy 3) Knot ...

1) The positioning accuracy of the parts is higher, and the relative position accuracy of the weld is higher, which should be ≤ 1mm. 2) Because the weldments are generally welded by a plurality of simple parts grouped, and the assembly and positioning welding of these parts are carried out in order on the welding fixture, therefore, their positioning and ...

1) Stabilize and improve the welding quality, and reflect the welding quality in the form of numerical values; 2) improve labor productivity; 3) Improve the labor intensity of workers and work in harmful environments; 4) reduce the requirements for workers' operation technology; 5) Shorten ...

The welding robot is composed of a robot and welding equipment, and the robot is composed of a body and a control cabinet. Welding robots can be divided into spot welding robots and arc welding robots, what is the difference between the two? Let me walk you through them: 1. The characteristics of spot welding robots

1. Adjust the welding current Welding current is the circuit current flowing through the welding rod and welding wire during welding, when setting the welding current, it is necessary to refer to the specifications of the weld and the penetration depth and width, the welding current is too large or too small will affect the welding quality, and the welding current is too large.