CHINT/CHINT NA1 series universal circuit breaker

Introduction: NZ7 series automatic transfer switch electrical appliances are suitable for AC power frequency 50Hz, rated working voltage AC400V, rated working current to 800A in the three-phase four-wire dual-circuit power supply network, automatically connect one or several load circuits from one power supply to another, in order to ensure that the load circuit is positive...

JCUK series is suitable for wire connection in circuits with AC 50Hz or 60Hz, rated voltage to 1000V and rated cross-sectional area to 150mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces the CHINT/CHINT Terminal Blocks - ...

NB2LE residual current action circuit breaker is suitable for residual current protection, overload and short circuit protection in lines with AC 50/60Hz, rated voltage of 230V and rated current up to 40A. When the person is electrocuted or the leakage current of the circuit exceeds the specified value, the residual current action circuit breaker can be used in a very short ...

The TB series is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage up to 600V and rated current up to 100A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Comply with the standard ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NS5 series motor starter is mainly used in AC 50Hz (or 60Hz), working voltage to 690V, working current to 32A circuit, as a three-phase squirrel cage asynchronous motor overload, phase failure, short circuit protection and infrequent starting control for use, can be used as distribution line protection...

NH5-125 disconnector is mainly suitable for AC 50Hz, rated voltage to 400V, rated current 125A and below in the power distribution and control circuit, mainly as the main switch in the terminal combination electrical appliances, can also be used for infrequent control of various low-power electrical appliances and lighting, widely used in industrial and mining ...

DTSY666 type three-phase four-wire electronic prepaid electric energy meter (hereinafter referred to as electric energy meter) can realize the functions of electric energy metering, electricity pre-purchase, * large load limit, etc., the product is the ideal electric energy metering product for electricity charging reform, improve the level of scientific management of power supply, and promote electricity consumption. Features ...

SAK series is suitable for AC 50Hz or 60Hz, rated voltage to 800V, rated cross-sectional area of 2.5-70mm2 in power and control circuits, as wire connection. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces CHINT ...

Product Overview NXCQ series contactor emergency start device is a product specially designed and developed for fire water supply system, with the function of manual mechanical emergency start fire pump, in line with GB/T50974-2014 "Technical Specification for Fire Water Supply and Fire Hydrant System" for manual mechanical emergency starting.

Introduction: CHINT/CHINT AC contactor NC3-09 (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 380V (NC3-09 - 16 can be up to 660V) rated working current to 170A power system to connect and break circuits, and with the appropriate ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

NA1H series universal circuit breaker is a technology-leading product, which can fully meet the intelligent power needs of customers and make the electricity of owners and residents more safe and reliable. NA1H series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage to AC690V, ...

NXRC series contactor relays are mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 380V and DC rated voltage to 220V, for switching, breaking and amplifying. ● Conform to standards: GB/T 14048.5, IE ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

DW15 series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working current 200A to 6300A, rated working voltage AC 380V, AC 1140V distribution network, used to distribute electric energy and power supply lines and power supply equipment overload, undervoltage, short circuit protection...

The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...

CHINT/CHINT NXBLE-125G residual current action circuit breaker Rated current(In) : 63A, 80A, 100A, 125A (1P+N.2P) ; Rated Residual Operating Current (IOn): 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Rated Operating Voltage (Ue) ...

Shell Frame Class (A): 1600, 2000, 3200, 4000, 6300A ● Two kinds of breaking capacity: N, H ● Rated voltage Ue (VAC): 380/400/415, 440/525/690V ● Number of poles: 3 or 4 poles (In=6300A only has 3 poles) ● Installation: drawer type or fixed type ...

Rated working voltage (Ue): AC230V, 50Hz; Rated insulation voltage (Ui): 500V; Undervoltage action setting value: (35%-70%) Ue; Mechanical durability: The mechanical durability of the tripper is 4000 operating cycles. Tripping characteristics: external voltage≤35%Ue, ...