The RHI90 series encoders have been fully upgraded

Create Date: 2024-8-30 12:03:23|Source: P+F/Double Blessing

The new RHI90 series encoders offer significant improvements in electrical and mechanical performance

The RHI90 series encoders have been fully upgraded

The RHI90 series encoders have been fully upgraded

With the increasing use of electronic components and equipment in the field of automation, the risks of malfunction and damage caused by electrical and electromagnetic disturbances are also increasing. These disturbing signals, for the encoder, will cause the control receiver to misread the additional clutter in the encoder pulse signal, and then lead to results such as excessive speed fluctuations and no signal in the encoder. In the worst case, it will directly lead to the acceleration of the aging of the encoder protection component circuit, the distortion of the output signal, and even the burnout.

In order to improve the encoder experience of the RHI90 series in an all-round way, we will upgrade all RHI90 series encoders in March 2016, following the RHI90 EMC enhanced special series.

peculiarity

With the addition of multi-level protection equipment against various strong disturbances, the excellent electrical embodiment exceeds the CE standard

"S" type stator reed design

The end face of the device does not collide with the device screws

Save the copper sleeve of the device and reduce the difficulty of the device

Prevent the failure of functions caused by incorrect devices by customers

Add axial channeling/radial runout absorption capacity to improve measurement accuracy under the same working conditions

TufLok coated anti-loosening screws replace ordinary screws to cope with severe vibrations

Applied Careers

Careers in electrical machinery

Offshore Engineering: Ships and Engineering Platforms

Lifting and logistics transportation occupations: port machinery, bulk material handling and transportation, crane lifting

Metallurgical occupations

Mining: Automation of mine production

More on that

	Common dry contact signals for safety barriers The dry contact of the barrier is an electrical switch that has two positions: closed and disconnected. There is no polarity between the two contacts of the dry contact and is interchangeable. That is, a simple switch, the contact does not provide power supply, and the power supply can be used to control the condition of the equipment. But it doesn't offer ...
	The difference between fiber optic sensors and photoelectric sensors – we are blessed Optical fiber sensor and photoelectric sensor are two typical sensors, which are widely used in production and measurement, so what is the difference between the two? Fiber optic sensor skills are developed on the basis of fiber optics, optical communications, and optoelectronic skills, and electromagnetic...
	The selection of safety barriers 1) The operating voltage of the safety equipment connected to the safety barrier shall not exceed the maximum acceptable voltage of the safety barrier. Otherwise, it should be isolated from the system by using techniques such as optical resistance insulation, or using barrier safety barriers; ...
	We made a wonderful appearance at SIAF 2022 The 2022 Guangzhou World Industrial Automation Skills and Equipment Exhibition (SIAF) landed at the China Import and Export Fair Complex on March 3, kicking off the prelude to this year's industrial automation career exhibition. As the driver and innovator of Industry 4.0, we continue to provide customers with the future of the future.
	Characteristics and classification of miniature sensors – BEB Simple fundamental characteristics and classification of miniature sensors (1) As far as a single sensor is concerned, a miniature sensor refers to a small sensor from micrometer to millimeter and even nanometer, mainly using precision machining, microelectronics and microelectromechanical system skills to reduce the size of the sensor. (2) ...
	Introduction to the throttle azimuth sensor – Doubleblessed What is the function of the throttle orientation sensor? The primary function of the throttle azimuth sensor is to detect whether the starting motor is in the idle condition or the load condition, and whether it is in the acceleration condition or the deceleration condition. The shaft of the resistor is linked to the throttle, it has two contacts: a fully open contact and an idle ...
	Advantages of HiC2441 Technological advantages The HiC2441 can adapt to any signal type without the need for complex configuration configurations, and users can complete loop commissioning very simply, quickly and reliably. The HiC2441 is a universal barrier that can be adapted to any common signal type. Meantime...
	What are the types of displacement sensors – Doublebless 1. The displacement sensor is a device that converts the motion displacement of the object into measurable electrical quantities. It is usually used to convert physical quantities such as displacement, orientation, deformation, oscillation, and size that are not convenient for quantitative detection and processing into electrical quantities that are easy to quantitatively detect and facilitate information transmission and processing. ...
	There are two types of encoders and common models An encoder is a device that compiles or converts signals or data into signals that can be communicated, transmitted and stored – encoders can be divided into two categories: incremental and absolute. Incremental encoders are the most important way to convert bits ...
	Terminology for the selection of pressure sensors – we are blessed Pressure: The force acting vertically and evenly over a unit area. In physics, this is called "pressure". Range: i.e. the scale of pressure. Refers to the use of sensors to measure the amount of pressure. Medium: refers to the object to be measured. Generally steam, water, oil, acid, alkali or mixture. Precision...
	The structure of proximity sensor switches – we are blessed 1. Durability The reason why the switch has such a long life is that the switch acts as elastic from the vertical direction of the elastic membrane. Although millions of peristalsis are carried out after the elastic membrane, because the creep rate is very small, only 0.1 - 0.3m ...
	Wireless HART technology for industrial processes WirelessHART uses the 2.4 GHz band (which is no-nonsense and globally) as a transmission medium for a variety of radio skills, including WLAN, Bluetooth, and ZigBee. However, WirelessHART is more than just a variant of WLAN. ...
	Eltra Incremental Rotary Encoder Types Eltra incremental encoders fall into three categories: Optical solid shaft incremental encoder Eltra. The couplings in these types are made of solid shafts. · EL-ER 30 E/H； · EH 38 A/B/D； · EL-E ...
	How torque sensors work – we are blessed Like many other types of sensors, torque sensors are measured using strain gauge technology. The sensor is usually a metal elastomer with a strain gauge mounted on it. Strain gauges are firmly attached to the elastomer. If an external load acts on the sensor, the measuring body will ...
	How to use different types of tension and compression sensors – we are blessed with blessings Tension and compression sensors are one of the load cells. A device that converts physical data signals into accurately measured electronic signal outputs. It is widely used in industrial production weighing equipment, platform scales, electronic scales, hook scales, batching scales and other dynamometers. But different types of tension and compression sensors are used differently, and now ...
	The principle of installation of safety barriers 1. The safety barrier should be installed in a safe place, and the environmental conditions should meet the requirements of the "application conditions" in the "Safety Barrier Selection Sample". 2. The connecting wires of the intrinsically safe end (blue end) and non-intrinsically safe end circuits of the barrier safety barrier are in the sink ...
	There are four classification forms of P+F encoders 1. Classification according to the engraving method of the code disc (1) Incremental type: that is, a pulse signal is announced every time the viewpoint of the unit is turned (there is also a sine and cosine signal, Then it is subdivided and choppered out of a higher frequency pulse), which is generally output for phase A, phase B, phase Z, phase A, ...
	Introduction to the application of the tracking system The Finder and the Finder are in use in the automotive industry for the first time, and a variety of ways to use them are proposed: RFID is commonly used in the automotive industry for tracking and traceability. There is a growing demand for customized treatment solutions.
	Factors influencing the measurement accuracy of ultrasonic sensors Measurement accuracy generally refers to the affirmative accuracy of the measurement value of the analog output. Depending on the echo transmission moment, the measurement accuracy of the ultrasonic sensor relies on several physical parameters. These parameters are generally related to air and internal errors. Environment...
	The R100 and R101 series of photoelectric sensors – we are blessed With the launch of the new R100 and R101 series of photoelectric sensors, we have expanded our Sensing Skills 4.0 product line with innovative intelligence. The R100 and R101 range include two light source plans: the robust PowerBea...