Tension and compression sensors are one of the load cells. A device that converts physical data signals into accurately measured electronic signal outputs. It is widely used in industrial production weighing equipment, platform scales, electronic scales, hook scales, batching scales and other dynamometers. But different types of tension and compression sensors are used differently, now let's take a look:
1. The S-type tensile and compression sensor is suitable for weighing with detailed specifications such as platform scales and silo weighing system software, especially some high-precision production weighing system software. Due to its aspect ratio stability and sealing design, it can maintain good work for a long time even in the natural environment of the pole.
2. The tension sensor has the advantages of compact structure, beautiful appearance, high measurement accuracy and strong anti-error ability, and is widely used in measurement verification and automatic control systems such as composition, mechanical equipment production, tension testing machine, etc.
3. The L-type tensile and compression sensor has high accuracy, low drift, small size and strong bias resistance, and is widely used in the measurement and verification of micro-force value and automatic control system.
4. The U-shaped tensile and compression sensor has compact structure, easy installation, high measurement accuracy and strong anti-error ability. It is widely used in accurate measurement and automatic control systems, such as railway signal operation, batching, mechanical equipment production, etc.
5. ZT type small and medium-sized column tensile sensor has the advantages of column type, S type, compact structure, beautiful shape, high measurement accuracy, and strong anti-deviation ability. It is widely used in batching, mechanical equipment making, tensile testing machine and other measurement, quantity verification and automatic control system.
6. ZX pivot pin sensor is a high-precision tension and compression sensor. It is suitable for all kinds of driving, lifting arrangements, railway signal operations, etc. It is widely used in measurement and verification operations.
7. The B-type tensile sensor has the advantages of column and S-type structure, and has high measurement accuracy. It is widely used in tensile testing, measurement verification and automatic control systems, such as composition, mechanical equipment making, cranes, steel ropes and ropes.
8. D-type small and medium-sized tensile sensor has compact structure, easy and fast installation, high measurement accuracy and strong anti-deviation ability. It is widely used in batching, mechanical equipment production, tensile testing machine and other measurement verification and automatic control systems.
9. The X-type cantilever beam tensile and compression sensor has a low appearance design. Of course, it has high-quality linearity, good resistance to side forces, compact structure, and strong anti-error. It has overvoltage protection and can be used in a variety of electronic scales.
|
More on that
|
Eltra Incremental Rotary Encoder Types
Eltra incremental encoders fall into three categories:
Optical solid shaft incremental encoder Eltra. The couplings in these types are made of solid shafts.
· EL-ER 30 E/H；
· EH 38 A/B/D；
· EL-E ...
|
|
Advantages of composite isolation barriers
Technological advantages
The HiC2441 is adaptable to any signal type, eliminating the need for messy configuration configurations, allowing users to complete loop commissioning simply, quickly and reliably.
The HiC2441 is a universal barrier that can be adapted to any common signal type. Meantime...
|
|
How to choose a pressure sensor fitting – we are blessed
There are not many single ferrule terminal joints on the market now, and most manufacturers are using double ferrule terminal joints, and the market price is about 9-18 yuan, and the price is different according to different types. Fittings, whether double ferrule end fittings or single ferrule end fittings, are all selected.
|
|
P+F precautions for the use of safety barriers
The safety barrier, also known as the safety energy limiter, is an important part of the intrinsic safety system. There are two main types of safety barriers: P+F Zener barriers and P+f barrier barriers. The core components of the Zener barrier are Zener diodes, current-limiting resistors and fast fuse wires.
...
|
|
Installation steps for angle sensors – we are blessed
1. Position with the sensor installation boss, and fix it on the metal plate with screws, nuts or pressing plates. When installing the sensor, it is strictly forbidden to turn and drill the shaft and shell to avoid the shaft or shell being subjected to external impact and pressure, and the axial and radial direction of the shaft is not allowed to be subjected to impact force and pressure ( ...
|
|
What are the types of displacement sensors – Doublebless
1. The displacement sensor is a device that converts the motion displacement of the object into measurable electrical quantities. It is usually used to convert physical quantities such as displacement, orientation, deformation, oscillation, and size that are not convenient for quantitative detection and processing into electrical quantities that are easy to quantitatively detect and facilitate information transmission and processing.
...
|
|
The main categories of encoders are as follows
1. Classification according to the way of engraving the disc is different
(1) Incremental type: that is, every time the angle of the unit is emitted, a pulse signal is emitted (there is also a sine and cosine signal, and then it is subdivided, and the pulse with a higher frequency is chopped), usually the output of phase A, phase B, phase Z, phase A and phase B are ...
|
|
Vibratory load cell performance – we are blessed
Vibrating load cell: When an elastic element is subjected to a force, its natural vibration frequency is proportional to the square root of the force. By measuring the change in the natural frequency, the force of the analyte acting on the elastic element can be calculated, and then its mass can be found. There are two types of vibrating sensors: vibrating wire type and tuning fork type.
...
|
|
Commonly used sensor type – Doublebless
1. Semiconductor type Semiconductor gas sensor is a gas sensor that uses semiconductor gas sensing elements as sensitive elements, which is the most common gas sensor, widely used in combustible gas leakage detection equipment in homes and factories, and is suitable for the detection of methane, natural gas, liquefied gas, hydrogen, etc.
|
|
Instructions for use of ultrasonic switches
The ultrasonic switch can be parameterized via two buttons on the side of the sensor. The width of the ultrasonic sound cone also allows the sensor to be mounted as required. The user can set the switch point according to his needs, and the switch point can be adjusted within 5 minutes after powering on. In more than 5 minutes, if ...
|
|
Classification of the movement mode of the displacement sensor
The displacement sensor has no sliding contacts, is not affected by non-metallic elements such as dust during operation, has low power consumption, and has a long service life, so it can be used in various bad conditions. Displacement sensors are mainly used to intelligently control the analog quantity of automation equipment production lines.
The displacement sensor selects laser three...
|
|
Introduction and installation matters of the safety barrier
The safety barrier, also known as the safety factor meter, is an important part of the intrinsic safety system.
There are two main types of barriers: P+F Zener barriers and P+f isolated barriers. The core elements of a double Forgina barrier are a diode, a current-limiting resistor and a fast fuse.
...
|
|
The SLP barrier is modular
In the process of modernization, the SLP series of safety barriers is gradually forming a modular safety system, constantly innovating, and on the basis of innovation, more stringent requirements for quality.
VISOLUX offers a wide range of beams ...
|
|
Selection criteria for proximity switches
1. The output working voltage of the proximity switch is selected, usually DC type DC24V or AC AC250V optional;
2. Proximity switch output mode selection, usually NPN-normally open, NPN-normally closed, PNP-normally open, PNP-normally closed, 2-wire normally open, 2-wire normally closed, DC 3-wire, DC 4-wire ...
|
|
Our basic sensor detection method
1. Proximity sensing.
Proximity usually refers to exploration:
a. Whether the target exists.
The scale or abbreviated shape of an object.
Proximity sensors can be divided into touch, non-touch, and imitation. The choice of sensor depends on physical, environmental, and control conditions.
Machine...
|
|
Sensor installation points – a blessing
Device points (device bolts)
The sensor of the device is fastened with high-strength bolts of the specified grade. (8.8, 10.9, etc.).
For sensors that require a gasket for the device, a washer must be placed on the bolt before it can be installed.
...
|
|
Introduction of differential pressure sensors
A differential pressure sensor is a sensor used to measure the difference between two pressures, and is generally used to measure the pressure difference between the front and back ends of a certain equipment or component.
It is mainly used to measure the exhaust pressure difference between the front and rear channels of the exhaust particle trap (DPF) of the car engine.
In order to achieve a platoon ...
|
|
The output signal of the torque sensor is the sensor of the company
1. The basic output method of torque sensor signal is: square wave signal and pulse signal.
Voltage analog signal output or current analog signal output (unidirectional, static torque measurement) can be made according to user needs.
2. Twist ...
|
|
The special safety barrier base plate for the H series dark horse system
The new base plate has been developed and upgraded according to the technical parameters of the Dark Horse system, and is specially adapted to the HIMax safety system. In addition to their comprehensive functionality, these baseplates also offer the look and feel of the Dark Horse System baseplates for use in non-risk areas. The new product line masks all signal types and ...
|
|
The FDH-1 simplifies bus installation
1. Mastery: Take control of your bus
The handheld bus diagnostic device FDH-1 can be regarded as an increasingly intelligent multimeter. It only needs to press a button to quickly view any network segment. And it can work independently, which is a good addition to the engineer's stuff box.
...
|
|
Contact
working hours
