Why can't the latest version of Kunlun Tongtai communicate?

The first channel of all non-board devices in Kunlun MCGS is the communication status channel. After entering the running environment, after the device driver starts working, the communication status of the device is returned in this channel, for example, 0 indicates that the device communicates normally, and non-0 indicates that it is abnormal. Elder brother...

1. Offline programming mode: the programmable logic controller and the programmer share a CPU, and when the programmer is in programming mode, the CPU only provides services for the programmer and does not control the field equipment. After completing the programming, the programmer switches to the running mode, and the CPU controls the field device.

1 Resistive touch screen - Not afraid of water and dirt - It has the cost advantage of small size, which is suitable for industrial control products and personal portable products - Fear of scratches, low light transmittance, low temperature dullness 2. Surface acoustic touch screen - New and easy to use, suitable for short-term products ...

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

The operating environment of Kunlun Tongtai TPC project was actively restarted If the CPU usage reaches 99% during project operation, the operating environment will be automatically exited and then started from the beginning. The reasons for high CPU usage may be: too many bitmaps, loops, etc.

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

1. First of all, go to the MCGS official website to download the latest embedded version, and you can find the PPI of S7-200 in the "Equipment Toolbox", which is compatible with the driver of Siemens SMARTPLC. 2. Secondly, all non-board equipment in Kunlun MCGS is the first to pass ...

70. Omron PLC: Parent device parameter settings (1) The communication parameter setting of the parent device of the universal serial port should correspond to the communication parameter setting of the PLC serial port, and the default standard parameters of the PLC are set to: 9600, 7, 2, E (even check); (2) Users can set it according to their needs, and it is recommended to ...

Screen structure: ITO Film and ITO Glass are laminated, and the middle is isolated by a DOT point Outlet cable: FRC copper cable (flat conduction wire) length: 200mm Connection location with touch screen: Withstand tensile force: 2.0 kg horizontal with the screen, 1.0 kg vertical with the screen...

Kunlun touch screen is a positioning device, the user can directly enter coordinate information by pointing to the computer, just like a mouse and keyboard, it is also an input device. Kunlun touch screen has many advantages such as durability, fast response, space saving, and convenient communication. With this technique, ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

First of all, on the back of the Kunlun Tongtai touch screen, determine the specific model of the Kunlun Tongtai touch screen. Open the Kunlun Tongtai touch screen programming software, click [File] in the menu bar and open it. In the File drop-down menu, select Project Settings In the pop-up Modify Project ...

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the touch screen ...

41. How to implement pop-up sub-windows This is achieved using the OpenSubWnd() function, which is described in the MCGS help document. 42. After power failure, save it as the initial value of the next boot Use it in the script of the exit strategy! SaveSingleDataInit() and ! FlushDat ...

1. Clear the configuration engineering password process (1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel; Attestation File Format: Our company is XXX, ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

The capital boost under the "Internet +" has profoundly affected the thinking mode of the commercial society and the consumption habits of the material world, and it is also the rapid penetration and subversion of traditional industries. In fact, as the intersection of the industrial control industry and the Internet, the marketing model of the HMI industry is being adopted by innovators.

1. Install the MCGS configuration software on the computer first, then find the power supply to supply power to the touch screen, connect the screen with the computer with the communication cable, and upload it in the software. 2. After we install the software, first go to open the software, and then in the drop-down option of the file menu, select ...

Nowadays, intelligent technology is developing rapidly, and the scene of human-computer interaction can be seen everywhere, whether it is a computer used at work or a self-service terminal in the day, these are all touchscreen all-in-one machines around you. With the rapid development of the Internet and IOT, the touch screen all-in-one machine is used as a human ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. A finger placed on the panel ...