Turck presents IO-Link-enabled pressure sensors

1. Mechanical damage The most common fault of servo response encoder is various mechanical damage, including hardware damage to the encoder's internal component structure (code disc, shaft, bearing, etc.) due to mechanical oscillation, collision, impact, wear and tear. 1) Oscillation Pass...

First of all, when using load cells, it is necessary to adjust the orientation of the sensors. Think of the sensor as a fragile product, cut the oscillation of the sensor, and try to handle it gently, because many sensors have elastomeric devices planned internally, and these elastomeric devices are critical to the stability of the sensor, ...

The condition for the replacement of the load cell is that the axis of the applied force coincides with the axis of the force of the sensor, and we should know one thing, that is, with the increase of the rated load, the microvolt/indexing signal output by the sensor decreases. About the second ...

High measurement accuracy, compact structure, small size, light weight, good sealing performance, good durability and good long-term stability. The structure of the elastomer is simple, and the output symmetry is good. The natural frequency is high and the dynamic response is good, which is conducive to dynamic measurement. Insensitive to oscillations ...

When selecting a pressure sensor, it is necessary to consider the internal elements of the sensor. One of the many questions we often encounter in industrial production projects is what type of sensor should we choose, the characteristics of the sensor, the scale and the data requirements? Let's dissect exactly ...

The first step is to look at the input quantity, how to see the input amount? Performance targets can be judged by the sensor's range or measurement scale, as well as its overload capacity. The second step is to look at the static characteristics, the static characteristics are the input signal recorded when static, and the parameters that express the static characteristics mainly include linearity, delay...

Temperature sensors are widely used in various occupational fields, such as: medical occupations, heavy industry, water treatment, wind power occupations, rail transit, HVAC occupations, energy and environmental protection, food occupations, hydropower stations, petrochemical industry, metallurgical industry, printing and dyeing pharmaceutical and other occupations are used. ...

Robots are called robots because they have a lot of intelligent qualities. In the world of human facial features, the facial features of robots are sensors. Sometimes, a human function needs to be completed by multiple sensors working together on a robot. Now the intelligent robot is classified ...

Torque sensors are able to convert the physical change of torque into accurate electrical signals, which are mainly used in the power range, and have the characteristics of long service life, high accuracy and strong reliability. Torque sensors are not common in our daily lives, but their use is very important. Currently, the twist ...

In modern industrial production, especially in the process of automated production, it is necessary to use various sensors to monitor various parameters in the production process, so that the equipment is in normal or optimal condition, so that the product can reach the best quality. Therefore, it can be said that if there are many excellent sensors, modern ...

Based on the principle of heat exchange, Turck's flow sensors use energy changes to detect wear-free changes in flow velocity, and send an alarm signal through the processing circuit, with LED indicators indicating the flow status: 1. Traffic ...

(1) After proper appearance, the frequency response value of the turck pressure sensor in Germany is verified under normal atmospheric pressure and standard temperature conditions. (2) Verify the accuracy of the coding of the turck pressure sensor in Germany and the corresponding frequency response signal. ...

The first is pressure, and the transmitter can't afford to lose it. In this case, look at the pressure connector to see if it is leaking or clogged, if you admit that it is not, look at the wiring and see if the power supply is normal, simple pressure to determine if the output has changed, or if there is an output at the zero point of the sensor ...

A linear displacement sensor is an electrical signal device that converts linear mechanical displacement into a linear or arbitrary function relationship through a potentiometer element. The potentiometer planned to complete the measurement of displacement intent must require a confirmation relationship between the change in displacement and the change in resistance. So so...

Resistance strain gauge is a kind of element used to measure strain, which is made of 0.02-0.05mm diameter constantan wire or nickel-chromium wire wound into a grid (or corroded into a grid with a very thin metal foil) in two layers of insulating sheet (substrate), and is connected with tinned copper wire and strain gauge wire as a strain.

Launch of the LUS211 ultrasonic level sensor, Turck's first ultrasonic sensor with a local LED display. The LUS211 is a programmable sensor for measuring solids and liquid levels in housings. Because...

An example of Turck's debugging method for turck pressure sensors is as follows: Select a 0.08-2MPa planned controller, request the pressure to be reduced to 0.8MPa (down switching value) to announce the contact signal, and the operation process is as follows: ​ Screw the product into the hydraulic pressure ...

1) Pay attention to the structure and data of the object to be measured, and the general laser displacement sensor needs to measure the triangular optical path with intact requirements. If the measured object has deep grooves or messy appearance, it may cause the triangular light path to be occluded, so that it cannot be measured. There are also some light-absorbing materials, such as black rubber and other materials, most of the light intensity will be ...

The safety relay is a safety loop with all the necessary control parts, which accepts the safety input, and after the internal circuit discrimination, the deterministic output switching signal to the control circuit of the equipment. To put it simply, the safety relays are all two-channel signal type, and only two channel signals are positive.

(1) Conductive plastic displacement sensor Conductive plastic displacement sensor uses a special process to coat the DAP (didipropylphthalate) resistance paste on the insulating body, heat and polymerize to form a resistance film, or press the DAP resistance powder thermoplastic into the groove of the insulating matrix to form a solid body as a resistor.