The general principle of temperature instrument selection - Wuzhong instrument

On December 2, 2019, the China-Russia East Route Natural Gas Pipeline Project was officially put into operation. The large-diameter pressure regulator jointly developed and manufactured by Wu Zhong and China Petroleum Pipeline Branch was put into use at Changling Natural Gas Transmission Station in Jilin Province and successfully ventilated. ...

Classification of valves, types of structures, functional applications, pressure levels, temperature classifications, valve body data classifications, and general classifications The types of valve products are complex, and the statements are inconsistent, some are divided according to the use (such as chemical valves, oil valves, oilfield valves, power station valves, etc.), and some are according to the medium.

The correct use of thermocouples can not only accurately obtain the temperature value to ensure that the product is qualified, but also save the data consumption of thermocouples, which can not only save money but also ensure product quality. Incorrect devices, thermal conductivity and moment lag are the first errors in the use of thermocouples.

1. System overview The valve automatic control system controls the solenoid valve equipment placed in the field by announcing the instructions of the control service center in a wireless way, and then realizes the opening and closing of the solenoid valve, and the opening and closing status of the valve, the operation status, whether the equipment is online, historical data inquiry, etc.

1. Glander type This is the form that is used a lot. The same form can be different in many details. For example, in terms of hold-down bolts, it can be divided into T-bolts (for low-pressure valves with a pressure of ≤ 16 kg/cm²), stud bolts and loose joints. From the gland point of view, it can be divided into integral and ...

1. Flange connection Flange connection: Flange connection refers to the detachable connection of flanges, gaskets and bolts as a group of combined sealing structures. Pipeline flange refers to the flange used for piping in pipeline equipment, and refers to the inlet and outlet flange of equipment used in equipment.

Features of Gate Valve: Light weight: The body is made of high-grade ductile iron, and the weight is about 20%-30% less than that of the traditional gate valve, and the device is easy to repair. Flat-bottomed gate seat: The traditional gate valve is often washed by water and the pipe is due to foreign objects such as stone, wood, cement, iron filings, etc.

There are two main reasons for the leakage of cryogenic valves, one is internal leakage; The second is leakage. 1) Internal leakage of the valve The main reason is the deformation of the sealing pair at low temperature. When the temperature of the medium drops to the point where the data undergoes a phase change, the volume changes ...

1. High-precision operation, can complete rapid palletizing and destacking operations. (1). The conditions of the process Factors such as temperature, pressure, flow, viscosity, corrosiveness, toxicity, pulsation and other factors in the process determine the appearance of the ...

The basic structure of the centrifugal pump is composed of six parts, namely the impeller, the pump body, the pump shaft, the bearing, the sealing ring, and the stuffing box. 1. The impeller is the core part of the centrifugal pump, its speed is high and the output is large, and the blades on the impeller play a role in the ...

1. Remove the nut and identification plate at the upper end of the valve stem, and look at the lock nut raw material inside, the raw material is brass, otherwise it is a counterfeit product. 2. Look at the steel seal, the valve steel seal is pressed on it before the valve has passed the heat treatment, and the professional steel seal skills are used.

Pneumatic control valve is one of the instruments widely used in petrochemical enterprises. It is of great significance to ensure the normal operation and safe production of the process equipment by operating accurately and normally. Therefore, it is necessary to strengthen the maintenance of pneumatic control valves. First, the key points to check the location during maintenance ...

Load the organization The role of the loading tissue is to apply a downward loading force from the top of the pressure reducing valve. The loading structure of the FITOK pressure reducing valve is mainly the loading of tension springs. Tension spring loading has the advantage of reliability and low cost, and is the most versatile loading device in pressure reducing valves.

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to restrain the lever from deviating, and the tension spring safety valve should have the equipment to improve the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

There are a total of eight functions of the conditioning valve, and the eight functions of the full-function ultra-light conditioning valve are excellent, so it is called "full-function valve". 1. The conditioning function is one of the main functions of the conditioning valve, which is manifested as (1) flow characteristics; (2) Adjustable ratio R; ...

　　Technical characteristics of single eccentric sealed butterfly valve In order to solve the extrusion problem of the butterfly plate and the valve seat of the concentric butterfly valve, a single eccentric butterfly valve is produced, and its structural characteristics are that the shaft of the valve stem deviates from the center of the butterfly plate, so that the upper and lower ends of the butterfly plate are not ...

The biggest difference between the electric single-seat conditioning valve and the electric sleeve conditioning valve lies in the performance and application, but both have their own advantages and shortcomings, and the advantages of one may be the lack of the other, which can complement each other and be used in different occasions. There is no difference in appearance, first of all, the two ...

First, there is a leak in the safety valve. The industry said that when there is a small leakage in the safety valve, it is generally not easy to find, but even a small leakage point will expand in the erosion. The test method is to test ...

Double-seat cast ball angle valve The nominal diameter is 40-200 mm Nominal pressure ANSI 125, 150, 300, 600JIS10, 16, 20, 30, 40K PN1.6, 4.0, 6.4MPa Connection type Flange...

The commonly used medium for valve pressure testing is water, oil, air, steam, nitrogen, etc., and the pressure testing methods of various valves are as follows. (1) Globe valve and throttle valve For the strength test of globe valve and throttle valve, the assembled valve is usually placed in the pressure test frame, the valve disc is opened, and the medium is injected into the ...