CHINT/CHINT Terminal Appliances — Terminal Box — PZ30 Series Open/Concealed Distribution Box

Introduction: CHINT/CHINT NTNC2 series AC contactor AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60Hz, rated working voltage to 690V, rated working current to 800A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate ...

NB1L residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 40A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can quickly cut off the fault power supply in a very short time, protect people and electrical equipment...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

NPH1 series push button is suitable for AC 50Hz or 60Hz, rated working voltage to 415V and DC rated voltage to 250V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal indication ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment. Suitable...

NBHLE-63Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T 1691 ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

SHT-B5 shunt tripper (hereinafter referred to as tripper) is mainly used for matching with NB5 series circuit breakers, and is suitable for long-distance shunt tripping operation in lines with AC 50Hz and rated voltage to 415V; AX-B5 auxiliary contact is mainly used for AC 50Hz, rated heating current to 6A, rated ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

Introduction: CHINT/CHINT Miniature Circuit Breaker NXB-40 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters Forehead...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

NBHLU-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V power distribution and control system, rated current to 63A in the line to play leakage, overload and short circuit protection, at the same time, this series of products have the corresponding function of surge protector. The product conforms to GB/T 16917 ...

Introduction: NVF3G-LS series special inverter for wire drawing is a cost-effective special inverter for the wire drawing and winding industry. NVF3G-LS series integrates winding control function, supports winding diameter calculation, tension PID control and wire break detection function, etc., so that the mechanical and electrical control system ...

CHINT/CHINT NXBLE-63Y residual current action circuit breaker Rated current (In): 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A; Rated residual operating current (IOn): 0.01A, 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Rated operating voltage (Ue): 2 ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

Product Overview NXCQ series contactor emergency start device is a product specially designed and developed for fire water supply system, with the function of manual mechanical emergency start fire pump, in line with GB/T50974-2014 "Technical Specification for Fire Water Supply and Fire Hydrant System" for manual mechanical emergency starting.

The main function of OUVT-X3 over-under-voltage tripper: assembled with circuit breaker to achieve over-under-voltage protection Rated working voltage (Ue): AC 230V, 50Hz; Overvoltage action setting value (Uo): 280 (1+5%)V; Undervoltage action setting value: (35%-70%)Ue; Rated insulation ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...