NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment.
It is suitable for grading and cooperating with other series of surge protectors to achieve a cascading protection system, so that the low-voltage power distribution system can be more widely and effectively protected.
Comply with standards: GB/T 18802.1, IEC 61643-1, EN 61643-11, and obtain CQC, CE, CB and other certifications.
Main parameters and technical performance
Technical parameters item | Parameter value | Maximum discharge current | 40kA、60kA、 100kA | Maximum continuous operating voltage | 275VAC、320VAC、 385VAC、 460VAC | Nominal discharge current | 15kA、25kA、 40kA | Voltage protection level | 1.2kV、1.5kV、1.8kV、 2.0kV | Number of poles | 1P、2P、 3P、4P | Connect the wires | ≤16mm | Tighten the torque | 2.0N.m | Ingress protection | IP20 | This article introduces CHINT/CHINT terminal appliances - NU6-II series surge protector products interested, also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
CHINT/CHINT NXAF series universal circuit breaker
NXAF series universal circuit breaker is suitable for AC 50/60Hz, rated working voltage to AC690V, rated working current to 4000A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding and other faults; The break ...
|
|
CHINT/CHINT OVT-X3 overvoltage tripper
Rated working voltage (Ue): AC 230V, 50Hz;
Rated insulation voltage (Ui): 500V;
Overvoltage action setting value (Uo): 280 (1+5%)V;
When the main circuit voltage is 230 (1+5%)V, the trip device should be able to keep the circuit breaker working for a long time. When the main circuit voltage rises ...
|
|
CHINT/CHINT YBLX-WL Series Travel Switch YBLX-WL/CA12
YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program.
Accord with...
|
|
CHINT/CHINT CJ40 Series AC Contactor CJ40-80
CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.
|
|
CHINT/CHINT NBHLE-63 residual current action circuit breaker
NBHLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances.
The product conforms to IEC61009-1, GB/T...
|
|
CHINT/CHINT AC Contactor NC3 Series RT16-32 Fuse
Introduction: CHINT/CHINT AC contactor NC3-09 (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 380V (NC3-09 - 16 can be up to 660V) rated working current to 170A power system to connect and break circuits, and with the appropriate ...
|
|
CHINT/CHINT OVT-1 overvoltage tripper
OVT-1 overvoltage tripper is mainly used for overvoltage protection in lines with AC 50Hz (60Hz) and rated working voltage of 230V.
Ambient temperature: -25°C - +60°C
Relative humidity: ≤95%
Pollution level: Level 3
Altitude:...
|
|
CHINT/CHINT CJX1-K Series Contactors The operating frequency is 1200 hours
Introduction: CJX1-K series AC vacuum contactor (hereinafter referred to as contactor), mainly used for AC 50Hz-60Hz, rated insulation voltage of 1000V, rated working voltage of 380V under the AC-3 use category of rated working current to 820A in the circuit, for long-distance connection and disconnection ...
|
|
CHINT/CHINT OUVT-X1H over/undervoltage tripper
OUVT-X1H over-voltage and under-voltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the terminal voltage of the tripper is reduced to the undervoltage protection range or increased to the overvoltage protection range, the tripper acts and drives the circuit breaker to automatically ...
|
|
CHINT/CHINT switch NXZB/NXZHB series shell frame current 63A
Introduction: NXZB/NXZHB series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 63A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the load circuit ...
|
|
CHINT/CHINT NXB-63H miniature circuit breaker
Rated current (In): 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A
Rated working voltage (U): 230V-(1P, 1P+N), 400V-(2P-4P, 3P+N);
Rated insulation voltage (Ui): 500V;
Frequency: 50Hz
Electromagnetic tripping ...
|
|
CHINT/CHINT OUVT-1 over/undervoltage tripper
OUVT-1 over- and under-voltage trippers are mainly used for over- and under-voltage protection with NB1 and NB1L series circuit breakers in lines with AC 50Hz rated working voltage of 230V.
Basic parameters
Rated operating voltage Ue: 230V AC
Key performance indicators
1. Action characteristics: overvoltage action setting ...
|
|
CHINT/CHINT YBLX-ME series travel switch
YBLX-ME series travel switch is suitable for AC 50Hz or 60Hz, voltage 380V, DC voltage 220V control circuit, for the travel control of the moving mechanism, the change of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program.
Symbol...
|
|
CHINT/CHINT CJ40 Series AC Contactor CJ40-63-250
CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.
|
|
CHINT/CHINT NXC Series AC Contactor NXC-09M
The new NXC series of AC contactors is an innovative and compact design. It is mainly used to start and control AC motors frequently, turn on and break circuits at long distances, and can form electromagnetic starters with appropriate thermal overload relays.
●Conform to the standard: GB/T 14048.1/IEC 6094 ...
|
|
CHINT/CHINT Terminal Appliance —NH3-63 Disconnector
NH3-63 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage 230V, rated current to 63A resistance circuit, mainly for no load to turn on or off the circuit, for the line and power supply to be connected or isolated. It is especially suitable for effective isolation of power supply during line maintenance ...
|
|
CHINT/CHINT CJX1-K series AC vacuum contactor
CJX1-K series AC vacuum contactor (hereinafter referred to as contactor), mainly used for AC 50Hz-60Hz, rated insulation voltage of 1000V, rated working current to 820A under the AC-3 use category of rated working voltage of 380V, for long-distance connection and breaking of the circuit ...
|
|
CHINT/CHINT NM1B series plastic shell circuit breaker NM1B-250S
The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...
|
|
CHINT/CHINT Terminal Block-JXB Series
JXB series terminal blocks are used for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage to 800V, and rated cross-sectional area of 2.5-70mm2. It is installed on TH35 rails.
Comply with standards: GB/T 14048.7, IEC 60947-7-1.
This article describes ...
|
|
CHINT/CHINT NM10 series plastic case circuit breaker
NM10 series plastic shell circuit breaker (hereinafter referred to as circuit breaker) is mainly suitable for infrequent operation of AC 50Hz, rated working voltage to 380V, rated current to 600A in the distribution network circuit, used to distribute electric energy and protect lines and power equipment from overload, short circuit, under...
|
|