CHINT/CHINT Miniature Circuit Breaker NXB-40 has a mechanical life of 20,000 times

JCUK series is suitable for wire connection in circuits with AC 50Hz or 60Hz, rated voltage to 1000V and rated cross-sectional area to 150mm2. It is installed on TH35 rails. Comply with standards: GB/T 14048.7, IEC 60947-7-1. This article introduces the CHINT/CHINT Terminal Blocks - ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

Introduction: CHINT/CHINT NTNC2 series AC contactor AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz or 60Hz, rated working voltage to 690V, rated working current to 800A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate ...

NX30 series open/concealed distribution box (box) (hereinafter referred to as the box) is a device suitable for installing 9mm modulus terminal electrical components, it has the characteristics of using electrical size modularization, installation rail, artistic appearance, safety of use, etc., it is suitable for AC 50 ...

LW6 series universal transfer switch is mainly suitable for control and conversion circuits in machine tool control circuits with AC 50Hz or 60Hz, voltage to 380V and DC voltage to 220V. It can also be used for the conversion of control circuits in other occasions, such as electromagnetic coils, electrical measuring instruments, etc. Standards: GB ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

Introduction: NSC1 series motion controller has 2 communication ports, 1 RS232, 1 RS485; Two or four single-phase high-speed pulse counting, up to 200KHz respectively, one or two AB phase high-speed pulse counting, up to 200KHz; External real-time clock chip is used to make the clock more accurate; ...

NBHLE-40Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 240V, rated current to 40A in the line, play the role of overload, short circuit and leakage protection, can also be used as the line under normal conditions for infrequent on/off use. The product conforms to IEC61009-1, GB/T 1691 ...

The TD series is suitable for connecting wires in power and control circuits with AC 50Hz or 60Hz, rated voltage up to 660V, and rated current up to 200A. This series of terminal blocks are connected by screw crimping, and the wire end must be crimped with the TU type or TO type end before it can be connected with the terminal block. Pick up...

NB8-63M single magnetic circuit breaker is mainly suitable for AC 50Hz, rated voltage to 415V, rated current to 63A in commercial office buildings, civil residential and general industrial use of terminal distribution lines, to provide short circuit protection for the line, but also under normal circumstances to the line infrequent conversion operation...

NB1LE-63□ residual current action circuit breaker is suitable for AC 50Hz, rated voltage unipolar two-wire, two-pole 230V, three-pole, three-pole four-wire, four-pole 400V, rated current up to 63A. When a person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can ...

NB1G-63 miniature circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage 230V, rated current to 63A in the line, the line plays the role of overload short circuit and overvoltage protection, can also be used as the line infrequent operation conversion. Standards: GB ...

HZ5 series combination switch is mainly used for AC 50Hz or 60Hz, voltage 380V and below electrical circuits as power switch and cage induction motor starting, commutation, variable speed switch, can also be used for control line switching. Comply with standards: GB/T 14048.3, IEC 60947-3. ...

NBH-80 miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current 80A in household and similar places of the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnected line for line and equipment maintenance...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NM8N series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, and DC system rated voltage of DC1000V and below, rated current of 16A to 1600A circuit for switching, breaking and carrying rated current, and can be used in the line and electrical equipment...

DZ47LE series residual current action circuit breaker is suitable for AC 50Hz, rated voltage single pole two wires, two poles 230V, three poles, three poles four wires, four poles 400V, rated current to 60A in the line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can ...

Introduction: NVF3M series mini inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, overload capacity...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...