CHINT/CHINT YBLX-WL series travel switch

OUVR-1 self-resettable over-under-voltage protector is a new type of intelligent protection electrical appliances, the product adopts modular standard design, when the power supply line has overvoltage and undervoltage, the protector can quickly and safely cut off the circuit under the continuous high-voltage impact, so as to avoid abnormal voltage sent into the terminal electrical appliances caused by ...

Introduction: PC-UPS series uninterruptible power supply is a backup UPS model specially developed for computer loads. It is mainly composed of charging module, battery pack, inverter module and conversion device and other modules, when the mains is normal, it provides a straight-through mains or tap transformer to the load and slightly stabilized the voltage.

AX-6 auxiliary contact is mainly used in AC 50Hz, rated heating current to 6A, rated voltage to 415V or DC rated voltage to 130V line, which is assembled with NB1 series circuit breaker for signal indication of long-distance circuit breaker on/off. Standards: GB/T 14048.5, IEC 6094 ...

The TB series is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage up to 600V and rated current up to 100A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Comply with the standard ...

NL1E-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

TC is suitable for connecting wires in circuits with AC 50Hz or 60Hz, rated voltage to 600V, and rated current to 600A. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. Screw mounting. Standards: ...

NBH-100□GQ series miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V or 400V, rated current to 100A line to play overload and short circuit protection. At the same time, as an over- and under-voltage protection circuit breaker, it can realize the automatic disconnection protection of over- and under-voltage, and automatically ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NH5-125 disconnector is mainly suitable for AC 50Hz, rated voltage to 400V, rated current 125A and below in the power distribution and control circuit, mainly as the main switch in the terminal combination electrical appliances, can also be used for infrequent control of various low-power electrical appliances and lighting, widely used in industrial and mining ...

NU6-II. series surge protector is suitable for AC 50Hz, rated voltage of single-phase 230V/three-phase 400V power distribution and control system, to meet the SPDII. level test, used to suppress the transient overvoltage below the equipment withstand impulse overvoltage, discharge surge energy, so as to protect the system circuit and equipment. Suitable...

Introduction: CHINT/CHINT Miniature Circuit Breaker NXB-40 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters Forehead...

Introduction: CHINT/CHINT AC contactor CJX2 series (hereinafter referred to as contactor) is mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in the AC-3, 400 (380) V use category rated working current to 95A circuit, for long-distance connection and breaking of circuits, frequency ...

NXBFLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on and off under normal circumstances. The product conforms to IEC61009-1, GB/T...

The NC5 series AC contactors are primarily used at AC 50Hz (or 60Hz) and are rated for operating voltage up to 690V at AC-3/400(380)V Circuits rated up to 630A in the use category for long-distance switching on and off circuits, and with appropriate thermal overload relays...

NBHLE-63Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T 1691 ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

SHT-X3H shunt trip device is suitable for AC rated voltage to 400V or DC rated voltage 48V in the line, and NBH-125 series circuit breaker is used together, when the tripper terminal is connected to the rated control voltage, the trip device action and drive the circuit breaker to break automatically, so as to achieve long-distance control breaking.

Introduction: CHINT/CHINT contactor NC11 is mainly used in the meter box to control the power supply system of the meter: under normal circumstances, the main contact of the contactor is kept on (that is, the main contact is normally closed at four poles, and one of the poles is used for the protection of the user's neutral line short circuit), only when the user owes ...

NBHLE-63 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.