Turck's flow sensors are based on the heat exchange principle

Turck has added a new member to its IO-link junction box portfolio with 16 universal channels (digital input or output). Turck presents a new I/O junction box with 16 universal channels.

High measurement accuracy, compact structure, small size, light weight, good sealing performance, good durability and good long-term stability. The structure of the elastomer is simple, and the output symmetry is good. The natural frequency is high and the dynamic response is good, which is conducive to dynamic measurement. Insensitive to oscillations ...

In modern industrial production, especially in the process of automated production, it is necessary to use various sensors to monitor various parameters in the production process, so that the equipment is in normal or optimal condition, so that the product can reach the best quality. Therefore, it can be said that if there are many excellent sensors, modern ...

1. Attenuation of detection distance. The slip warp is made of iron, which is suitable for inductive sensor detection; The scale of the measured part of the slippery warp is slightly smaller than the scale of the standard test object, so there will be a certain attenuation. 2. On-site anti-disturbance ...

(1) Whether the temperature of the measured target needs to be recorded, alarmed and automatically controlled, and whether it needs to be measured and transmitted at a distance. (2) The size and accuracy of the temperature measurement range. (3) Whether the size of the temperature measuring element is appropriate. (4) When the temperature of the measured target changes with time, the temperature measuring element lags behind ...

A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function connection through the potentiometer element. In order to achieve the purpose of measuring displacement, the potentiometer must require a confirmed link between the change in displacement and the change in resistance. So so...

On March 19, 2021, the 2021 CAIMRS and Annual Selection and Awards Ceremony of China's Production Digital Service Summit hosted by Industrial Control Network was held in the form of real-time live broadcast in the cloud, and the results of the 19th Automation and Digitalization Annual Selection were released. Turck has once again been named one of the "Top 10 Companies of the Year".

Choose a modular principle instead of a static line Turck's compact IP67 marginal controllers or block I/O modules enable distributed control of logistics plant processes. These autonomous modules can be used via Profinet, Ethernet/IP or Modbus TCP with multiprotocol Ethernet ...

** is the pressure, the transmitter can't lose it. In this case, look at the pressure connector to see if it leaks or is clogged, if it admits not, look at the wiring and see if the power supply is normal, simple pressure to determine if the output has changed, or if there is an output at the zero point of the sensor, ...

How Turck's proximity switches work The proximity switch has stable performance, and there is a sensitive adjuster at the tail, which can effectively adjust the distance according to the size. Stability, long detection distance. There are buried and non-embedded. When an object moves towards the proximity switch and approaches to a certain distance, there is a "sense" ...

The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...

Since September 2020, Turck has expanded its portfolio of general-purpose products to include 2-wire general-purpose inductive sensors. Since the introduction of the universal 3-wire product, the general-purpose product family has been greatly developed, and the product is now used in various types of customers. Pass...

1) There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system proximity switch is divided into NPN type and PNP type, and their wiring is different 2) The wiring of the two-wire proximity switch is relatively simple, and the proximity switch can be connected to the power supply after being connected to the load in series. 3) Three-wire proximity switch ...

1. The equipment itself generally does not need daily maintenance, in the event of obvious problems, please do not open it for self-repair, and contact the manufacturer as soon as possible! 2. In principle, the electrode should be calibrated before each measurement, and the electrode should be calibrated regularly for long-term use. ...

(1) Long detection intervals If the detection interval of more than 10 m is maintained in the through-beam type, other inspection methods (magnetic, ultrasonic, etc.) can be completed. (2) There are few constraints on the detected object Because with ...

Torque sensors are able to convert the physical change of torque into accurate electrical signals, which are mainly used in the power range, and have the characteristics of long service life, high accuracy and strong reliability. Torque sensors are not common in our daily lives, but their use is very important. Currently, the twist ...

1. Devices in static water (deep wells, pools, liquid irrigation, etc.) 1. When measuring the stop fluid level in the open container, put the liquid level transmitter vertically into the bottom of the container, and fix the cable connecting the transmitter and the junction box at the opening of the container. 2. When the medium is viscous ...

1) Pay attention to the structure and data of the object to be measured, and the general laser displacement sensor needs to measure the triangular optical path with intact requirements. If the measured object has deep grooves or messy appearance, it may cause the triangular light path to be occluded, so that it cannot be measured. There are also some light-absorbing materials, such as black rubber and other materials, most of the light intensity will be ...

Turck's BI1 series of inductive sensors uses a wear-free and touch-free planning method to detect metal objects. Because of its special multi-coil planning, it has quite a few advantages. They have large detection intervals, a great degree of rig freedom and operational reliability, and then further ...

Modularity will win over the field of mechanical engineering, but it is fully in line with expectations and reasonable. Other occupations may have successfully transitioned from craft production to continuous production. In the case of continuous production, the power can be increased through large-scale production. The monotonous process will be automated, so that the employee ...