A few days ago, Eaton Explosion-Proof Electric released the 2020 new generation of embedded LED explosion-proof lamps - HRL lighting series, which saves more than 50% of cost and energy consumption compared with traditional lamps, strongly contributes to working condition safety, reduces the risk of factory shutdown, and escorts safe production.
Whether it is in an extreme temperature environment, it is necessary to ensure the continuity of lighting; is still in the working condition, the lamp needs to be switched on and off frequently; or the presence of flammable vapors, gases, dusts, fibers or flying flakes under working conditions; Even in humid and corrosive environments such as ships and ports, the new HRL LED explosion-proof lights are the answer. Compared with traditional lamps and lanterns, such as explosion-proof fluorescent lamps and explosion-proof HID lamps, explosion-proof LEDs have been widely used in dangerous and harsh industrial environments due to their excellent color rendering optical performance, high energy saving rate, long life, and green environmental protection.
Eaton's explosion-proof electrical HRL series LED explosion-proof lamps are suitable for marine and offshore applications, extreme temperature environments (standard configuration: -40°C - +55°C) and harsh explosion-proof areas, with a luminous efficiency of more than 100Lm/W, which can not only provide soft, bright lighting, but also have outstanding performance in energy saving and emission reduction, providing customers with an excellent lighting experience. In the same room, under the same illumination requirements, the required LED lamps can save 50% of electricity compared with traditional fluorescent lamps, ensuring the safety of customers' assets, personnel and the environment, while helping customers achieve "open source and reduce expenditure". In addition to the HRL Explosion Protection Series, Eaton Explosion Protection Electric also launched the same HRLN for Class I, Zone 2 and MRL lighting fixtures for non-explosion areas.
From the comparison of typical indoor illuminance in the above graph, it can be seen from the illuminance simulation calculation that the use of HRL LED lighting not only reduces the amount of light consumed by 50%, but also reduces the power consumption by nearly 65%, and the illuminance uniformity is also better, and the average illuminance value is also increased by 17%. Depending on the customer's luminaire needs, Eaton Explosion Proof can provide illuminance design to ensure the right lighting solution. For different places, different areas and spaces, Eaton explosion-proof electric launched the HRL series has three size configurations, 300x600mm, 300x1200mm and 600x600mm, which can be suitable for different ceiling types, customers can choose the appropriate configuration according to the specific working conditions, and the design of the T-shaped mounting bracket makes the installation extremely simple, which can greatly reduce the installation time and cost.
Different regions and countries have different certification requirements for products, Eaton's explosion-proof electrical HRL series LED lights have passed GB, IECEx and ATEX certifications, and have good waterproof and dustproof protection capabilities, and the protection level reaches IP66.
At the same time, to meet the SOLAS Convention B0 &B15 fire protection standards, customers can choose the right lamps according to the fire protection area division, so as to effectively reduce the cost of using B15 standard lamps in the B0 area. In the 2010 International Code for the Application of Fire Test Procedures, the B0 and B15 standards refer to Class "A", "B" or "F" class separations when insulation is required for e.g. decks, bulkheads, doors, ceilings, liners, windows, fire gates, pipe penetrations and cable penetrations. Class "B" separation, including Class "B" gates, the average temperature rise of the measured backfire surface shall not exceed 140°C and the temperature rise recorded by any one thermocouple shall not exceed 225°C within the following time specified for each class: Class B-15 = 15 min; Class B-0=0 min.
Eaton Explosion-Proof Electric has been focusing on the dangerous and harsh environments such as oil and gas, chemical industry, offshore engineering, coal mining, power plants and catering and pharmaceutical industries, providing them with safe, efficient and comprehensive explosion-proof electrical solutions, including: explosion-proof/industrial lighting, explosion-proof power distribution systems, pipe fittings and cable management solutions, MTL instrumentation, signaling, alarm, communication and monitoring equipment, etc. Always adhere to technological innovation, use a higher level of subdivision of industries and professional technology, to create efficient and distinctive solutions for more explosion-proof working conditions. The HRL series LED lamps released this time not only pay attention to the property and life safety in the explosion-proof field, but also meet the requirements of energy conservation and environmental protection, helping various industries to prevent and control safety and build a better future.
Eaton's explosion-proof electrical safety you can count on.
|
More on that
|
Eaton China Wins "2022 Corporate Green Development Contribution Award" from Shanghai Daily
Eaton (NYSE: ETN), an intelligent power management company, has been awarded the Corporate Green Development Contribution Award in the 2022 Environmental, Social and Governance (ESG) Leaders Awards by Shanghai Daily for its outstanding contributions to China's energy transition.
Eaton...
|
|
Eaton Corporation announced a strategic alliance with KPIT to develop next-generation electric vehicle technology
Shanghai, China – On August 13, 2019, Eaton, a global power management company, announced that it has partnered with KPIT, a global technology company, to develop next-generation electric vehicle technology for Eaton's eMobility vehicle electrification business.
Eaton's partnership with KPIT will initially focus on ...
|
|
Eaton named Fortune World's Most Admired Companies for the Fifth Consecutive Year
SHANGHAI, China — Eaton, an intelligent power management company, was named to Fortune magazine's annual list of the World's Most Admired Companies for the fifth consecutive year.
"We are honored to once again be recognized as one of the World's Most Admired Companies," said Eaton.
|
|
Eaton's PL9 miniature circuit breaker builds a "firewall" for electrical safety
As a core element of Eaton's terminal power distribution solution, the PL9 miniature circuit breaker adds arc protection through a product matrix of residual current circuit breakers, surge protection, arc fault protectors and fail-safe over- and under-voltage protectors, helping customers to meet the needs of today's increasingly complex power consumption
|
|
Interference and treatment methods of frequency converters
Methods to eliminate common-mode interference include:
1. Shielded twisted pair wire is used and effectively grounded.
2. Where there is a strong electric field, galvanized pipe shielding should also be considered.
3. Keep away from high-voltage wires when wiring, and do not bundle high-voltage power cables and signal wires together.
4 Don't share the same ...
|
|
Eaton and EN+ have entered into a strategic partnership to deepen the field of charging infrastructure
In September 2022, Eaton (NYSE:ETN), a global power management company, successfully completed a strategic investment in Shenzhen Epulus Technology Co., Ltd. (EN+ Technology), a well-known global provider of charging equipment and operating platforms in China.
In the face of this merger...
|
|
Big difference at the moment of truth! One picture to understand Eaton's Y22 series pushbutton switches
Change the direction of logistics transmission,
Select switch head for easy guidance;
When you encounter an accident in an elevator,
The emergency stop switch is a life-saving button;
five-color industrial indicator light,
Clearly convey every sound of the device. …
The button is a small switch, and it has a big effect at the critical moment
Eaton Y22 Series Push-to-open ...
|
|
Eaton's E-Cube Gen II creates a new future of green and efficient data centers
If we compare the network to a pipe, and data to a stream of water, with the advent of the era of data explosion, the pipeline is getting wider and wider, and the water flow is getting bigger and bigger; On the other hand, a large number of use scenarios require local water intake and water storage, and how can the data center as a reservoir continue to provide a solid guarantee, ...
|
|
Eaton's new HPLN series of explosion-proof LED lighting escorts to ensure safe and stable production in extreme environments
LED lighting has become a mainstream product in the market because of its excellent characteristics such as high efficiency, energy saving and environmental protection. Eaton Explosion-proof Electric keeps up with market changes and responds to customer needs, and has been committed to R&D and manufacturing a series of LED solutions that can be used in explosion-proof and industrial fields in recent years.
|
|
How Eaton UPS is maintained
How Eaton UPS is maintained
1. How to maintain Eaton UPS?
(1) Under normal conditions, the battery should be charged and discharged every 3-6 months, and the charging time of the standard machine should be more than 10 hours after discharge.
(2) It should be charged once every 3-6 months after a long period of idleness.
3. Charge ...
|
|
Eaton and Trina have reached a strategic partnership to win the new energy track with smart photovoltaics
On February 16, 2023, Eaton (China) Investment Co., Ltd. (hereinafter referred to as "Eaton") and Jiangsu Trina Smart Distributed Energy Co., Ltd. (hereinafter referred to as "Trina Smart") signed a strategic cooperation agreement in Shanghai.
Eaton Electric Group Asia Pacific Distribution Systems & Services ...
|
|
Eaton won the highest award of "COMAC 2019 Excellent Supplier".
Shanghai, China – On October 22, 2020, Eaton Shanghai (Shanghai) Aviation Pipeline Manufacturing Co., Ltd. (Eaton Shanghai) was awarded the highest award of "COMAC 2019 Excellent Supplier".
|
|
For the 15th consecutive year, Eaton has been named to the Top 100 Best Corporate Citizens
CLEVELAND, United States — Eaton (NYSE: ETN), a global power management company, has been named to 3BL Media's Top 100 Best Corporate Citizens list for the 15th consecutive year. The list ranks companies in the Russell 1000 Index to recognize those who have demonstrated a strong track record in environmental, social and governance ( ...
|
|
Eaton Electric and Huanyu Group held an unveiling ceremony for the joint venture to jointly build a new ecology of low-voltage electrical services
On March 30, 2021, Huanyu Group and Eaton Electric Group held an unveiling ceremony for the joint venture company Huanyu Hi-Tech Co., Ltd. (hereinafter referred to as "Huanyu Hi-Tech") in Yueqing City, Zhejiang Province, officially establishing a strategic cooperative relationship between the two sides. Wang Xunxing, Chairman of the Board of Directors of Huanyu Group, Yi ...
|
|
Selection and tuning of circuit breakers
The selection of circuit breakers should be based on the specific use conditions to select the use category, select the rated working voltage, rated current, tripper setting current and other parameters, refer to the protection characteristic curve provided by the product sample to select the protection characteristics, and need to verify the short-circuit characteristics and sensitivity coefficient.
Break...
|
|
Sensitivity of the circuit breaker
In order to ensure that the instantaneous or short-delay overcurrent trip of the circuit breaker can operate reliably in the event of a slight short-circuit fault within its protection range under the small operation mode of the system. The sensitivity of circuit breaker protection must meet the requirements of the "Design Code for Low-Voltage Power Distribution" (GB50054-2011).
|
|
On March 24, 2023, Eaton Power (Shanghai) Co., Ltd. (hereinafter referred to as Eaton) and Blue Hall Yunjing (Beijing) Technology Co., Ltd.
On March 24, 2023, Eaton Power (Shanghai) Co., Ltd. (hereinafter referred to as Eaton) signed a strategic cooperation agreement with Blue Hall Cloudview (Beijing) Technology Co., Ltd. (hereinafter referred to as Blue Hall) in Beijing. The two parties will jointly build a data center with artificial intelligence computing power as the core to accelerate ...
|
|
Eaton's CEO Releases 100th Anniversary Open Letter: Committed to Innovation, the Future Looks Bright
2023 marks the 100th anniversary of Eaton's (ETN) listing on the New York Stock Exchange. At this momentous moment, Craig Amold, chairman and chief executive officer, released an open letter in which he reflected on Eaton's 100-year history and said:
Eaton's employees have forged ...
|
|
The difference between circuit breaker and air open
1. The air switch generally plays the role of "isolation" and "protection device" in the small current circuit, which is also called automatic switch and air circuit breaker.
2. The circuit breaker has a good arc extinguishing ability, and will automatically trip in the case of short circuit and high current; In high-voltage, high-current circuits ...
|
|
Two of Eaton's factories were awarded "Green Factories" to accelerate their sustainability goals!
Recently, Eaton's Pingdingshan plant and Changzhou plant were awarded the honorary titles of "Henan Green Factory" and "Changzhou Green Factory" respectively. This is the practical result of Eaton's in-depth implementation of the "carbon neutrality" goal in China.
In order to promote the green and low-carbon development of industry, the Ministry of Industry and Information Technology (MIIT) has launched a policy since 2017.
|
|
Contact
working hours
