SMC filter element is an indispensable device in the pipeline system of conveying media. The Y-type filter is a small device that removes less solid particles from the liquid, which can protect the normal operation of the equipment. When the fluid enters the cartridge with a certain gauge screen, the bullying is blocked and the clean filtrate is discharged from the filter outlet. When it needs to be cleaned, just take out the removable filter cartridge and reinstall it after treatment, which is more convenient to use and maintain.
The air filter filters the dust in the air through a variety of dust removal methods such as cyclone, oil bubble, oil film, filter, etc., which has the advantages of low noise, high filtration efficiency and low resistance.
Use and maintenance.
The filter should be matched with an air compressor with the corresponding discharge volume for suction filtration.
The filter should be installed vertically and a protective net should be installed to prevent vibration.
The oil in the filter should be the same brand as the lubricating oil of the air compressor, and oil is not allowed when the machine is running.
The oil level clearance value is based on static, and the oil level can be appropriately increased during seasonal operation, and the oil curtain can be kept simple inside.
When the filter is put into use for the first time or after cleaning, it must be evenly poured with oil on the screen.
Filter - generally after 2000-3000 hours of operation, the oil should be changed and cleaned, depending on the dust accumulation.
Low noise. The Ministry of Environmental Protection determined that the noise of the suction port was 80.6dB (a) when using the oil-immersed air filter, which was lower than *<工业企业噪声卫生标准>, which reduced the noise of the unit in the mechanical room and improved the working environment and was conducive to the health of employees.
The filtration effect is good. After 4 months of operation, the press was dismantled and inspected, and the suction and exhaust unit was almost invisible to dust, and the filtration efficiency was 98%.
|
More on that
|
What is the function of the (air) buffer valve of the cylinder?
A buffer valve is a valve that adjusts the release flow of the enclosed gas when absorbing the kinetic energy generated at the end of the stroke.
Before the end of the stroke, the contact between the buffer sleeve and the buffer seal causes the exhaust to be sealed, the pressure rises, and the shock is absorbed.
The compressed air on the exhaust side of the rising pressure passes through the ...
|
|
Discover the future of baking automation—SMC
Who doesn't love bread with its sweetness?
Soft and chewy mouthfeel, with a unique wheat aroma,
It's irresistible to its charm. Today we will bring it to you
SMC's automation proposal for the baking industry.
Baking process: from ingredient handling, mixing and stirring ...
|
|
2. Can the cylinders of this (or more) be operated at the same time? —SMC
It is difficult to control two (or more) cylinders at the same time with one valve. The reason for this is that even if the piping conditions are the same, the friction of each cylinder seal and the friction of the guide rod are different, so it is not possible to operate synchronously.
Even if piping conditions and load are equal, speed regulation is adjusted, etc.
|
|
SMC Pneumatic Knowledge Lecture Hall - Air Source Treatment
What products are available for compressed air treatment
What kind of pollutants are in the air?
When it comes to the composition of the air, please look up at the sky, is the sky like rain, fog and wind? That's right, what forms such a beautiful scenery is the official so-called "haze", which for us is a small solid particle.
Yes...
|
|
SMC's solutions dominate at the Tire Technology Fair in Hannover
SMC will once again be leading the way at this year's Tire Technology Fair Hannover, where the global provider of pneumatic and electrical automation solutions will present its innovative component kit.
At Messe Germany, Hall 21, Booth 9064, SMC will be presenting a series of ...
|
|
SMC in Japan achieved sales growth driven by demand from the semiconductor industry
Japan's SMC announced on April 23 that its consolidated net profit for fiscal 2020 (ending March 2021) increased by 10% year-on-year to 121 billion yen. The previous forecast was a 5% decrease in net income to 105 billion yen, but this time it was raised by 16 billion yen to achieve profit growth. Thanks to 5G...
|
|
New Product Feature—Digital Flow Sensor PF2MC7□(-L) Series
SMC has launched a new 3-color 3-screen digital flow sensor PF2MC7□(-L) series, which can measure a wide flow range with a flow range ratio of 100:1 and a minimum setting range of 1L/min. In addition, it supports IO-Link※ communication protocol, and through process data, it is easy to grasp the flow rate.
|
|
SMC Tianjin Plant held a groundbreaking ceremony
On August 18, SMC Tianjin Factory held a groundbreaking ceremony, which was attended by Feng Weihua, Secretary of Tianjin Beichen District Party Committee, Li Hongdong, Member of the Standing Committee of the District Party Committee and Director of the Office of the District Party Committee, Pang Lei, Deputy District Mayor, and leaders of Beichen Development Zone and other leaders attended the groundbreaking ceremony and inspected SMC Tianjin Factory.
Ma Qinghai, General Manager of SMC China, SMC ...
|
|
Installation method of SMC glass water tank
SMC FRP water tank is a kind of water tank suitable for various industrial, civil building water supply, HVAC and other industries, which is characterized by smooth surface, no cracks, and no bubbles in the weld. FRP water tank refers to the water tank processed from FRP as raw material. So how to install the SMC glass water tank?
SMC Glass ...
|
|
Advantages of Compression Molded SMC Mold Oil Heating System
Compression forming molds usually use a hydraulic press, and the upper and lower parts of the mold are fixed on the press. The mold consists of a cavity core, which is the same as an injection mold. The tryout material is placed on the open mold and the press is turned off. The set temperature and the pressure generated by the press melt the raw material into the mold ...
|
|
Focus on food safety and contribute to sustainable development
In order to help the sustainable development of future-oriented food enterprises, SMC has been constantly innovating, and recently brought a wave of energy-saving, safe, clean and durable products, especially HF series products and solutions.
With the continuous upgrading of industrial intelligent manufacturing, in the food production and processing ...
|
|
SMC Compact 5-Port Solenoid Valve Plug-in JSY1000/3000/5000
The flow rate is increased, and the size is reduced.
Space-saving, lightweight, and large flow.
Power consumption: 0.1 W (model with power-saving circuit*), 0.4 W (standard)
※Customized specifications
Plug-in connection with the cartridge
Available with 4-position double 3-way valves
Container base model: JJ5SY1, JJ5SY3, JJ5S...
|
|
What is the difference between a magnetically coupled rodless cylinder and a mechanically jointed rodless cylinder? – SMC cylinders
The connection method of the slider (external mover) is different.
●Mechanical bonding type (MY series)
Mechanical engagement type (MY series) refers to the opening of a part of the cylinder barrel, and the external slider and piston engagement action. The incision part is made with a sealing tape, which is sealed from the inside and constitutes a ...
|
|
A brief introduction and precautions for SMC cylinders
The SMC standard cylinder is a pneumatic actuator that converts the pressure energy of a compressed gas into mechanical energy. There are two common types: reciprocating linear motion and reciprocating oscillation, which are widely used in printing, semiconductors, automatic control, robots, etc. The following is a brief introduction to the SMC cylinder block.
SMC Standard Gas ...
|
|
SMC FAQ – What is the difference between metal seal and elastomeric seal for solenoid valves?
■Metal sealing method
・High durability and longer life
・A small amount of air leakage occurs in the gap between the sliding surfaces
・The inflow of fine particles and foreign matter can cause the pilot spool to become stuck
・Low actuation force, suitable for high-speed and high-frequency actuation
■Elastic sealing method
・Low air leakage
・ Liquid foreign matter, oil ...
|
|
SMC solenoid valve is a maintenance method
Although the cost of SMC solenoid valve is low, if we don't maintain it and can't make full use of it, it will be a loss for the user. How to maintain the SMC solenoid valve?
The SMC solenoid valve has a closed cavity. There are through-holes in different locations. Each hole leads to a different oil ...
|
|
In the online product catalog on the SMC website, some products have a number such as "10-" or "25A-" in front of the series, what does it mean?
"10-" means to support clean/low dust emission, and "25A-" means to support secondary battery production equipment, both of which are quasi-standard products. Please inquire separately about the contents and specifications of the numbers at the front of the product lineup. And please note: products with a pre-catalog number (two digits) are limited to the relevant ...
|
|
SMC launches the new SFDA series of sterilizing filters
SMC has launched a new series of sterilizing filters for the food industry with bacterial trapping performance, with LRV*1≥9 bacterial trapping performance, 0.01 μm filtration accuracy (99.99% capture efficiency), and materials that comply with the FDA/Japan Food Sanitation Act*2, making it suitable for food manufacturing and food packaging.
|
|
SMC New Product Feature丨Pulse Valve JSXF/JSXFA Series
SMC has launched a new series of pulse valves for dust collectors, the JSXF/JSXFA series, which has a one-piece structure made of high-strength elastic material for the valve body and diaphragm, and has increased the product life to more than 10 million cycles*.
SMC has launched a new pulse valve for dust collector JSXF/JSXFA series, valve body and membrane ...
|
|
New Product Feature丨Wireless Communication System EXW1/EX600-W Series
SMC has launched a new compact and lightweight wireless communication system EXW1 series, which has increased the communication distance to 100m, uses 2.4 GHz ISM frequency bandwidth and frequency hopping technology, which is highly resistant to interference, in addition to the addition of an external antenna (IP67), even if the basic module/remote module is installed in the control ...
|
|
Contact
working hours
