2. Can the cylinders of this (or more) be operated at the same time? —SMC

The connection method of the slider (external mover) is different. ●Mechanical bonding type (MY series) Mechanical engagement type (MY series) refers to the opening of a part of the cylinder barrel, and the external slider and piston engagement action. The incision part is made with a sealing tape, which is sealed from the inside and constitutes a ...

SMC has launched a new series of pulse valves for dust collectors, the JSXF/JSXFA series, which has a one-piece structure made of high-strength elastic material for the valve body and diaphragm, and has increased the product life to more than 10 million cycles*. SMC has launched a new pulse valve for dust collector JSXF/JSXFA series, valve body and membrane ...

■Metal sealing method ・High durability and longer life ・A small amount of air leakage occurs in the gap between the sliding surfaces ・The inflow of fine particles and foreign matter can cause the pilot spool to become stuck ・Low actuation force, suitable for high-speed and high-frequency actuation ■Elastic sealing method ・Low air leakage ・ Liquid foreign matter, oil ...

Although the cost of SMC solenoid valve is low, if we don't maintain it and can't make full use of it, it will be a loss for the user. How to maintain the SMC solenoid valve? 　　The SMC solenoid valve has a closed cavity. There are through-holes in different locations. Each hole leads to a different oil ...

Compressed air management system When the equipment is detected in a standby state (when production is stopped), the air supply pressure is reduced. Unnecessary air consumption is reduced THE AIR MANAGEMENT SYSTEM REDUCES COMPRESSED AIR CONSUMPTION, MONITORS AND IMPROVES EQUIPMENT OPERATING EFFICIENCY IN REAL TIME Automatic/manual adjustment ...

SMC has launched a new compressed air management system AMS20/30/40/60 series, which can reduce unnecessary air consumption of equipment in the factory, realize the visual management of the status of production equipment, and support various industrial Ethernet and data communication protocols, which is suitable for the compressed air system of the factory. ...

SMC magnetic switch, also known as magnetron, it is similar to the Hall element, but the principle is different, it is a kind of switching element controlled by magnetic field signal, non-magnetic disconnection, can be used to detect the state of circuit or mechanical movement. Precautions for the use of SMC magnetic switches voltage and ...

On July 28, the 11th China Intelligent Manufacturing Summit Forum and the 19th China Intelligent Manufacturing Year-end Inventory Award Ceremony hosted by e-works were held in Hangzhou. SMC was invited to attend the conference and won the "2021 China Industrial Digital Transformation Pilot Enterprise" award. The award is awarded by ...

Japan's SMC announced on April 23 that its consolidated net profit for fiscal 2020 (ending March 2021) increased by 10% year-on-year to 121 billion yen. The previous forecast was a 5% decrease in net income to 105 billion yen, but this time it was raised by 16 billion yen to achieve profit growth. Thanks to 5G...

SMC has launched a new 3-color 3-screen digital flow sensor PF2MC7□(-L) series, which can measure a wide flow range with a flow range ratio of 100:1 and a minimum setting range of 1L/min. In addition, it supports IO-Link※ communication protocol, and through process data, it is easy to grasp the flow rate.

SMC has launched a new 3-way pressure relief valve VHS□-D/VHS□W-D series with keyhole, which meets OSHA (United States Occupational Safety and Health Administration) standards and can prevent accidents caused by accidental gas supply! Its flow characteristics are increased by up to 88%, which can be achieved by reducing the ...

SMC has launched a new series of sterilizing filters for the food industry with bacterial trapping performance, with LRV*1≥9 bacterial trapping performance, 0.01 μm filtration accuracy (99.99% capture efficiency), and materials that comply with the FDA/Japan Food Sanitation Act*2, making it suitable for food manufacturing and food packaging.

A buffer valve is a valve that adjusts the release flow of the enclosed gas when absorbing the kinetic energy generated at the end of the stroke. Before the end of the stroke, the contact between the buffer sleeve and the buffer seal causes the exhaust to be sealed, the pressure rises, and the shock is absorbed. The compressed air on the exhaust side of the rising pressure passes through the ...

SMC has launched a new compact Peltier circulating liquid thermostat HEF series, which uses Peltier components to control the circulating fluid temperature with high precision, which is fluorine-free and environmentally friendly. It is simple to operate and easy to maintain. SMC has launched a new series of small Peltier circulating liquid thermostats HEF, ...

The internal pilot operated solenoid valve uses the pilot pressure to switch the spool and change (control) the flow path. If the pilot pressure does not reach the minimum operating pressure of the switching spool (0.1-0.2MPa: varies depending on the model), the switching will be defective. If you want to use a 5-way solenoid valve at low pressure, you can use ...

SMC High Pressure Coolant Valve SGH series is available in two new high-pressure specifications, 10MPa and 14MPa, which are suitable for various machine tools such as high-speed grinding and deep-hole drilling. SMC High Pressure Coolant Valve SGH Series New 10MPa and 14MPa High Pressure Specifications, Suitable for High-speed Grinding, Deep Hole Drill Bit Machining ...

Visitors to this year's competition will have the opportunity to get a glimpse of SMC's wide range of professional solutions for the life sciences industry. The trade fair was held in Düsseldorf from November 12 to 15 and is a major international market for the medical supplier industry and product development. In Hall 8B ...

SMC filter element is an indispensable device in the pipeline system of conveying media. The Y-type filter is a small device that removes less solid particles from the liquid, which can protect the normal operation of the equipment. When the fluid enters the cartridge with a certain specification screen, the bullying is blocked, and the clean filtrate is removed from the ...

In order to help the sustainable development of future-oriented food enterprises, SMC has been constantly innovating, and recently brought a wave of energy-saving, safe, clean and durable products, especially HF series products and solutions. With the continuous upgrading of industrial intelligent manufacturing, in the food production and processing ...

There are three major industrial drives: pneumatic, electric and hydraulic Among them, pneumatic products are widely used in the field of automated production with their unique advantages: The structure of the product device is simple and lightweight, the output force and working speed are simple to adjust, and it is easy to install and maintain. You see, pneumatic into ...