CHINT/CHINT Thermal Overload Relay NR4 Series Rated current 1.1A

Introduction: JQX-10F small electromagnetic relay 2Z, 3Z two contact forms; Contact switching current up to 10A; AC and DC specifications are complete; It has a working status indication device; A variety of device sockets are available. Product parameters ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

Introduction: NJX2 miniature electromagnetic relay 2Z, 3Z two contact forms; Contact switching current up to 10A; AC and DC specifications are complete; A variety of device sockets are available; It has mechanical locking, power-on indication and mechanical indication functions for selection. ...

Introduction: NJX-13FW relay 2Z, 2ZS, 3ZS, 4ZS four contact forms: no oxidation, zero arcing, long life; The transparent cover is sealed and sealed, waterproof, dustproof and anti-corrosion, and can be used in harsh environments such as low air pressure; AC/DC specifications are complete, and the installation methods are diverse; A variety of sockets are available.

Rated insulation voltage (Ui): 500V; Rated operating current at different rated operating voltages (see Table 1) Usage Category: AC-12, DC-12 Action characteristics: At 70%-10% of the rated control power supply voltage, the tripper should act reliably to disconnect the circuit breaker. Tripper ...

Introduction: CHINT/CHINT miniature electromagnetic relay NJX3 has three contact forms: 1Z, 2Z and 3Z; Small structure, low power consumption, strong carrying capacity and high reliability; Widely used in the HVAC industry, it is used to control condensers, compressors, air conditioners and other equipment, and is the basic element in the air conditioning industry.

NXR series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, voltage to 690V, setting current 0.1-630A long-term work or intermittent operation of AC motor overload and phase failure protection. Thermal relays also feature temperature compensation, action indication, self-...

NBH8-40 □ household circuit breaker is mainly used for AC 50Hz, rated voltage to 230V, rated current to 40A line as overload and short circuit protection of power lines, and can also be used for infrequent switching of electrical devices and power lines under normal circumstances. Standard: GB/T 10963 ...

NJA1-KG relay is mainly used as a timing (alarm clock), switch-on or off-control in the control circuit with AC frequency of 50Hz, rated control power supply voltage to 240V and DC rated control power supply voltage to 240V.

Introduction: CHINT/CHINT small electromagnetic relay NJDC-12 has two contact forms: 2Z and 3Z; The contact switching current can reach 7.5A, and the AC and DC specifications are complete. With test button function, it can be jogged or closed and locked. A variety of device sockets are available. ...

Product Overview NJYW1 series liquid level relay is suitable for automatic control of liquid level in civil water towers, high-level water tanks, underground reservoirs and other occasions in the control circuit of AC 50Hz and rated control power supply voltage to 380V. Automatic water supply or drainage control can be realized according to the user's wiring requirements. ...

Introduction: JSS48A series time relay is suitable for AC 50Hz, rated control power supply voltage to 380V and DC rated control power supply voltage to 240V as a time control element, according to the predetermined time to turn on or off the circuit. ...

NR4 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, rated voltage 690V, 1000V, Overload and phase failure protection of AC motors with current (0.1-180)A for long-term operation or intermittent long-term operation. Thermal relays have phase loss protection, ...

Introduction: NJG1 series solid state relay adopts photoelectric isolation between input and output, one-way thyristor reverse parallel output, zero-crossing conduction, built-in RC absorption loop, MOV protection, epoxy resin potting. Widely used in electric furnace heating constant temperature system, CNC machinery, plastic machinery, food machinery, ...

JZC4 series contactor relay is mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 400V and DC rated voltage to 220V, for switching, breaking and amplifying. Standards: GB/T 14048.5, IEC 6 ...

CHINT/CHINT Terminal Appliances —NXU-II. Surge Protector Main functions: lightning protection and surge protection in the inlet cabinet Conform to the standard: GB/T18802.1 Basic parameters and technical performance indicators (Table 1) Choose the appropriate specifications according to different grounding systems and protection modes. °L-PE/N-PE ...

The NKG1 time-controlled switch is a control element of the time control unit, which can automatically turn on and off the power of various electrical equipment according to the time set by the user. The control object can be street lights, neon lights, advertising sign lights, production equipment, radio and television equipment, etc., all of which need to be turned on regularly.

Introduction: NJS1 series time relay is mainly used as a time control component in the control circuit of AC 50Hz, rated control power supply voltage to 380V and DC rated control power supply voltage to 240V, and the circuit is turned on or off at a predetermined time. ...

NR8 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, voltage to 690V, current 0.1A-630A long-term work or intermittent long-term work of AC motor overload and phase failure protection. The thermal relay also features temperature compensation, action indication, ...

NRE8 series electronic overload relay (hereinafter referred to as the relay) is mainly used in the circuit with AC 50/60Hz, rated working voltage below 690V, and the current is within the range of the setting current calibrated by the casing, for three-phase motor overload and phase failure protection. This relay is an application microcontroller ...