CHINT/CHINT Motor Control & Protection Appliance - NR8 Series Thermal Overload Relay

Introduction: CHINT/CHINT small electromagnetic relay NJDC-12 has two contact forms: 2Z and 3Z; The contact switching current can reach 7.5A, and the AC and DC specifications are complete. With test button function, it can be jogged or closed and locked. A variety of device sockets are available. ...

NXR series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, voltage to 690V, setting current 0.1-630A long-term work or intermittent operation of AC motor overload and phase failure protection. Thermal relays also feature temperature compensation, action indication, self-...

NH9-32 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage to 400V, rated current 32A circuit, mainly used for on-off resistive loads, including appropriate overload, for the purpose of isolating the line from the power supply. The switch can carry the current under normal circuit conditions ...

CHINT/CHINT Terminal Appliances —NXU-II. Surge Protector Main functions: lightning protection and surge protection in the inlet cabinet Conform to the standard: GB/T18802.1 Basic parameters and technical performance indicators (Table 1) Choose the appropriate specifications according to different grounding systems and protection modes. °L-PE/N-PE ...

NBH8-40 □ household circuit breaker is mainly used for AC 50Hz, rated voltage to 230V, rated current to 40A line as overload and short circuit protection of power lines, and can also be used for infrequent switching of electrical devices and power lines under normal circumstances. Standard: GB/T 10963 ...

JR36 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, voltage to 690V, current 0.25-160A long-term work or intermittent long-term work of AC motor overload and phase failure protection. Thermal relays have phase failure protection, temperature compensation, self-...

Introduction: NXRC series contactor relays are mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 380V and DC rated voltage to 220V, for switching, breaking and amplifying. ...

NKG3 series time-controlled switch is mainly used as a time control component in the circuit of AC 50Hz and rated control power supply voltage to 220V and below, which is used to turn on or off the circuit according to the predetermined program, and is used for timing on or off control of street lights, advertising light boxes and other equipment. The main technology ...

Introduction: NJX-13FW relay 2Z, 2ZS, 3ZS, 4ZS four contact forms: no oxidation, zero arcing, long life; The transparent cover is sealed and sealed, waterproof, dustproof and anti-corrosion, and can be used in harsh environments such as low air pressure; AC/DC specifications are complete, and the installation methods are diverse; A variety of sockets are available.

Introduction: NJX2 miniature electromagnetic relay 2Z, 3Z two contact forms; Contact switching current up to 10A; AC and DC specifications are complete; A variety of device sockets are available; It has mechanical locking, power-on indication and mechanical indication functions for selection. ...

Product Overview NJG1 series solid state relay adopts photoelectric isolation between input and output, unidirectional thyristor reverse parallel output, zero-crossing conduction, built-in RC absorption loop, MOV protection, epoxy resin glue. Widely used in electric furnace heating constant temperature system, CNC machinery, plastic machinery, food machine ...

Introduction: NJMC1 pulse relay meets the requirements of GB/T 21711.1 standard; The NJMC1 pulse relay is a mechanical bistable relay that changes the state of the contact by inputting a pulse signal. Therefore, compared with ordinary relays, which have to be continuously energized when the armature is closed, pulse relay appliances ...

JZC4 series contactor relay is mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 400V and DC rated voltage to 220V, for switching, breaking and amplifying. Standards: GB/T 14048.5, IEC 6 ...

Introduction: NJB1-YW liquid level relay is suitable for automatic water level control in industrial facilities and equipment, civil water towers, high-level water tanks, underground reservoirs and other occasions. This product is not suitable for level control of flammable and explosive liquids such as oil, chemical liquids, etc. ...

NH8-125 isolating switch is mainly suitable for AC 50Hz, rated voltage to 415V, rated current 125A and below in the power distribution and control circuit, mainly as the terminal combination electrical appliances in the main switch, can also be used for infrequent control of all kinds of low-power electrical appliances and lighting, widely used in industrial and mining enterprises ...

JZ7 series intermediate relay (hereinafter referred to as the relay) is mainly used in the control circuit of AC 50Hz (can be used for 60Hz after derivation), rated working voltage to 380V or DC rated working voltage to 220V, used to control various electromagnetic coils, so as to expand the signal or transmit the signal to the ...

NR2 series thermal overload relay (hereinafter referred to as thermal relay) is suitable for AC 50Hz/60Hz, voltage to 690V, current (0.1-150)A long-term work or intermittent long-term operation of AC motor overload and phase failure protection. The thermal relay also features temperature compensation, action indication, ...

NR5 series thermal overload relay is suitable for AC 50Hz (or 60Hz), rated working voltage to 690V, working current 0.1-630A long-term work or intermittent long-term work of AC motor overload and phase failure protection, but also has temperature compensation, action indication, automatic ...

The NKG1 time-controlled switch is a control element of the time control unit, which can automatically turn on and off the power of various electrical equipment according to the time set by the user. The control object can be street lights, neon lights, advertising sign lights, production equipment, radio and television equipment, etc., all of which need to be turned on regularly.

Introduction: NXJ series miniature electromagnetic relay 2Z, 3Z, 4Z, 2ZH four contact forms: AC/DC specifications are complete; High contact reliability, can be used for PLC control; Transparent dust cover encapsulation; Equipped with matching sockets; Optionally available with status indicator. ...