Maintenance and teach-in cleaning of Universal Robots

Universal Robots maintenance should be based on actual needs, and the robot teach pendant should be cleaned at an appropriate frequency; Although the panel paint film can withstand the corrosion of most solvents, it should still avoid contact with strong solvents such as acetone; If possible, the robot teach pendant should be removed and placed in ...

In July 2022, the Ministry of Human Resources and Social Security released the second quarter of the "National Recruitment is greater than the "100 Most Lacking Jobs" Ranking of Job Seekers", and "welders" were on the list, ranking fifteenth.

1. After opening the robot main switch, you must first check that the robot is not at the origin position, if not, please manually track the robot back to the origin, it is strictly forbidden to open the robot main switch, and press the start button to start the robot when the robot is not at the origin. 2. After turning on the main switch of the robot ...

Artificial intelligence is increasingly integrated into existing robotics infrastructure; enhancements to 3D machine vision technology; and the potential of cloud robots to enable connected workspaces, are some of the key trends to note in the cobot ecosystem. Shortage of skilled labor for low-value tasks, and ...

First, the size and structure of the robot Industrial robots are usually large, behemoths with high payloads, high precision, and high speed. Collaborative robots, on the other hand, are relatively small and lightweight, usually in the form of robotic arms, with lower load and speed, so they are different from human ...

7. The range of motion of Universal Robots is a complete spherical shape, does it have any blind spots or dead spots? All 6 joints of Universal Robots can be rotated 360° ±, so the workspace is a complete spherical space within the robot's working range. However, it is important to note that the robot is moving to the ...

With the development of 5G and technology, the manufacturing and logistics industries are now preparing to automate supply chain operations and improve the level of Industry 4.0. Here we have to mention the application and help of the industrial robotic arm of collaborative robots in the manufacturing and logistics industries. ...

Cobots are not only able to perform precise processes and pre-defined work processes together repeatedly, but also with minimal deviations during the fulfillment, thus providing favorable conditions for discussion or analysis. This is also an important reason why many manufacturers choose cobots to perform automated quality inspections.

The gripping needs of the robotic arm to confirm the position of each section of the robotic arm First of all, the robotic arm needs a visual servo system to confirm the orientation of the object, which can be divided into two systems: Eye-to-Hand and Eye-in-Hand, according to the relative orientation of the end actuator (hand) and the vision sensor (eye). ...

1. Can Universal Robots actively run programs after they are turned on? How? Under normal circumstances, Universal Robots boot to run the program, and the following processes need to be completed: startup, initialization of the robot (on, start), loading of the program, startup of the program, return to the starting point (active), ...

1. Optical tactile sensor There are two types of optical tactile sensors: inside and outside. In this type, the intensity of the light is adjusted by moving the obstacle to the light path. It has the advantage of being immune to electromagnetic interference and has a high resolution. Low wiring is required and the electronics can be kept away from the sensor. ...

Universal Robots are equipped with AGV applications Intelligent scheduling: Combined with the automatic map construction and navigation characteristics of the mobile trolley, the UR robot can realize the material grabbing and logistics transmission of the mobile trolley in a large space. Low power consumption: The low power consumption of the UR robot makes the mobile car ...

1. The six-axis robot of materials should be operated by specially trained personnel and maintained by special personnel. 2. The main moving pair of the six-axis joint robot should be well lubricated. For the lead screw pair and rolling guide shaft pair, if lubricating grease is applied, lubricating oil will be added every week according to the use of the ...

1. Confirmed sensing: The robot can flexibly set the working position in all directions of the working radius, and after confirming to +0.1mm, it can accurately perceive the position of the material, grab it and put it in the specified position 2. Simple operation: Chinese man-machine interface, the operator can easily change the parameters and select the program...

Types of cobot sensors: 1. Two-dimensional vision sensor The two-dimensional vision sensor is mainly a camera, which can complete the detection and positioning of object movement.

Brief introduction: Heemskerk is a medium-sized, high-precision component manufacturer and one of the first producers in the Netherlands to use cobots. For more than a decade, Heemskerk has relied on cobots for automated production. The UR robot loads the CNC machine and sorts out the workpiece. ...

1. Gripping mechanical gripperGripping mechanical gripper is mainly used for high-speed bag stacking, and this kind of gripper gripper is mainly used for stacking bagged items, such as flour, feed, cement, fertilizer and so on. 2. The plywood mechanical gripper is mainly suitable for box palletizing.

1. Modular joint design The collaborative robotic arm features a modular multi-joint design. The joints of the same type on the robotic arm can be replaced freely to meet the scale of enterprise production and the diversification of customer needs. 2. Human-machine collaboration, safety and space saving Collaborative robotic arm can be cloth ...

Compared with traditional industrial robots, Universal Robots has a more advanced design concept. The first is the concept of collaboration, where robots share a workspace with people and complete a certain task together; The second is the concept of safety, which is protected by patents and the way to set safety parameters ...

10. Which vision system brands can Universal Robots be paired with and what is the compatibility? Machine vision systems are becoming more and more standard for robots, it is like the eyes of robots, helping robots to quickly find and identify workpieces, complete relevant workpiece pick-and-place, loading and unloading, and inspection...