Introduction: The M-Series Max Payload Robot integrates a compact design with a long reach and high wrist torque. With an impressive load capacity of up to 1,000 kg, the design of this innovative robot series gives them the power to lift and maneuver heavy loads with extreme ease and precision.
Features:
Small form factor
The MX model JT3 (upper and lower arm upper and lower arms) adopts a new linkage mechanism, and the MG model JT3 (upper and lower arm upper and lower) uses our unique hybrid ring linkage and ball screw, and the well is driven by two large motors to achieve a compact shape with the elimination of the balance bar. The interference range is reduced and the applicability is improved.
It has a wrist torque that is easy to use
All shafts use the same motor as the base shaft motor, so the MG15HL achieves 15.000N. M's super hand jump torque. In addition, the offset distance from the surface of the wrist flange to the center of gravity of the workpiece can be increased, ** suitable for eccentric workpieces, etc.
High rigidity
JT2 and JT3, which have a great impact on the accuracy of the end of the manipulator, adopt ball screws with high rigidity and low reaction force. As a result, the mechanism of the arm is reduced, and the positioning accuracy of the well is realized.
Wide range of motion
By combining our unique "composite linkage mechanism" with the ball screws of JT2 and JT3, the range of motion is ensured. The actual working area of the arm is also more extensive.
Abundant deformations
The 6-axis machine includes 7 models with 6 floor-mounted types and 1 stand type of 350-1 ,500kg, and it can handle a wide range of needs such as assembly and transportation of large heavy loads.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 1,000
Maximum Reach (mm): 4,005
Repeatability (mm) ✽1:±0.1
Range of action (°)
Arm rotation (JT1): ±150
Anterior arm (JT2): +90 - -40
Arm up and down (JT3): +30 - -110
Wrist rotation (JT4): ±360
Wrist flexion (JT5): ±120
Wrist torsion (JT6): ±360
Maximum speed (°/s)
Arm rotation (JT1): 65
Anterior arm (JT2): 33.5
Arm up and down (JT3): 37.5
Wrist rotation (JT4): 65
Wrist flex (JT5): 65
Wrist torsion (JT6): 80
Allowable load torque (N•m)
Wrist rotation (JT4): 8,800
Wrist flex (JT5): 8,800
Wrist twist (JT6): 4,410
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 1,800
Wrist flex (JT5): 1,800
Wrist torsion (JT6): 1,200
Weight (kg): 6,500
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E58 / 15
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the Kawasaki/Kawasaki robot MG10HL payload 1000kg weight 6500kg products, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Robot BX250L Load 250kg Weight 1460kg
Introduction: With a payload of 250kg and a weight of 1460kg, the Kawasaki/Kawasaki Robot BX250L is an optimized body shop robot and a high-speed robot with a built-in cable with a wide range of movements and a powerful handling capacity.
Give birth...
|
|
Kawasaki/Kawasaki Robot ZX165U 165 Kg 2651 mm
Introduction: ZX165U large general robot has a wide range of achievements in various industries and applications; There is no motor on the wrist, which can work in harsher environments; It can cover a wide range of rotation of 360°.
Product Details
...
|
|
Kawasaki/Kawasaki Control Cabinet D60 Semiconductor Robot Max7-axis
Introduction: D Control Cabinet (Semiconductor Robot) A control cabinet for semiconductor robots that corresponds to one arm of the D60 and two arms of the D61. The compact D60 can control up to 7 axes, and the D61 can control 12 axes. The control cabinet for worldwide use meets both SEMI and CE standards.
...
|
|
Kawasaki/Kawasaki Robot BX100L has an arm span of 2,597 mm
Introduction: The BX100L robot's optimized body shop robot can be used to replace existing robots, and is a high-speed robot with built-in cables that can handle everything from small and lightweight welding guns to medium-sized welding guns.
Product parameters
Hand...
|
|
Kawasaki/Kawasaki palletizing robot CP180L 4-axis with an arm span of 3255mm
Introduction: CP180L robot is a new high-speed and powerful palletizing robot, with a high-speed palletizing robot with outstanding handling level. It can meet the needs of a wide range of industries such as food, pharmaceuticals, and printed matter in small quantities. It is the lightest weight in its range and is most suitable for improving palletizing efficiency.
...
|
|
Kawasaki/Kawasaki Robot MX700N Load 700kg Reach 2540mm
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 500 kg and a working range of 2,540 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot BX100N Load 100kg Arm Span: 2200mm
Introduction: The BX100N robot, an optimized body shop robot, has a range of motion suitable for spot welding, has a built-in cable, is more suitable for setting up a small and lightweight welding gun, and a high-density configuration where the robot is set around the workpiece.
Give birth...
|
|
Kawasaki/Kawasaki Robot RS007N Load 7kg Arm span 730mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot BX200L Load 200kg Arm Span: 2597mm
Introduction: BX200L robot load 200kg maximum arm span of 2597mm, optimized body shop robot can replace the existing robot, is a built-in cable, and can cope with large welding guns from the high-speed robot.
...
|
|
Kawasaki/Kawasaki Robot RS010L Load 10kg Reach 1925 mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot MX420L Load 420kg Reach 2778mm
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a 420kg payload and a working range of 2,778mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki arc welding robot RA020N with a payload of 20kg and a weight of 230kg
Introduction: RA020N skilled and flexible arc welding robot, with a maximum load of 20kg in the same series, can cope with large welding guns. From the day the Kawasaki arc welding robot was introduced, it was possible to demonstrate the same abilities as a skilled worker.
...
|
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro1 has 4 axes in each arm
Introduction: duAro1 Kawasaki robot innovation breakthrough - dual-wrist duAro, to achieve true human-machine collaboration. It is possible to perform assembly work such as parts installation and tightening of screws on the work table and conveyor in the same environment as the operator.
...
|
|
Kawasaki/Kawasaki Medical & Pharmaceutical Robot MC004N with a payload of 4kg
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki Robot RS030N Load 30kg Weight 555kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot BX100S payload 100kg Reach: 1634mm
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Features:
High-speed spot welding
By reducing the weight of the arm ...
|
|
Kawasaki/Kawasaki MX500N Mega Payload Robot with a 2540mm reach
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 500 kg and a working range of 2,540 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Paint Robot KF262 Spraying speed 1.2m/s
Introduction: K series painting robot combines strong programming flexibility and high running performance, KF262 robot has a BBR-shaped wrist that is convenient for frontal · surface spraying, and is a space-saving small area explosion-proof spraying robot.
...
|
|
Kawasaki/Kawasaki Control Cabinet F60 8.3kg 6-axis control number
Introduction: The concentration of control cabinet parts· the reduction of small · weight and the optimization of parts have reduced the size and weight of the control cabinet by 77% and 72% compared with the previous Kawasaki model, and achieved miniaturization. Therefore, it can be stored on a 19-inch stand and can be stacked.
|
|
Contact
working hours
