Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries. It has the lightest 3kg payload and compact arm of this series of robots!
Features:
Best-in-class speed
By reducing the weight of the arm and using a small electric motor with high output and high rotational speed, the maximum speed and acceleration have been greatly improved. In addition, the acceleration is changed according to the load weight and posture, which always ensures the maximum performance of the robot and significantly reduces the cycle time.
Small wrist and powerful torque
This makes the wrist more compact, allowing for more flexibility in tight spaces. We have encountered small motors with high output and high speed. Strengthen the rigidity of the robotic arm, etc. Wrist load capacity has been improved. Manipulator. The selection of tools and workpiece shapes has been expanded.
Greater range of motion
By expanding the maximum reach and travel of each axis, the area of movement under and near the robot has also been expanded, allowing for more flexible layouts.
High adaptability to the environment
Each section is a double sealed structure, using waterproof connectors, achieving P67 and IP65 protection for the base shaft. (excluding RS003N)
High scalability
Internal valves and sensor harnesses are available as optional equipment, making them easy to use and install a wide range of peripherals. In addition, maintenance holes are included as standard on each part of the arm to facilitate the addition of assembly lines and piping.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 3
Maximum Reach (mm): 620
Repeatability (mm): ✽1±0.02
Range of action (°)
Arm rotation (JT1): ±160
Anterior arm (JT2): +150 - −60
Up and down the arm (JT3): +120 - −150
Wrist rotation (JT4): ±360
Wrist flexion (JT5): ±135
Wrist torsion (JT6): ±360
Maximum speed (°/s)
Arm rotation (JT1): 360
Anterior and posterior arms (JT2): 250
Arm up and down (JT3): 225
Wrist rotation (JT4): 540
Wrist flexion (JT5): 225
Wrist twist (JT6): 540
Allowable load torque (N•m)
Wrist rotation (JT4): 5.8
Wrist flex (JT5): 5.8
Wrist torsion (JT6): 2.9
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 0.12
Wrist flex (JT5): 0.12
Wrist torsion (JT6): 0.03
Weight (kg): 20
Installation: ground, hanging
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): F60 / 2.0
Degree of protection: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot RS003N load 3kg arm span 620mm product, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Robot RS010L Load 10kg Reach 1925 mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot BX100L has an arm span of 2,597 mm
Introduction: The BX100L robot's optimized body shop robot can be used to replace existing robots, and is a high-speed robot with built-in cables that can handle everything from small and lightweight welding guns to medium-sized welding guns.
Product parameters
Hand...
|
|
Kawasaki/Kawasaki Robot RS015X 6-axis Reach 3,150mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries. It has the largest range of motion in the series of 3,150 mm.
...
|
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro1 has 4 axes in each arm
Introduction: duAro1 Kawasaki robot innovation breakthrough - dual-wrist duAro, to achieve true human-machine collaboration. It is possible to perform assembly work such as parts installation and tightening of screws on the work table and conveyor in the same environment as the operator.
...
|
|
Kawasaki/Kawasaki Articulated Robot CX210L with a payload of 210kg
Introduction: Kawasaki CX210L adopts the international advanced robot design concept, absorbs the international advanced core components, and combines the actual needs of users. After rigorous experimental testing, the high safety, reliability and stability of the system are ensured. The CX210L system is an efficient ...
|
|
Kawasaki/Kawasaki Robot MG10HL Load 1000kg Weight 6500kg
Introduction: The M-Series Max Payload Robot integrates a compact design with a long reach and high wrist torque. With an impressive load capacity of up to 1,000 kg, the design of this innovative robot series allows them to lift and maneuver heavy loads with extreme ease and precision.
|
|
Kawasaki/Kawasaki Robot BX130X Payload 130kg Weight 920kg
Introduction: With a payload of 130 kg and a weight of 920 kg, the BX130X robot is an optimized body shop robot and a high-speed robot with built-in cables, which can handle everything from small and lightweight welding guns to medium-sized welding guns.
Features:
High speed...
|
|
Kawasaki/Kawasaki MX500N Mega Payload Robot with a 2540mm reach
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a load of 500 kg and a working range of 2,540 mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki painting robot KJ314 wall mounted 7-axis with an arm span of 3100mm
Introduction: KJ314 wall-mounted robot - 7 axes with a large hollow inner diameter wrist of φ70, can be equipped with a spraying machine on the upper part of the arm, is a lightweight explosion-proof spraying robot with built-in cables, and has a wide range of action, can cope with large workpieces. With a seventh axis, it can achieve a wider range of motion ...
|
|
Kawasaki/Kawasaki painting robot KJ155 6-axis with an arm span of 1545mm
Introduction: The KJ155 robot is a small painting robot with a hollow wrist of φ50mm, which can cope with small rotary cups. Built-in pipelines make it easy to build piping schemes. The body weight is less than 200 kg, the left and right sides are symmetrical, and the lateral area is small, so it can be painted in a narrow field.
...
|
|
Kawasaki/Kawasaki arc welding robot RA005L with a payload of 5kg and an arm span of 903mm
Introduction: RA005L arm is a small, skilled and flexible arc welding robot, which is more suitable for the welding of small items. From the day of the introduction of the Kawasaki arc welding robot, it can be comparable to the welding quality of a skilled welder.
Products...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Kawasaki/Kawasaki Paint Robot KJ264 weighs 530 kg and has an arm span of 2,640 mm
Introduction: The KJ264 bracket robot has a large hollow inner diameter wrist of φ70, which can be equipped with a spraying machine on the upper part of the arm, and is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, which can cope with large workpieces. Bracket type specifications.
...
|
|
Kawasaki/Kawasaki palletizing robot CP500L 4-axis weight 650kg
Introduction: CP500L robot has a high-speed palletizing robot with outstanding handling level. Carrying heavy loads with a lightweight arm makes it possible to save space and energy. It can meet the needs of a wide range of industries, such as food, medicine, printed matter, and building materials.
...
|
|
Kawasaki YF002N load 2kg operating range ø600×H200mm
Introduction: Kawasaki Parallel Robot [Y Series] is a high-speed sorting robot, which can be widely used in the production line of food, medicine, cosmetics and the assembly of solar panels. The YF002N is lightweight and can be easily set up in tight spaces.
features
Processing power ...
|
|
Kawasaki/Kawasaki Robot RS007L Load 7kg Arm span 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Carrier Robot MT400N has an arm span of 3503mm
Introduction: Based on rich experience and technology, the scaffolded large heavy load handling robot MT400N is developed. It is suitable for up and down work with a maximum operating range of 3,503 mm (horizontal) and 4,319 mm (vertical). Using Kawasaki's separately developed equipment, the compact body ...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki painting robot KJ194 with a payload of 15 kg at the wrist and 25 kg at the arm
Introduction: The KJ194 robot has a large hollow inner diameter wrist of φ70, and can be equipped with a spraying machine on the upper part of the arm. Ground-mounted specifications.
...
|
|
Contact
working hours
