Summary: The Fisher FIELDVUE DVC2000 meter allows you to operate closer to the set point, improving product quality with more accurate control. WITH FIELDVUE PERFORMANCE DIAGNOSTICS, VALVE OPERATION WILL BE MONITORED ONLINE TO ASSESS PERFORMANCE AND RELIABILITY.
Features:
The high-performance linkage-less feedback system eliminates the need for direct contact, eliminating component wear.
Fully encapsulated electronic components are resistant to vibrations, high temperatures, and corrosive environments.
Enables rapid response to noticeable step changes and precise control of slight setpoint changes.
DVC6200 is a HART communication device that can access information from any device in the loop. This flexibility reduces the risk of exposure to hazardous environments and provides easy visibility into the condition of valves installed in hard-to-reach locations.
The modular design eliminates the need to disassemble field wiring or pneumatic piping to replace important working components.
If installed in an integrated control system, significant savings can be made in hardware costs and installation expenses.
Self-diagnostic capabilities provide an assessment of valve performance and health.
Digital communication provides easy access to valve health.
Product parameters
Regional Classification: FM Explosion Proof, Intrinsically Safe, FISCO, Type N, Fire Retardant, Non-Flammable,
Certifications: CSA, FM, ATEX, IECEx, CUTR, Lloyd's Register, Peso, KGS, INMETRO, NEPSI, TIIS, Lloyd's Register of Shipping, Single Seal Equipment
Communication protocol: HART® 4–20 mA
Data interface: wired
Diagnosis: Yes
Input Signal: Electrical
Maximum Outlet Pressure: 145 psig
Installation Type: All-in-one installation
Operating temperature: standard temperature, high temperature
Position control: throttle control, on/off
Power Supply: Local
Process control: flow, pressure, temperature, level
Supply medium: air, natural gas, nitrogen
This article introduces the Fisher/Fisher Valve Controller FIELDVUE DVC6200 all-in-one installation products, if you are interested in Fisher/Fisher Valve Controller, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Fisher/Fisher 2625 Series Flow Amplifiers Pneumatic input signal
Summary: The Fisher 2625 Series flow amplifier works with a positioner on the throttle control valve to increase stroke speed. The 2625NS is a version for nuclear industry applications that uses synthetic rubber components that are better able to withstand high temperatures and radiation environments. The 2625 and 2625SST are certified ...
|
|
Fisher/Fisher 546 Series Electrical Converters DC input signal
Introduction: The Fisher 546, 546S, and 546NS converters take a DC input signal and convert it into a proportional pneumatic output signal using a torque motor, nozzle baffle, and pneumatic amplifier. The nozzle pressure of the control relay will be led through the pipe to the torque motor feedback corrugation.
|
|
Fisher/Fisher 4200 Electronic Position Transmitter 4-20mA
Introduction: The Fisher 4200 position transmitter can sense rotary or slide rod valves, drains, shock absorbers, or other devices. Once the instrument is installed, the potentiometer shaft is mechanically connected to the device to sense mechanical motion. The instrument is available in standard or long-line ...
|
|
Fisher/Fisher i2P-100 electrical converter Low compressed air consumption
Summary: The Fisher i2P-100 converter is designed to meet environmental requirements and is optimized to provide maximum uptime. It has a double chamber sealed with explosive liquids, which prevents natural gas from migrating into the electrical pipes. Additional advantages include corrosion protection, tolerance of dirty supply ...
|
|
Fisher/Fisher Model 122A 3-Way Switching Valve weighs 2kg
Description: The Fisher Model 122A 3-Way Switching Valve is a high-volume, cost-effective, 3-way pneumatic switching valve for on/off applications. The valve can be used for split or combined gaseous applications, gas-liquid split liquid service and combined liquid applications.
...
|
|
Fisher/Fisher Outer Float Sensor 249 Series Built-in liquid damping holes
Summary: For vessels with internal obstructions or considerable internal turbulence, the Fisher 249 Outer Pontoon Level Sensor is more stable to operate than the Inner Pontoon Sensor. These sensor designs utilize the Archimedes principle to measure the liquid level, liquid interface level, or density/specific ...
|
|
Fisher/Fisher EZR Series Pressure Reducing Regulators are tightly switched off
Introduction: EZR type commander-action pressure reducing regulator runs accurately, smoothly and quietly, with tight shut-off and long service life, and can have good performance even in dirty conditions. The EZR series can be installed in a variety of applications such as natural gas transmission/distribution systems, industrial and commercial facilities. ...
|
|
Fisher/Fisher Back Pressure Regulator Model MR108 External Pressure
Introduction: The MR108 back-pressure regulator is a direct-acting, high-capacity, multi-purpose regulator. They are designed to handle pressures up to 400 psig / 27.6 bar and temperatures up to 250°F / 121°C. It provides reliable and ...
|
|
Fisher/Fisher 4194 Differential Pressure Controller Pressure: 40 psig
Introduction: The Fisher 4194 Differential Pressure Indicator Controller displays process differential pressure and set points, using a process dial for easy reading. The controller senses two different pressure values and compares the differential pressure between them and the operator's adjusted set value. The available models of this type of controller are: ...
|
|
Fisher/Fisher MR95 Series Regulators Inlet pressure 69 bar
Introduction: The MR95 series regulators are compact, high-flow, direct-acting regulators. Typical applications include superheated steam, steam injection, steam heating, nitrogen purging, boiler feedwater, process chemicals, cooling water, test setups, wash storage tanks, sterilizers / high pressure ...
|
|
Fisher/Fisher digital valve controller FIELDVUE DVC6200 SIS
Introduction: The Fisher FIELDVUE DVC6200 SIS digital valve controller is capable of controlling the safe closing of valves while monitoring the health of the valve assembly, and safely extending the time between validation tests with part-stroke testing. Enhance your Safety Instrumented System (SIS) valves' ...
|
|
Fisher/Fisher Series 67D Series Pressure Regulators 1/2 NPT Internal Pressure
Introduction: The 67D Series direct-acting regulators and filter regulators are typically used to provide stable decompression of vaporized liquids to pilot-operated controllers and other pneumatic instruments.
Features:
Compact design
...
|
|
Fisher/Fisher Model 99 Pressure Regulator Outlet pressure 6.9 bar
Description: The Fisher Model 99 gas regulator offers a wide range of controlled pressures and can be used in a wide range of conveying, industrial, and commercial applications. The Model 99 regulator has a Type 61 pilot that is integrated into the actuator housing. The Model 99 regulator can handle up to 1000 psig ...
|
|
Fisher/Fisher Model 1190 Low Pressure Hermetically Sealed Regulator Outlet pressure 5.2 bar
Introduction: The Model 1190 Low Pressure Hermetically Sealed Valve is a pilot-acting pressure reducing valve with a pressure supply regulator. This valve is used for extremely precise pressure control in very low pressure hermetic seal systems.
Features:
Quick change ...
|
|
Fisher/Fisher J31 Series Rotary Gauge Aluminium dial
Description: The J31 series can be used on stationary or mobile storage tanks to visually indicate the capacity of LPG or anhydrous ammonia (NH3) in the container. When the probe tube of the gauge is located in the steam space of the tank, the small vent opens and the gauge works. Moving the hands on the dial allows the tube ...
|
|
Fisher/Fisher two-stage regulator Model R231A is integrated
Introduction: The Model R232A regulator is certified by Underwriters Laboratories (United States Safety Testing Laboratories Inc.) for use in LPG systems. The regulator is designed to reduce tank pressure through an integrated two-stage system that provides an 11-inch water column of outlet pressure. ...
|
|
Fisher/Fisher two-stage regulator model R632A Inlet pressure 17.2 bar
Introduction: The R632A pressure regulator is UL (United States Safety Testing Laboratories Inc.) certified and is dedicated to the two-stage pressure regulating system of liquefied petroleum gas. The unit is designed to reduce tank pressure to 11 in w.c. / 27.4 mbar with an integrated secondary system. For the standard configuration, the primary screen ...
|
|
Fisher/Fisher 646 Electronic Pneumatic Converter Pressure 20 psig
Introduction: The Fisher 646 electro-pneumatic converter uses a converter module that converts a 4 to 20 mA input signal into a proportional 0.2 to 1.0 bar (3 to 15 psig) pneumatic output signal. The small parts used in the converter module are all very small in mass and have a very small perimeter ...
|
|
Fisher/Fisher Regulator 627 Series The aluminium casing weighs 3kg
Introduction: The Fisher 627 Series direct-acting pressure reducing regulators are suitable for use in both low and high pressure systems. These regulators can be used with natural gas, air, or a variety of other gases. Performance characteristics vary according to the structure.
Products...
|
|
Fisher/Fisher Series 167D Changeover Valve Inlet pressure 27.6 bar
Description: The 167D Series Switching Valve is used to provide reduced, stable vaporized liquid pressure to pilot-acting controllers and other pneumatic instruments. Models 167D and 167DS valves are two-way switching valves. Models 167DA and 167DAS are three-way switching valves.
...
|
|
Contact
working hours
