Introduction: Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the fuselage, avoiding interference from the rear of the arm; It can be transported by 30% to 8 kg, and can be easily equipped with a variety of welding guns and conveyors, making it ideal for transportation.
| Model | FD-V8 | | Number of axes | 6 axes | | load | 8kg | | Repeatability accuracy | ±0.08mm | | Drive capacity | 3016w | | Range of motion | Basic axis J1 | ±170°(±50°) | | Basic axis J2 | ﹣155°~﹢90° | | Basic axis J3 | ﹣170°~﹢190° | | Arm axis J4 | ±180° | | Arm axis J5 | ﹣50°~﹢230° | | Arm axis J6 | ±360° | | Maximum speed | Basic axis J1 | 4.19rad/s｛240°/s｝(3.32rad/s｛190°/s｝) | | Basic axis J2 | 4.19rad/s｛240°/s｝ | | Basic axis J3 | 4.01rad/s｛230°/s｝ | | Arm axis J4 | 7.50rad/s｛430°/s｝ | | Arm axis J5 | 7.50rad/s｛430°/s｝ | | Arm axis J6 | 11.00rad/s｛630°/s｝ | | Load capacity | Permissible torque J4 | 17.6N·m | | Permissible torque J5 | 17.6N·m | | Permissible torque J6 | 7.8N·m | | The permissible moment of inertia J4 | 0.43kg·m² | | The permissible moment of inertia J5 | 0.43kg·m² | | The permissible moment of inertia J6 | 0.09kg·m² | | The cross-sectional area of the robot's range of motion | 3.11m²x340° | | Ambient temperature and humidity · | 0~45°C, 20~80%RH (no condensation) | | Body weight | 140kg | | The upper arm can carry weight | 10kg | | Installation: | Full-wear, upside down, side-mounted |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces OTC/ODC industrial robot FD-V8 products, if you are interested in OTC/ODC industrial robots, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
OTC/ODC 7-axis industrial robot FD-B4LS AC servo motor drive
Introduction:OTC/ODC 7-axis industrial robot FD-B4LS is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric approach ...
|
|
OTC/ODC welding robot FD-B4L manipulator 6 axes
Introduction: OTC/OD welding robot FD-B4L manipulator 6-axis robot, the maximum carrying weight is 4kg, the position repeatability is ±0.08mm, the cross-sectional area of the robot action range is 6.37m²x340, and the ground/side-hanging/hoisting installation mode.
...
|
|
OTC/ODC 7-axis industrial robot FD-V20S handling weight 20kg
Introduction: OTC/ODC 7-axis industrial robot FD-V20S is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC/ODC 6-axis welding robot FD-S3 weighs 31kg
Introduction:OTC/ODC 6-axis welding robot FD-S3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance.
Give birth...
|
|
OTC/ODC Industrial Robot FD-B6 6-axis robotic arm cutting welding load 6Kg
Introduction: Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the fuselage, avoiding interference from the rear of the arm; Can...
|
|
OTC/ODC T500P Intelligent Inverter DC Pulse TIG Welding Machine
Introduction:OTC/ODC T500P Intelligent Inverter DC Pulse TIG Welding Machine/High Efficiency Welding OTC welding robot 500A output current high efficiency welding realization; The welding management function is equipped with welding abnormalities for early detection.
Give birth...
|
|
OTC/ODC 6-axis industrial robot FD-V280L can handle up to 280kg
Introduction: OTC/ODC 6-axis industrial robot FD-V280L is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC/ODC Industrial Robot FD-V80 6-axis robotic arm cutting and handling
Product Introduction
OTC/ODC Industrial Robot FD-V80 6 Axis Payload 80Kg Welding Robot Handling Robot Palletizing Robot
|
|
OTC/ODC 5-axis welding robot FD-G3 drive capacity 1400W
Introduction:OTC/ODC 5-axis welding robot FD-G3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Features:
Easy to operate, simple in structure, ...
|
|
OTC/ODC Robot FD-B4S 7-axis payload 4kg weight 189kg
Introduction: OTC/ODC Robotics FD-B4S
Features:
The position and posture of the robot can be changed while keeping the position and posture of the welding torch unchanged;
Complex teaching of the 7-axis robot, through the use of coordination techniques ...
|
|
OTC/ODC Industrial Robot FD-B6L 6-Axis Welding, Handling and Palletizing
Introduction: Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the fuselage, avoiding interference from the rear of the arm; Can...
|
|
OTC positioner A2PF301-JNN load 300kg
Introduction: Positioner 2PF300/500/1000 from the smallest 25kg to the largest 1000kg, a total of 6 models; It can be operated through the teaching box of the robot, and the teaching work can be carried out at the same time as the robot; The AC servo motor and backlash-free reducer are used, so you can get and ...
|
|
OTC/ODC 6-axis industrial robot FD-V600 weighs 2850kg
Introduction:OTC/ODC 6-axis industrial robot FD-V600 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance.
...
|
|
OTC/ODC Inverter DC Pulse TIG Arc Welding Machine ADP400 Full Digital
Introduction: ADP400 all-digital IGBT inverter control AC/DC dual-purpose pulse TIG welding machine further improves the weldability of thin plate by adjusting the AC frequency and controlling the heat input of the weld, and the arc concentration is good, and the weldability of fillet welding and thin plate butt welding is greatly improved.
...
|
|
OTC/ODC DA300P AC & DC dual-purpose pulse TIG welding machine
Introduction: OTC/OD DA300P all-digital IGBT soft switch inverter control AC and DC dual-purpose pulse TIG welding machine, by adjusting the AC frequency and controlling the heat input of the weld, further improve the weldability of the thin plate, equipped with low noise pulse function.
...
|
|
OTC/ODC 6-axis robot FD-V25 with a payload of 25kg and a capacity of 5600w
Introduction: OTC/ODI 6-axis robot FD-V25 with a load of 25kg and a capacity of 5600w
Features:
It can be suitable for the handling of light objects;
Wide range of applications
Product Specifications:
We put our customers first...
|
|
OTC/ODEC Positioner 1PB250/500/1000 250-1000kg
Product introduction: Positioner 1PB250/500/1000 from the smallest 25kg to the largest 1000kg, a total of 6 models; It can be operated through the teaching box of the robot, and the teaching work can be carried out at the same time as the robot; It uses an AC servo motor and a backlash-free reducer, so you can get ...
|
|
OTC/ODC Industrial Robot FD-V8L Weight 273Kg 6 axes Load 8Kg
Introduction: Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the fuselage, avoiding interference from the rear of the arm; Can...
|
|
OTC/Odichi AC/DC dual-purpose TIG pulse arc welding machine AEP300 · 500
Introduction: OTC/Odichi AC/DC dual-purpose TIG pulse arc welding machine initial current adjustment function, current scarring, descending function, arc closing processing function and so on to achieve higher requirements for welding quality.
Features:
Rectangular wave ...
|
|
OTC/ODC FD-V8 welding robot
FD-V8 Features:
Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the body, avoiding dry-up behind the arm.
|
|
Contact
working hours
