Introduction: Positioner 2PF300/500/1000 from the smallest 25kg to the largest 1000kg, a total of 6 models; It can be operated through the teaching box of the robot, and the teaching work can be carried out at the same time as the robot; It uses an AC servo motor and a backlash-free reducer, so it can achieve the same high accuracy as the robot; When used in conjunction with a robot, coordinated movements can be realized. (Coordination software purchase)
Product Details
The maximum weight is 300kg
Maximum swing speed 3.1rad/sec[180°/s]
Maximum tilt speed 2.2rad/sec [125°/s]
The maximum permissible torque is 294N·m
The tilt shaft allows a maximum twist of 882N·m
Repeatability ±0.05mm (at R250 position)
Stop Position Any
Weight 260kg
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
OTC/ODC 6-axis industrial robot FD-V280L can handle up to 280kg
Introduction: OTC/ODC 6-axis industrial robot FD-V280L is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC WE P400L Pulse Welding Machine Three-phase 380V±10%
Introduction:WE P400L Full Digital Inverter Control DC Low Spatter Pulse Welding Machine DC Low Spatter Control Pulse Mode CBT-EX; Further inhibit the generation of spatter and improve the welding quality; The new pulse control method realizes high-quality welding of a variety of new materials; Aluminum alloy, aluminum, stainless steel, galvanized ...
|
|
OTC/ODC Welding Robot FD-V6S Load 6kg Capacity 3600W
Introduction: OTC/OD welding robot FD - V6S
Features:
The position and posture of the robot can be changed while keeping the position and posture of the welding torch unchanged;
Complex teaching of 7-axis robots, through the use of co...
|
|
OTC/ODC 6-axis industrial robot FD-V600 accuracy ± 0.3mm
Introduction:OTC/ODC 6-axis industrial robot FD-V600 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC/ODC 6-axis welding robot FD-S3 weighs 31kg
Introduction:OTC/ODC 6-axis welding robot FD-S3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC/ODC 6-axis welding robot FD-S3 weighs 31kg
Introduction:OTC/ODC 6-axis welding robot FD-S3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance.
Give birth...
|
|
OTC/ODC welding robot FD-V130 with a load of 130kg and a weight of 765kg
Introduction: The slim design of OTC FD-V130 welding robot effectively avoids interference, and is better compatible with a wide range of action and a narrow interference radius. Achieve a high level of action speed; Compatible with standard communication specifications, the application cable is distributed from the base of the robot to the shoulder
...
|
|
OTC/ODC Industrial Robot FD-B6 6-axis robotic arm cutting welding load 6Kg
Introduction: Achieve a high level of action speed in the same industry and shorten the operation cycle time; The basic axis and return radius of the robot are designed to be slim, which avoids interference with fixtures and workpieces; The cables required for the Synchro-Feed soldering configuration are hidden in the fuselage, avoiding interference from the rear of the arm; Can...
|
|
OTC/ODC Industrial Robot FD-V80 6-axis robotic arm cutting and handling
Product Introduction
OTC/ODC Industrial Robot FD-V80 6 Axis Payload 80Kg Welding Robot Handling Robot Palletizing Robot
|
|
OTC/ODC 6-axis welding robot FD-S3 ±0.08mm
Introduction:OTC/ODC 6-axis welding robot FD-S3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
...
|
|
OTC/ODC welding robot FD-B4L manipulator 6 axes
Introduction: OTC/OD welding robot FD-B4L manipulator 6-axis robot, the maximum carrying weight is 4kg, the position repeatability is ±0.08mm, the cross-sectional area of the robot action range is 6.37m²x340, and the ground/side-hanging/hoisting installation mode.
...
|
|
OTC/ODC six-axis robot FD-V210 210kg ±0.15mm
Introduction: OTC/ODI Robot FD-V210 load 210kg capacity 18000W
Product Advantages:
The operation is simple, the structure is simple, the speed is fast, and the performance of the robot is further improved;
Simple maintenance, maintenance ...
|
|
OTC/ODC 5-axis welding robot FD-G3 drive capacity 1400W
Introduction:OTC/ODC 5-axis welding robot FD-G3 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Features:
Easy to operate, simple in structure, ...
|
|
OTC/ODC 6-axis industrial robot FD-V700 700KG
Introduction:OTC/ODC 6-axis industrial robot FD-V700 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Give birth...
|
|
OTC/ODC Inverter DC Pulse TIG Arc Welding Machine VRTP400
Introduction:OTC/ODC Inverter DC Pulse TIG Arc Welding Machine VRTP400 rich and diverse pulse mode functions, which can achieve the best welding according to the shape of the workpiece; In IG welding, there is a safety function that automatically stops gas when there is no welding and the gas continues to flow for more than 2 minutes.
...
|
|
OTC SW-41 Automatic Submerged Arc Welding Machine weighs 48kg
Introduction: ODC automatic submerged arc welding machine SW-41 line oblique welding/curved surface welding/stable welding can be used for welding with a maximum current of 1500A, and can also be used with external power supply, such as KRUMC-1000/1500.
Give birth...
|
|
OTC/ODC 6-axis industrial robot FD-V400L IP54 protection
Introduction: OTC/ODC 6-axis industrial robot FD-V400L is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric ...
|
|
OTC/ODC FD-B15 6-axis welding robot with a load of 15kg and a weight of 286kg
Introduction: OTC/OD FD-B15 6-axis welding robot is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance.
...
|
|
OTC/ODC 6-axis industrial robot FD-H5 can handle up to 5kg
Introduction: OTC/ODC 6-axis industrial robot FD-H5 is easy to operate, simple in structure, fast in speed, and the performance of the robot has been further improved; Simple maintenance, easy maintenance, low cost of system construction, high performance
Product parameters
Our customer-centric approach ...
|
|
OTC/ODC Industrial Robot FD-A20 6-axis load 20kg
Introduction: OTC/ODI six-axis industrial robot FD-A20 robot action range cross-sectional area of 3.32m²×340°, body weight of 355kg, use of environmental conditions temperature 0-45 °C, humidity 20-80% RH (no condensation).
...
|
|
Contact
working hours
