Panasonic limited reflection photoelectric sensor amplifier is built with EX-43T

Panasonic Limited Reflection Photoelectric Sensor Amplifier has a built-in EX-43T repeatability of 0.05 mm or less (set distance: 30 mm), a power supply voltage of 12~24V DC±10% and a pulsating P-P of 10% or less
Panasonic limited reflection photoelectric sensor amplifier is built with EX-43T

Panasonic limited reflection photoelectric sensor amplifier is built with EX-43T

project	content
Order product number	EX-43T
Model	EX-43T
Detection distance	20~35mm(center 30mm)
Detection distance	(50x50mm white matte paper)
Minimal detection of objects	φ0.03mm gold wire (setting distance: 30mm)
Deviation ( Hysteresis )	Use white matte paper (50x50mm) with less than 10% of the working distance
Repeatability (perpendicular to the detection axis)	0.05 mm or less (set distance: 30 mm)
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	35mA or less
output	NPN open-collector transistors
	・Maximum sink current: 100mA
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output: Outputs the action	ON when light is entered
Output: Short-circuit protection	Equipped with
Reaction time	0.5ms or less
Working status indicator	Red LED (lights up when ON is output)
Stability indicator	Green LED (lights up when light is stable and not in light)
Sensitivity regulator	-
Timer function	Equipped with variable disconnect delay timer (about 0.1~1s)
Timer function	Note: The timer is always in effect.
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type (JIS)
Environmental resistance: The ambient temperature at which it is used	-25~+55°C (note no condensation and freezing), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more
Environmental resistance: Vibration resistance	Frequency: 10~500Hz, double amplitude: 33mm(MAX.20G), 2 hours each in X, Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Infrared LED (Emission peak wavelength: 680nm, modulated type)
Material	Polyaryl esters
cable	0.2mm2 3-core rubber cable, 2m long
Cable extension	The total length of the cable of 0.3mm2 or more can be extended to 100m
weight	Body weight: Approximately 45 g
weight	Package weight: about 70g
annex	Adjustment screwdriver: 1 pc

Panasonic Limited Reflection Photoelectric Sensor Amplifier has a built-in EX-43T repeatability of 0.05 mm or less (set distance: 30 mm), a power supply voltage of 12~24V DC±10% and a pulsating P-P of 10% or less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic limited reflection photoelectric sensor amplifier is built with EX-43T

Sections viewed

Contact

working hours