Panasonic multi-voltage power supply type photoelectric sensor EQ-501T with timer

Panasonic multi-voltage power supply type photoelectric sensor EQ-501T, power consumption/current consumption: 5VA or less, DC: 4W or less, output relay contact 1a, distance setting range 0.2~2.5m
Panasonic multi-voltage power supply type photoelectric sensor EQ-501T with timer

Panasonic multi-voltage power supply type photoelectric sensor EQ-501T with timer

project	content
Order product number	EQ-501T
Model	EQ-501T
The distance is set within the range	0.2～2.5m
	Note 1: The distance setting range refers to the maximum detection distance range that can be set by the distance setting adjuster. The sensor can detect objects of 0.1m or more.
	Note 2: The distance setting range, detection distance, and response are relative to the white matte paper (200x200mm).
Detection distance (when the maximum distance is set)	0.1～2.5m
Detection distance (when the maximum distance is set)	Note: The distance setting range, detection distance, and tolerance are relative to the white matte paper (200x200mm).
Deviation ( Hysteresis )	10% or less of the operating distance
Deviation ( Hysteresis )	Note: The distance setting range, detection distance, and tolerance are relative to the white matte paper (200x200mm).
Supply voltage	24~240V AC±10% or 12~240V DC±10% pulsating P-P10% or less
Power consumption/current consumption	AC: 5VA or less
Power consumption/current consumption	DC: 4W or less
output	Relay contact 1a
	・Opening and closing capacity: 250V AC 3A (resistive load), 30V DC 3A (resistive load)
	・Electron life: 100,000 cycles or more (opening and closing frequency 1,200 times/hour)
	・Machine life: 50,000,000 cycles or more (opening and closing frequency: 18,000 cycles/hour)
Output: Outputs the action	You can use the toggle switch to select ON on detection or ON on non-detection
Output: Short-circuit protection	-
Reaction time	20ms or less (timer setting time for timer type)
Working status indicator	Orange LED (lights up when ON is output)
Stability indicator	Green LED (lights up in steady operation)
Detection mode switching	Equipped with a mechanical 2-turn adjuster with indicator
Timer function	Variable (0.1~5s) equipped with on/off delay timer
Automatic anti-jamming function	Equipped with
Automatic anti-jamming function	Note: Sometimes the detection is unstable depending on the setting state and the object being detected. When setting up this product, be sure to check the operation with the actual inspection object.
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type (JIS)
Environmental resistance: The ambient temperature at which it is used	-20~+55°C (note no condensation and freezing), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	Between the charging terminal, the non-charging metal part, and the contact output: AC2,000V for one minute
Environmental resistance: Withstand voltage	Between contacts: AC1,000V for 1 minute
Environmental resistance: insulation resistance	Charging terminals, non-charging metal parts, and contact outputs to and from each other: 100 MΩ or more, a high-impedance meter based on DC500V
Environmental resistance: Vibration resistance	Frequency: 10~55Hz, double amplitude: 1.5mm X, 2 hours each in Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Infrared LED (projection peak wavelength: 855nm, modulated type)
Light Receiver	2-segment photodiode
Material	Body shell: ABS
	Front cover: Polycarbonate
	Display cover: Polycarbonate
接続方式	Terminal block connector
Wiring cables	Suitable for ring cable ø9~ø11mm
Wiring length	The total length of rubber cables of 0.3mm2 or more can be extended to 100m
weight	Body weight: Approximately 100 g
annex	Adjustment screwdriver: 1 pc

Panasonic multi-voltage power supply type photoelectric sensor EQ-501T, power consumption/current consumption: 5VA or less, DC: 4W or less, output relay contact 1a, distance setting range 0.2~2.5m. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic multi-voltage power supply type photoelectric sensor EQ-501T with timer

Sections viewed

Contact

working hours