Panasonic side-detection regressive reflective photoelectric sensor EX-29B

Panasonic side detection regressive reflective photoelectric sensor EX-29B, power supply voltage 12~24V DC± 10% pulsation P-P 10% or less, current consumption 13mA or less
Panasonic side detection regressive reflective photoelectric sensor EX-29B,
Panasonic side-detection regressive reflective photoelectric sensor EX-29B

project	content
Order product number	EX-29B
Model	EX-29B
Detection distance	30～200mm
Detection distance	Note: The detection distance and detected object of the regressive reflective sensor are relative to the RF-200 mirror. In addition, the detection distance indicates the range within which the mirror can be set. The detection distance of the detected object can also be less than 30 mm. However, if the mirror is placed below 100 mm, the detection object should be opaque.
Detect objects	Opaque and translucent bodies of φ15mm or more
Detect objects	Note: The detection distance and detected object of the regressive reflective sensor are relative to the RF-200 mirror. In addition, the detection distance indicates the range within which the mirror can be set. The detection distance of the detected object can also be less than 30 mm. However, if the mirror is placed below 100 mm, the detection object should be opaque.
Deviation ( Hysteresis )	-
Repeatability (perpendicular to the detection axis)	0.5mm or less
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	13mA or less
output	NPN open-collector transistors
	・Maximum sink current: 50mA
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 2 V or less (at 50 mA inflow current), 1 V or less (at 16 mA inflow current)
Output: Short-circuit protection	Equipped with
Reaction time	0.5ms or less
Working status indicator	Orange LED (lights up when ON is output)
Stability indicator	Green LED (lights up when light is stable and not in light)
Sensitivity regulator	Equipped with a continuously variable regulator
Working mode switch	-
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type (JIS)
Environmental resistance: The ambient temperature at which it is used	-25~+55°C (note no condensation and freezing), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more
Environmental resistance: Vibration resistance	Frequency: 10~500Hz, double amplitude: 3mm(MAX.20G), 2 hours each in the X, Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Red LED (modulated)
Projection Element: The wavelength of the peak wave	680nm
Material	Shell: Polyaryl ester
Material	Lens: Polyaryl ester
cable	0.1mm2 3-core rubber cable, 2m long
Cable extension	The total length of the cable of 0.3 mm2 or more can be extended to 50 m
weight	Body weight: Approximately 20 g
weight	Package weight: about 45g
annex	RF-200 (mirror): 1 pc
annex	Adjustment screwdriver: 1 pc

Panasonic side detection regressive reflective photoelectric sensor EX-29B, power supply voltage 12~24V DC± 10% pulsation P-P 10% or less, current consumption 13mA or less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic side-detection regressive reflective photoelectric sensor EX-29B

Sections viewed

Contact

working hours