| project | content |
| Order product number | EX-L221-P |
| Model | EX-L221-P |
| Detection distance | 45～300mm |
(□ use 100mm white matte paper) |
| Spot size (typical example) | Ø1mm or less |
(at a distance of 1 m) |
| Detect objects | Opaque, translucent, hyaline |
| Smallest Detected Objects (Typical Example) | ø0.01mm wire |
Note: The reference value when the sensitivity adjuster setting is adjusted to the optimal state. |
| Deviation ( Hysteresis ) | 20% or less of the operating distance |
| Repeatability | Detection shaft right angle direction: 0.2mm or less |
| Repeatability (typical example) | Detection shaft right angle direction: 0.02mm or less (when the distance is 100~200mm) |
Note: The reference value when the sensitivity adjuster setting is adjusted to the optimal state. |
| Supply voltage | 12~24V DC ±10% fluctuation P-P10% or less |
| Current consumption | 15mA or less |
| output | PNP transistors and open-circuit collectors |
・Maximum outflow current: 50mA |
・Applied voltage: 26.4V DC or less (between output and +V) |
・Residual voltage: 2 V or less (at 50 mA outflow), 1 V or less (at 16 mA) |
| Output: Outputs the action | ON when the light is in/ON when the light is not in the light is set: The output action is switched to the input line |
| Output: Short-circuit protection | Equipped with (short-circuit protection/reverse polarity protection) |
| Reaction time | 0.5ms or less |
| Working status indicator | Orange LED (lights up when ON is output) Transmissive mounted on the light receiver |
| Stability indicator | Green LED (lights up when light is stable and light is not in light) The transmittance type is mounted on the light receiver |
| Automatic anti-jamming function | Equipped (up to 2 units can be mounted closely) |
| Sensitivity regulator | Equipped with continuously variable resistors |
| Environmental resistance: Protective structure | IP67(IEC、JIS) |
| Environmental resistance: The ambient temperature at which it is used | -10~+55°C (but there should be no condensation and freezing), storage: -30~+70°C |
| Environmental resistance: Ambient humidity is used | 35~85%RH, storage: 35:35~85%RH |
| Environmental resistance: The illumination of the use environment | Incandescent lamp: 3,000 lx or less on the light-receiving surface |
| Environmental resistance: Withstand voltage | AC1,000V for 1 minute Between all charging parts and the case |
| Environmental resistance: insulation resistance | A high-impedance meter based on 250 VDC between all charging parts and the housing, 20 MΩ or more |
| Environmental resistance: Vibration resistance | Frequency: 10~500Hz Double amplitude: 1.5mm (maximum 10G) 2 hours in each direction of X, Y and Z |
| Environmental resistance: impact resistance | Acceleration: 500 m/s2 (about 50 G), 3 times in each direction of X, Y and Z |
| Projectors | Red Diode Laser Class 1 (JIS/IEC/FDA) (Note) |
[Maximum output: 2 mW, peak luminous wavelength 655 nm] |
Note: According to Laser Notice No. 50 (June 24, 2007), it complies with FDA regulations (21 CFR 1040.10 and 1040.11). |
| Material | Shell: PBT |
Front window: Acrylic |
Lens: Glass |
| cable | 0.15mm2 4-core (2-core transmissive projector) 2m with rubber insulated cable |
| Cable extension | The total length of the cable of 0.3 mm2 or more can be extended to 50 m (100 m for each of the transmitting medium projector and light receiver) |
| weight | Body weight: Approximately 45 g |
Package weight: about 60g |
| annex | MS-EXL2-3 (Mounting Plate): 1pc |
Contact
working hours
