Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are electromechanical contacts that are passive and use double relay technology. Sizes range from 22.5 to 90 mm, with contact counts ranging from two to eight.
Product Advantages:
A wide range of product types for all safety functions
Cost-effective
Push-in terminals with spring-loaded or screw connections reduce commissioning time
High safety with low space requirements
Universal power supplies offer a high degree of application flexibility
Electromechanical, rugged and compact
Product parameters
Certificates: CE, cULus Certification, EAC (Eurasian), TÜV, CCC
Application Options: Instantaneous Emergency Stop Monitoring, Limit Switches, Safety Gate Monitoring
Operating modes: single channel, auto-reset, manual reset
Product standard: EN 60947-5-1
Standards: EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1
Supply voltage (V): 24,0
Power Type: AC/DC
Terminal type: Fixed
Termination Type: Screw terminal
Number of instantaneous safety contacts: 3
Number of time-delay safety contacts: 0
Number of auxiliary contacts: 1
Number of semiconductor outputs: 0
Stop Category: 0
**High current I at DC13 (6 cycles/**small): 5.0 A
** High current at AC1 5: 5.0 A
Width dimensions: 22.5 mm
Height dimensions: 87.0 mm
Depth dimensions: 121.0 mm
Total weight: 185 g
Net weight: 175 g
Ambient temperature in degrees Celsius: -10 - 55 °C
THIS ARTICLE DESCRIBES THE PILZ/PILZ SAFETY RELAY PNOZ X1 POWER TYPE: AC/DC PRODUCTS, IF YOU ARE INTERESTED IN PILZ/PILZ SAFETY RELAYS, PLEASE ALSO CONTACT OUR CUSTOMER SERVICE, WE LOOK FORWARD TO YOUR CALL, WE HOPE THAT OUR TECHNOLOGY AND SERVICE CAN BRING YOU A BETTER EXPERIENCE.
|
More on that
|
The PILZ/Pilz safety relay PNOZ e3vp 2-channel wiring
Description: Safety relay (stand-alone) Input: 2 channel wiring, with/without short-to-contact detection (PSEN 2.1p/2.2p) Output: 2 safety outputs + 1 semiconductor-assisted output, delayed automatic/monitored start-up, UB 24 V DC, width: 22.5 mm, threaded plug-in ...
|
|
PILZ/Pilz safety relay PNOZ c2 Spring-loaded terminal 24DCV
Introduction: Safety relay (independent) Input: 2 channel wiring, short circuit detection via contact output: 2 N/O, 1 semiconductor. Manual start UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the unit's safety relay for evaluation with 2 semiconductor outputs ...
|
|
PILZ/Pilz safety relay PNOZ s4 24VDC 3 n/o 1 n/c
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
Pilz PNOZ yi1 4DI modular safety relay
Product description: Expansion module for the Pilz PNOZ yi1 4DI modular safety relay myPNOZ, 2 input functions, input functions and links, 2 signal outputs, 2 rotary switches for setting the start type and test pulse detection, LED display
input
Digit...
|
|
The PILZ safety relay PNOZ X1 is robust and compact with a total weight of 185 g
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
Modular safety relay from Pilz PNOZ yh1 2DI
Description: Head module of the modular safety relay myPNOZ, communication with the expansion module, supply voltage of myPNOZ, 1 input function, 2 test pulse outputs for detecting short-circuit contact contacts, 1 rotary switch for selecting functions, 1 for setting the type of start-up and ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ 2VQ Number 1 of auxiliary contacts
INTRODUCTION: PILZ/PILZ PNOZ 2VQ SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 3 N/O, 1 N/C, 2 N/O Delay UB 24 V DC, Width: 112.5 mm, Integral Screw Terminal, Emergency Stop Monitoring, Safety Gate, Power Failure Contact ...
|
|
The PILZ/Pilz monitoring relay PMD s10 has a height of 98 mm
Introduction: A true power monitor is monitored in a Sigma housing, and in the event of overload and underload, limit values can be set via display and saved to a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20mA and 0-10V DC, supply voltage: 24-240V AC/...
|
|
PILZ/Pilz safety relay PNOZ c1 height dimension 105 mm
Introduction: Safety relay (independent) input: 2 channel wiring, short circuit detection output by contact: 3 N/O, 1 N/C. Automatic/manual return UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the emergency stop monitoring device, highly compact safety gate.
...
|
|
PILZ safety relay PNOZ X7 Voltage 48VAC 2n/o
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ s50 C Dual channel 24DCV
Introduction: Safety relay PNOZsigma (stand-alone). Control/monitoring of inductive actuators such as brakes and valves according to PLe and SIL 3, UB 24/48 V DC, max. 3.5/1.75 A continuous current, max. 6.5/3.25 A output current, display of operating push-and-roll, plug-in springs ...
|
|
PILZ safety relay PNOZ s1 C 12.5×100×120mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/Pilz safety relay PNOZ s1 Voltage 24VDC 2 n/o
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ PNOZ s60 safety voltage monitoring relay Width 90 mm
Description: PNOZ s60 is an upgrade from the original PNOZ X series PU3Z for safe monitoring of single-phase or three-phase power supplies with neutral conductors. The product measures three-phase voltages and only activates safety circuits when values fall below a threshold. If the device is due to mechanical failure (e.g. on the main switch ...
|
|
PILZ/Pilz safety relay PNOZ s50 C 24V with a total weight of 276 g
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/PILZ SAFETY RELAY PST 4 FIXED SCREW TERMINAL 24DCV
Description: PILZ/Pilz PST 4 Safety relay (stand-alone) input: 2 channel wiring with short circuit detection output between contacts: 6 N/O, 4 N/C UB 24 V DC, width: 90 mm, integral screw terminal, safety gate monitor, simultaneous monitoring for approx. 4 s.
...
|
|
PILZ/PEEL MAGNETIC RELAY P2HZ X4P TWO-CHANNEL SHORT CIRCUIT DETECTION BETWEEN CONTACTS
Introduction: Safety relay (standalone) input: 1 N/O, 1 N/C per button output: 3 N/O, 1 N/C. UB 24 V AC, width: 22.5 mm, plug-in terminal of screw-on two-hand control/monitoring of two-hand buttons.
...
|
|
The PILZ safety relay PNOZ e1p has a height of 90.5 mm
Description: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts Detection output: 2 safety outputs + 1 semiconductor-assisted output Auto/monitor start, UB 24 V DC, width: 22.5 mm, screw-in plug-in terminal, emergency stop monitoring, safety gate ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X2C VOLTAGE 24AC/DCV
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ p1p 2 semiconductor output
Introduction: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts detection output: 2 semiconductor outputs, auto/monitor start-up. UB 24 V DC, screw-on plug-in terminal. Basic module safety relay power supply.
...
|
|
Contact
working hours
