Introduction: Safety relay (independent) input: 2 channel wiring, short circuit detection output by contact: 3 N/O, 1 N/C. Automatic/manual return UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the emergency stop monitoring device, highly compact safety gate.
Product Advantages:
Safe, simple, yellow
Space-saving, high-performance
Small size
Applies to basic functions
Product parameters
Certificates: CE, cULus Certification, EAC (Eurasian), TÜV, CCC
Operating modes: Auto Reset, Dual Channel, Manual Reset, Short Circuit Between Contacts Detection
Supply voltage (V): 24,0
Power Type: DC
Terminal type: Fixed
Termination Type: Spring-loaded terminals
Number of instantaneous safety contacts: 3
Number of time-delay safety contacts: 0
Number of auxiliary contacts: 1
Number of semiconductor outputs: 0
Stop Category: 0
Product standard: EN 60947-5-1
Maximum current I at DC13 (6 cycles/min): 5.0 A
Width dimensions: 22.5 mm
Height dimensions: 105.0 mm
Depth dimensions: 100.0 mm
Total weight: 170 g
Net weight: 160 g
Ambient temperature in degrees Celsius: -10 - 55 °C
This article introduces the PILZ safety relay PNOZ c1 height dimension 105 mm, if you are interested in the PILZ safety relay, please also contact our customer service, we look forward to your call, we hope that our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
PILZ/PILZ SAFETY RELAY PNOZ 2VQ Number 1 of auxiliary contacts
INTRODUCTION: PILZ/PILZ PNOZ 2VQ SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 3 N/O, 1 N/C, 2 N/O Delay UB 24 V DC, Width: 112.5 mm, Integral Screw Terminal, Emergency Stop Monitoring, Safety Gate, Power Failure Contact ...
|
|
PILZ/Pilz safety relay PNOZ s50 C Dual channel 24DCV
Introduction: Safety relay PNOZsigma (stand-alone). Control/monitoring of inductive actuators such as brakes and valves according to PLe and SIL 3, UB 24/48 V DC, max. 3.5/1.75 A continuous current, max. 6.5/3.25 A output current, display of operating push-and-roll, plug-in springs ...
|
|
PILZ/Pilz monitoring relay S1SW P depth dimension 121 mm
INTRODUCTION: THE PILZ/PILZ MONITORING RELAY S1SW P STATIC MONITORING IS USED TO MONITOR THE STATIONARY 2 AUXILIARY CONTACTS (C/O) OF DC AND THREE-PHASE MOTORS; Screw plug-in terminal, width: 22.5 mm; UB 24-240 V AC/DC。
...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X7 AMBIENT TEMPERATURE: -10 - 55 °C
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz monitoring relay PMD s20 insulation resistance 10-200 kOhm
Introduction: Insulation monitor in a Sigma enclosure to monitor the insulation of galvanically isolated power supplies. Limits can be set via a display and can be saved on a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20 mA and 0-10 VDC, supply voltage: 24-240 VA...
|
|
The PILZ safety relay PNOZ X1 is robust and compact with a total weight of 185 g
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
The PILZ/Pilz monitoring relay PMD s10 has a height of 98 mm
Introduction: A true power monitor is monitored in a Sigma housing, and in the event of overload and underload, limit values can be set via display and saved to a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20mA and 0-10V DC, supply voltage: 24-240V AC/...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X1 POWER SUPPLY TYPE: AC/DC
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ s4 24VDC 3 n/o 1 n/c
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
The PILZ/Pilz safety relay PNOZ e3vp 2-channel wiring
Description: Safety relay (stand-alone) Input: 2 channel wiring, with/without short-to-contact detection (PSEN 2.1p/2.2p) Output: 2 safety outputs + 1 semiconductor-assisted output, delayed automatic/monitored start-up, UB 24 V DC, width: 22.5 mm, threaded plug-in ...
|
|
PILZ/PEEL MAGNETIC RELAY P2HZ X4P TWO-CHANNEL SHORT CIRCUIT DETECTION BETWEEN CONTACTS
Introduction: Safety relay (standalone) input: 1 N/O, 1 N/C per button output: 3 N/O, 1 N/C. UB 24 V AC, width: 22.5 mm, plug-in terminal of screw-on two-hand control/monitoring of two-hand buttons.
...
|
|
PILZ PNOZ s60 safety voltage monitoring relay Width 90 mm
Description: PNOZ s60 is an upgrade from the original PNOZ X series PU3Z for safe monitoring of single-phase or three-phase power supplies with neutral conductors. The product measures three-phase voltages and only activates safety circuits when values fall below a threshold. If the device is due to mechanical failure (e.g. on the main switch ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ 10 AC1 AT 5.0 A
INTRODUCTION: PILZ/PILZ PNOZ 10 SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 6 N/O, 4 N/C. UB 48 V AC, width: 90 mm, integral screw terminals, emergency stop monitoring, safety gate.
...
|
|
Modular safety relay from Pilz PNOZ yh1 2DI
Description: Head module of the modular safety relay myPNOZ, communication with the expansion module, supply voltage of myPNOZ, 1 input function, 2 test pulse outputs for detecting short-circuit contact contacts, 1 rotary switch for selecting functions, 1 for setting the type of start-up and ...
|
|
The PILZ safety relay PNOZ e1p has a height of 90.5 mm
Description: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts Detection output: 2 safety outputs + 1 semiconductor-assisted output Auto/monitor start, UB 24 V DC, width: 22.5 mm, screw-in plug-in terminal, emergency stop monitoring, safety gate ...
|
|
PILZ/Pilz safety relay PNOZ p1p 2 semiconductor output
Introduction: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts detection output: 2 semiconductor outputs, auto/monitor start-up. UB 24 V DC, screw-on plug-in terminal. Basic module safety relay power supply.
...
|
|
PILZ safety relay PNOZ X7 Voltage 48VAC 2n/o
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X3.2 230VAC 24VDC
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
Pilz PNOZ yi1 4DI modular safety relay
Product description: Expansion module for the Pilz PNOZ yi1 4DI modular safety relay myPNOZ, 2 input functions, input functions and links, 2 signal outputs, 2 rotary switches for setting the start type and test pulse detection, LED display
input
Digit...
|
|
Pilz Safety relay PNOZ 2VJ net weight 600g screw terminals
INTRODUCTION: PILZ/PILZ PNOZ 2VJ SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 3 N/O, 1 N/C, 2 N/O time-delay UB-24 V DC, width: 112.5 mm, integral screw terminal, emergency stop monitoring, safety door, power failure contact ...
|
|
Contact
working hours
