Introduction: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts detection output: 2 semiconductor outputs, auto/monitor start-up. UB 24 V DC, screw-on plug-in terminal. Basic module safety relay power supply.
Product Advantages:
Suitable for high-load and high-volume applications
Robust
The drive can be shut down directly
Simple diagnosis
Push-in connection terminals
Redundant load switching
Product parameters
Certificates: CE, cULus Certification, EAC (Eurasian), TÜV
Application Options: Instantaneous Emergency Stop Monitoring, Safety Gate Monitoring
Operating Modes: Single-channel, Auto-Reset, Dual-Channel, Manual Reset, Inter-Contact Short Circuit Detection, Manual Reset Monitoring, Non-Contact Short Circuit Detection
Standards: EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1
Supply voltage (V): 24,0
Power Type: DC
Terminal type: Plug-in
Termination Type: Screw terminal
Number of semiconductor outputs: 2
Width dimensions: 45.0 mm
Height dimensions: 94.0 mm
Depth dimensions: 135.0 mm
Total weight: 295 g
Net weight: 285 g
Ambient temperature in degrees Celsius: -10 - 55 °C
This article introduces the PILZ safety relay PNOZ p1p 2 semiconductor output product, if you are interested in PILZ safety relays, please also contact our customer service, we look forward to your call, we hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
Modular safety relay from Pilz PNOZ yh1 2DI
Description: Head module of the modular safety relay myPNOZ, communication with the expansion module, supply voltage of myPNOZ, 1 input function, 2 test pulse outputs for detecting short-circuit contact contacts, 1 rotary switch for selecting functions, 1 for setting the type of start-up and ...
|
|
PILZ PNOZ s60 safety voltage monitoring relay Width 90 mm
Description: PNOZ s60 is an upgrade from the original PNOZ X series PU3Z for safe monitoring of single-phase or three-phase power supplies with neutral conductors. The product measures three-phase voltages and only activates safety circuits when values fall below a threshold. If the device is due to mechanical failure (e.g. on the main switch ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X7 AMBIENT TEMPERATURE: -10 - 55 °C
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/PEEL MAGNETIC RELAY P2HZ X4P TWO-CHANNEL SHORT CIRCUIT DETECTION BETWEEN CONTACTS
Introduction: Safety relay (standalone) input: 1 N/O, 1 N/C per button output: 3 N/O, 1 N/C. UB 24 V AC, width: 22.5 mm, plug-in terminal of screw-on two-hand control/monitoring of two-hand buttons.
...
|
|
PILZ/Pilz safety relay PNOZ c1 height dimension 105 mm
Introduction: Safety relay (independent) input: 2 channel wiring, short circuit detection output by contact: 3 N/O, 1 N/C. Automatic/manual return UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the emergency stop monitoring device, highly compact safety gate.
...
|
|
PILZ/PILZ SAFETY RELAY PNOZ 10 AC1 AT 5.0 A
INTRODUCTION: PILZ/PILZ PNOZ 10 SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 6 N/O, 4 N/C. UB 48 V AC, width: 90 mm, integral screw terminals, emergency stop monitoring, safety gate.
...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X1 POWER SUPPLY TYPE: AC/DC
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ s50 C 24V with a total weight of 276 g
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
Pilz Safety relay PNOZ 2VJ net weight 600g screw terminals
INTRODUCTION: PILZ/PILZ PNOZ 2VJ SAFETY RELAY (STAND-ALONE) INPUT: 1-/2 CHANNEL WIRING, SHORT CIRCUIT DETECTION WITH/WITHOUT CONTACTS. Output: 3 N/O, 1 N/C, 2 N/O time-delay UB-24 V DC, width: 112.5 mm, integral screw terminal, emergency stop monitoring, safety door, power failure contact ...
|
|
The PILZ safety relay PNOZ X1 is robust and compact with a total weight of 185 g
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ s3 24VDC width 17.5 mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ safety relay PNOZ s2 depth dimension 120 mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ safety relay PNOZ s1 C 12.5×100×120mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/Pilz monitoring relay S1SW P depth dimension 121 mm
INTRODUCTION: THE PILZ/PILZ MONITORING RELAY S1SW P STATIC MONITORING IS USED TO MONITOR THE STATIONARY 2 AUXILIARY CONTACTS (C/O) OF DC AND THREE-PHASE MOTORS; Screw plug-in terminal, width: 22.5 mm; UB 24-240 V AC/DC。
...
|
|
Pilz PNOZ yi1 4DI modular safety relay
Product description: Expansion module for the Pilz PNOZ yi1 4DI modular safety relay myPNOZ, 2 input functions, input functions and links, 2 signal outputs, 2 rotary switches for setting the start type and test pulse detection, LED display
input
Digit...
|
|
PILZ/Pilz safety relay PNOZ c2 Spring-loaded terminal 24DCV
Introduction: Safety relay (independent) Input: 2 channel wiring, short circuit detection via contact output: 2 N/O, 1 semiconductor. Manual start UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the unit's safety relay for evaluation with 2 semiconductor outputs ...
|
|
PILZ/PILZ SAFETY RELAY P2HZ X1 TWO-HAND CONTROL
Description: Safety relay (independent) input: 1 N/O, 1 N/C per pushbutton Output: 3 N/O, 1 N/C, 2 semiconductors UB 24 V AC, width: 45 mm, integral screw terminals, two-hand control, monitoring of the simultaneity of two-hand buttons.
...
|
|
PILZ/Pilz safety relay PNOZ s1 Voltage 24VDC 2 n/o
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/PILZ SAFETY RELAY P2HZ X3 DC13 AT 1.5 A
Introduction: Safety relay (stand-alone) input: 1 N/O, 1 N/C Output per pushbutton: 2 N/O, 1 N/C UB 24 V DC, width: 22.5 mm, integral screw terminals, two-hand controls, monitoring of the simultaneity of two-handed buttons.
...
|
|
PILZ/PILZ SAFETY RELAY PST 4 FIXED SCREW TERMINAL 24DCV
Description: PILZ/Pilz PST 4 Safety relay (stand-alone) input: 2 channel wiring with short circuit detection output between contacts: 6 N/O, 4 N/C UB 24 V DC, width: 90 mm, integral screw terminal, safety gate monitor, simultaneous monitoring for approx. 4 s.
...
|
|
Contact
working hours
