Description: Safety relay (standalone) input: 1-/2 channel wiring, with/without short circuit detection between contacts Output: 2 safety outputs + 1 semiconductor auxiliary output automatic/monitoring start, UB 24 V DC, width: 22.5 mm, threaded plug-in terminal, emergency stop monitoring, safety gate.
Product Advantages:
Simple logic operation (AND/OR) reduces wiring
More comprehensive diagnostics provide high availability
The comprehensive application of semiconductor technology eliminates the need for maintenance
There will be no failures due to contact welding, contamination, chatter, or heat
Continuous self-testing provides the highest degree of safety; Fault detection is independent of the on/off cycle
Long service life, even when functions are frequently operated or switched
Safe changeover operation is guaranteed even at minimum loads
Fast commissioning; Push-in terminals with spring-loaded and screw-on connections require no additional tools
Product parameters
Certificates: CE, cULus Certification, EAC (Eurasian), TÜV
Application Options: Instantaneous Emergency Stop Monitoring, Limit Switches, Light Grid Device Monitors. Level 2, typical, encoder device monitor. Level 2, atypical, encoder device monitor. Level 4, security gate monitoring
Operating Modes: Single-Channel, Auto-Reset, Dual-Channel, Short-to-Contact Detection, Start-up Test, Manual Reset Monitoring, Non-Contact-to-Contact Short-Detection, Self-Detection
Product standard: EN 60947-5-1
标准： DIN V VDE 801-1/A1, EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1, VDE 0116
Supply voltage (V): 24,0
Power Type: DC
Termination Type: Screw terminal
Terminal type: Plug-in
NUMBER OF INSTANTANEOUS SAFETY OUTPUTS: 2 ST
Number of test pulse outputs: 2
Stop Category: 0
Width dimensions: 22.5 mm
Height dimensions: 90.5 mm
Depth dimensions: 121.0 mm
Total weight: 135 g
Net weight: 120 g
Ambient temperature in degrees Celsius: -10 - 55 °C
This article introduces the PILZ safety relay PNOZ e1p with a height of 90.5 mm, if you are interested in the PILZ safety relay, please also contact our customer service, we look forward to your call, we hope that our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
PILZ/Pilz safety relay PNOZ c1 height dimension 105 mm
Introduction: Safety relay (independent) input: 2 channel wiring, short circuit detection output by contact: 3 N/O, 1 N/C. Automatic/manual return UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the emergency stop monitoring device, highly compact safety gate.
...
|
|
PILZ/Pilz monitoring relay S1SW P depth dimension 121 mm
INTRODUCTION: THE PILZ/PILZ MONITORING RELAY S1SW P STATIC MONITORING IS USED TO MONITOR THE STATIONARY 2 AUXILIARY CONTACTS (C/O) OF DC AND THREE-PHASE MOTORS; Screw plug-in terminal, width: 22.5 mm; UB 24-240 V AC/DC。
...
|
|
Pilz PNOZ yi1 4DI modular safety relay
Product description: Expansion module for the Pilz PNOZ yi1 4DI modular safety relay myPNOZ, 2 input functions, input functions and links, 2 signal outputs, 2 rotary switches for setting the start type and test pulse detection, LED display
input
Digit...
|
|
PILZ/PILZ SAFETY RELAY P2HZ X3 DC13 AT 1.5 A
Introduction: Safety relay (stand-alone) input: 1 N/O, 1 N/C Output per pushbutton: 2 N/O, 1 N/C UB 24 V DC, width: 22.5 mm, integral screw terminals, two-hand controls, monitoring of the simultaneity of two-handed buttons.
...
|
|
PILZ/Pilz monitoring relay PMD s20 insulation resistance 10-200 kOhm
Introduction: Insulation monitor in a Sigma enclosure to monitor the insulation of galvanically isolated power supplies. Limits can be set via a display and can be saved on a chip card. Relay outputs: 2 switching contacts. Analog output: current 4-20 mA and 0-10 VDC, supply voltage: 24-240 VA...
|
|
PILZ/Pilz safety relay PNOZ s1 Voltage 24VDC 2 n/o
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/PILZ SAFETY RELAY PNOZ X1 POWER SUPPLY TYPE: AC/DC
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ p1p 2 semiconductor output
Introduction: Safety relay (stand-alone) input: 1-/2 channel wiring, with/without short circuit between contacts detection output: 2 semiconductor outputs, auto/monitor start-up. UB 24 V DC, screw-on plug-in terminal. Basic module safety relay power supply.
...
|
|
PILZ safety relay PNOZ X7 Voltage 48VAC 2n/o
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ s2 C Push-in spring-loaded terminals
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ safety relay PNOZ s1 C 12.5×100×120mm
Introduction: The safety relays PNOZsigma combine many years of experience with today's state-of-the-art safety technology. Thanks to E-STOP relays, you can achieve maximum safety and cost-effectiveness with minimal effort. The emergency stop relay integrates a variety of functions in the square inch, and realizes multi-function with the smallest width.
|
|
PILZ/Pilz safety relay PNOZ e2.2p supply voltage 24DCV
Description: Safety relay (stand-alone) input: Class IIIA output according to EN 574: 2 safety outputs, 1 auxiliary output, semiconductor technology UB 24 V DC, width: 22.5 mm, screw plug-in terminal. Auto-start, connect multiple devices.
...
|
|
PILZ/PEEL MAGNETIC RELAY P2HZ X4P TWO-CHANNEL SHORT CIRCUIT DETECTION BETWEEN CONTACTS
Introduction: Safety relay (standalone) input: 1 N/O, 1 N/C per button output: 3 N/O, 1 N/C. UB 24 V AC, width: 22.5 mm, plug-in terminal of screw-on two-hand control/monitoring of two-hand buttons.
...
|
|
The PILZ safety relay PNOZ X1 is robust and compact with a total weight of 185 g
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ/Pilz safety relay PNOZ c2 Spring-loaded terminal 24DCV
Introduction: Safety relay (independent) Input: 2 channel wiring, short circuit detection via contact output: 2 N/O, 1 semiconductor. Manual start UB 24 V DC, width: 22.5 mm, spring-loaded terminal fixed to the front of the unit's safety relay for evaluation with 2 semiconductor outputs ...
|
|
PILZ/Pilz safety relay PNOZ e4vp screw-in plug-in terminal
Description: Safety relay (stand-alone) input: 2 channels of wiring with short circuit detection between contacts Output: 2 safety outputs + 1 auxiliary output of semiconductor technology, delayed automatic/monitored start-up, UB 24 V DC, width: 22.5 mm, screw-in plug-in terminal, connection of multiple devices, evaluation ...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X3.2 230VAC 24VDC
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
PILZ PNOZ s60 safety voltage monitoring relay Width 90 mm
Description: PNOZ s60 is an upgrade from the original PNOZ X series PU3Z for safe monitoring of single-phase or three-phase power supplies with neutral conductors. The product measures three-phase voltages and only activates safety circuits when values fall below a threshold. If the device is due to mechanical failure (e.g. on the main switch ...
|
|
PILZ/PILZ SAFETY RELAY P2HZ X1 TWO-HAND CONTROL
Description: Safety relay (independent) input: 1 N/O, 1 N/C per pushbutton Output: 3 N/O, 1 N/C, 2 semiconductors UB 24 V AC, width: 45 mm, integral screw terminals, two-hand control, monitoring of the simultaneity of two-hand buttons.
...
|
|
PILZ/PILZ SAFETY RELAY PNOZ X7 AMBIENT TEMPERATURE: -10 - 55 °C
Introduction: The reliability and robustness of the safety relay PNOZ X have been proven for a long time. They are used in a wide range of applications and are suitable for a wide range of safety applications. Each safety function uses a safety relay PNOZ X. Its technical characteristics are the use of passive and electromechanical ...
|
|
Contact
working hours
